Lift sling rigging company produce nylon rope cargo net, steel wire rope cargo net and high-strength webbing cargo net.
Letlooa la ho Phahamisa Cargo

A cargo lifting net turns a loose, stacked or bagged consignment into a single crane lift. The net closes around the whole load instead of choking individual pieces, and it carries that load from its corners rather than from one contact point, so cargo that cannot be repacked, banded or palletised can still be moved in one movement.
We manufacture cargo lifting nets in three woven constructions – high-tenacity nylon rope, galvanised steel wire rope and high-strength polyester webbing – across a rated capacity of 1 t ho 100 t. Ho bula letlooeng, net size, moeling, lifting points and colour are made to your drawing, and every net is proof-load tested in our own plant before it is packed.
- E lekantsoeng ka matla: 1 t – 100 t, stated for the way the net is rigged
- Ho bula letlooeng: 50 mm – 400 mm, chosen from the smallest dimension of the cargo
- Lintlha tsa ho phahamisa: 4 reinforced corners as standard, 8 points for a spreader beam
- Tšireletseho ntlha: 5:1 / 6:1 / 7:1 depending on construction
- Litokomane: capacity label, material test report and CE marking
- Litekanyetso: built to your nominated standard; ISO 9001 quality system
Which cargo lifting net suits your load?
The three constructions overlap in capacity, so the choice is normally decided by the cargo and the working environment rather than by tonnage alone. Use the table below as a starting point, then confirm the mesh, the net size and the lifting points with our engineers.
| Cargo | Recommended construction | Usual mesh | Bokhoni bo tloaelehileng |
|---|---|---|---|
| Bagged goods – fertiliser, lijo-thollo, seed, fepa | Polyester webbing or nylon rope | 100 mm | 2 t – 10 t |
| Palletised cartons, boxed goods | High-strength letlooa la ho phahamisa thepa | 100 x 100 mm | 2 t – 10 t |
| Litene, diboloko, split stone | Nylon rope net in bag form | 100 mm – 150 mm | 2 t – 25 t |
| Quarry run, aggregates, lithako tsa ho heletsa | Steel wire rope net | 150 mm – 300 mm | 10 t – 100 t |
| Likota, lehong le sahiloeng, lipalo | Nylon rope net, knotted | 200 mm – 300 mm | 2 t – 50 t |
| Steel plate packs, dingata tsa liphaephe, likarolo | Webbing net with edge protection, or wire rope net | 100 mm – 200 mm | 5 t – 50 t |
| Meropa, lithaere, likhoele | Nylon rope net or webbing net | 100 mm – 200 mm | 1 t – 10 t |
| Machined, painted or plated parts | Webbing net only – sephara, non-marking bands | 50 mm – 100 mm | 1 t – 20 t |
| Scrap metal, mixed abrasive bulk | Steel wire rope net | 200 mm – 400 mm | 10 t – 100 t |
| FIBC big bags, 1 t le 2 t | Nete ea marang-rang, or a purpose-made crane pallet cargo net | 50 mm – 100 mm | 1 t – 5 t |
What a cargo lifting net is – le seo e seng sona
A cargo lifting net is a woven lattice, not a bag and not a sling. Bands or strands cross at right angles to form an open mesh; the border and the corners carry the load; and the cargo sits inside the lattice rather than on top of it. That geometry is what makes a net useful: the load is distributed over a wide bearing face instead of being concentrated at a hook, a choke point or a fork pocket, so contact pressure drops and the surface of the cargo is left intact.
It differs from a sling in three practical ways. A net holds the cargo in three dimensions, so nothing can slide out sideways during the lift. A net can be loaded on the ground, spread flat, and only then closed around the goods, which means the goods never have to be lifted to be netted. And a net is rated as an assembly of corners, border and mesh, so its capacity is quoted for a stated rigging arrangement rather than as a single line pull.

The four elements that set the rating
The strand or the band. Thapo ea nylon, steel wire rope or flat webbing. This single choice sets the strength, the net weight, the surface contact and the resistance to abrasion, cut and heat.
The mesh opening. The size of the square or diamond aperture. It decides what stays inside the net and how much the net weighs. It is chosen from the smallest dimension of the cargo, never from the outside size of the net – a 6 m net with a 300 mm mesh will lose bricks through the mesh no matter how strong the rope is.
Moeli. A doubled or reinforced edge running the full perimeter, so the edge bands cannot unroll, spread apart or pull out under load. On a webbing net the border is double-layer stitched; on a rope net it is a doubled border rope spliced into the corners.
The lifting points. Four reinforced corner loops as standard, or eight points where the net is lifted from a spreader beam. Load must enter the corners and the border, never the middle of a panel. Loading the middle of a net is the most common way a sound net is destroyed in service.

Cargo lifting net technical parameters
The table below puts the three constructions side by side. Values are our standard production range; anything outside it is built to drawing, and the rating that applies is the rating of the net as it is rigged, not the capacity of the crane above it.
| Paramethara | Nylon rope net | Steel wire rope net | Nete ea marang-rang |
|---|---|---|---|
| Lintho tse bonahalang | 100% nayilone e phahameng (polyamide) multifilament | Thapo ea tšepe e entsoeng ka masenke; e se nang letheba 304 / 316 ka kopo | 100% tepo ea polyester e phahameng haholo; nylon or PP on request |
| Strand / sehlopha | 8 – 24 thapo ea mm, 3-strand laid or 8 / 12-strand braided (ho fihlela 32 mm ka kopo) | 6 x 19 for abrasion, 6 x 37 / 6 x 36WS for flexibility; 6 – 20 mm; FC or IWRC | 50 mm webbing standard; 25 / 75 / 100 mm ka kopo |
| Ho bula letlooeng | 100 – 300 mm, sekwere kapa taemane | 150 – 400 mm, sekwere | 100 x 100 mm lisekoere tekanyetso; 50 – 300 mm ka kopo |
| Kopanetsoeng / lock | Netmaker’s knot, or knotless braided splice | Pressed aluminium ferrule at every intersection | Woven band crossings, stitched at the border |
| Moeli | Thapo ea moeli e habeli, spliced into the corners | Continuous border rope, ferrule-locked to the mesh | Double-layer stitched border round the full perimeter |
| Lintlha tsa ho phahamisa | 4 mahlo a sekhutlo; 8-ntlha ka kopo | Pressed corner eyes with thimbles, or rings / master links | 4 reinforced corner loops; 8-point and ring fittings on request |
| E lekantsoeng ka matla | 1 t – 50 t | 2 t – 100 t | 2 t – 10 t e tloaelehileng; heavier to order |
| Tšireletseho ntlha | 5:1 / 6:1 / 7:1 | 4:1 / 5:1 / 6:1 | 7:1 |
| Elongation | hoo e ka bang. 18 – 22% nakong ea phomolo – absorbs shock load | Tlase haholo – the mesh keeps its shape under steady load | Tlase, hoo e ka bang. 7% moeling oa mojaro o sebetsang |
| Abrasion le ho khaola | E ntle; a single damaged strand can be replaced locally | E phahameng ho tse tharo | E ntle, but must be kept off sharp edges |
| Corrosion | Rot-proof; suited to wet and salt-water duty | Galvanised as standard; stainless for marine and chemical service | Rust-free polyester, UV e tsitsitse |
| Mocheso o sebetsang | -40 C ho +80 C | Hot and dirty service – confirm the duty with us | -40 C ho +100 C |
| Mmala | Bosoeu, or dyed to order | Sesetiloe / stainless finish | Orange high-visibility, putsoa, ntsho, botala kapa moetlo |
| Setifikeiti | CE, GS, ISO 9001; test report per net | CE, ISO 9001; CNAS and DNV certified facility | CE, GS, ISO 9001; test report per net |
Net size and rated capacity
Standard sizes are listed below. Bethe ea teraka, setshelo, hold and spreader dimensions are made to drawing, and the capacity quoted is the capacity of the finished net, tested before dispatch.
| Nete ea boholo (L x W) | Bokhoni bo tloaelehileng | Tšebeliso e tloaelehileng |
|---|---|---|
| 2.0 x 2.0 m | 1 t – 3 t | Meropa, likarolo tsa mochini, likaroloana tse nyane |
| 2.5 x 2.5 m | 2 t – 5 t | Palletised le mekotla ea thepa, ho kenya setshelo |
| 2.5 x 6.0 m | 4 t – 10 t | Thepa e telele, dingata tsa liphaephe, ho kenya teraka le tereilara |
| 4 x 4 ft (1.2 x 1.2 m) | 2 t – 3 t | Meroalo e menyane, meropa, likarolo tsa mochini (imperial markets) |
| 82 x 82 ho | 2 t – 5 t | Pallet e tloaelehileng ea mebaraka mebarakeng ea borena |
| 6.0 x 6.0 m | 10 t – 25 t | Thepa e kentsoeng ka bongata, lehong, matlakala |
| 8.0 x 8.0 m | 25 t – 50 t | Heavy bulk, lejoe, quarry and demolition work |
| E hahiloe ho taka | 1 t – 100 t | Bethe ea teraka, setshelo, hold and spreader beam dimensions |
Ho bula letlooeng: choose it from the smallest dimension of the cargo
Mesh is the parameter buyers most often get wrong, because it is chosen from the net size instead of from the load. The rule we apply is simple: the aperture must be smaller than the smallest dimension of the smallest piece that must not escape. The table below is the guide we use on quotation.
| Smallest cargo dimension | Cargo example | Mesh to specify |
|---|---|---|
| Tlas'a 50 mm | Bottles, small castings, nuts and bolts, components in bulk | 50 mm – closed or near-closed bag form |
| 50 – 100 mm | Litene, bagged fertiliser, boxed goods, FIBC big bags | 100 mm |
| 100 – 200 mm | Meropa, mabokose, split stone, lehong le sahiloeng | 150 – 200 mm |
| Fetile 200 mm | Li-blocks, likutu, matlakala, lithako tsa ho heletsa | 250 – 300 mm, kapa 400 mm in wire rope |
Lifting configuration and how the rating is stated
A cargo lifting net is rated as an assembly. The same net gives a different rating for a four-point vertical lift, a two-point lift and an eight-point lift from a spreader beam, because the number of load-bearing corners changes. Every net we supply is therefore labelled with its working load limit and, where a net is used in more than one arrangement, each arrangement is listed separately on the label. Quote the configuration you will actually use when you enquire – a rating copied from a catalogue without the configuration is not a rating.
Nylon rope cargo lifting net
A letlooa la ho phahamisa thepa ea nylon is knotted or braided from high-tenacity nylon rope. Each strand can move slightly inside its knot, so the net settles around an irregular stack instead of sitting on top of it, and nylon’s high elongation absorbs the shock when the crane takes up the slack. It is the usual choice for timber and logs, lejoe, meropa, lithaere, scrap and any load whose shape shifts as it is lifted.
Rope is also the most repairable construction: a damaged strand can be re-knotted or re-spliced locally and the net re-inspected, which matters on a site where a net is working daily. For polypropylene rope in the same construction, bona le polypropylene rope cargo net sling.

Steel wire rope cargo lifting net
A steel wire rope cargo lifting net is cross-woven from galvanised wire rope and locked at every intersection with a pressed aluminium ferrule, so the mesh cannot open up or distort when the net is dragged across a quay or a truck bed. Wire rope is the construction for abrasion, mahlakore a bohale, hot surfaces and long service with little maintenance – quarry run, aggregates, lithako tsa ho heletsa, scrap and heavy bulk.
It is the heaviest of the three and the least forgiving to finished surfaces, so it is normally specified where the cargo is rough. Where a wire rope net has to handle dressed material, we supply the same construction with sheathed contact sections, using the rope from our matjeketjane a thapo mefuta-futa.

High-strength webbing cargo lifting net
A high-strength webbing cargo lifting net is woven from flat polyester webbing. The bands cross at right angles to form an open square mesh, the border and corners take the load, and the whole net is soft enough to sit against bagged, boxed, painted or machined cargo without marking it. It carries the widest bearing face of the three constructions at the lowest net weight, which is why it is the default for palletised, bagged and unitised cargo in ports, on trucks and on site cranes.
Polyester has low elongation, so the mesh keeps its shape while the crane takes up the slack and the load stays square. The webbing is woven in our own mill, which is why band width, mmala, mesh and capacity can be tuned to the load instead of bought in from a catalogue. It is the same webbing used in our matjeketjane a tepo le matjeketjane a sa feleng a chitja, so a net and a sling on the same lift are matched in elongation and colour coding.


How a cargo lifting net is rigged
- Four-point lift from a single hook. The four corner loops are gathered onto the hook or a master ring, so the net closes around the cargo as the crane takes up. This is the standard arrangement for bagged, palletised and unitised loads.
- Eight-point lift from a spreader beam. The net stays square and the load stays level, which is what a long or wide consignment needs. Tsa rona ho phahamisa sephara takes the eight points and keeps the legs vertical.
- Foromo ea mokotla. A closed three-dimensional net for loose goods that must not escape – litene, split stone, bottles, small castings.
- Flat net, cargo inside the mesh. For palletised, bundled or unitised loads that only have to be held together during the transfer.
Ho sa tsotellehe hore na tokisetso ke efe, load must go into the corners and the border. Three habits destroy nets faster than any cargo: loading the middle of a panel, ho hula letlowa ka nqane ka krene, and lifting on fewer than the full set of lifting points.
What we need to quote a cargo lifting net
| Boitsebiso | Hobaneng ho le bohlokoa |
|---|---|
| Ho jara boima le sebopeho sa mojaro | Sets the rated capacity and the number of load-bearing strands or bands under the cargo |
| Net length x width | The net must be larger than the load footprint so the cargo sits inside the mesh, eseng hodima yona |
| Ho bula letlooeng | 100 x 100 mm is our webbing standard; smaller or loose items need a smaller aperture |
| Strand diameter or band width | Sets strength and net weight; band width also sets the bearing face on the cargo |
| Lintlha tsa ho phahamisa | Four corners as standard, or eight points and rings for a spreader beam |
| Crane, hoko kapa sephara | Determines whether the corners carry eyes, mehele, shackles or thimbles |
| Tikoloho | UV, metsi a letsoai, offshore or high-temperature duty decides the material and the treatment |
| Litokomane | Letšoao la CE, tlaleho ea teko, declaration of conformity or own-brand labels |
Tlhahlobo: what to check and when to retire a net
Inspect before every lift and record a formal inspection at the interval your site requires. Check the corner loops and the corner stitching first – that is where wear starts – then work round the border and the mesh.
| Check | Retire the net if |
|---|---|
| Corner loops and corner stitching | Stitching is broken, the loop is deformed, or the ring / thimble is cracked or worn |
| Moeli | The border rope or border band is cut, unravelled or pulled out of the mesh |
| Strands or bands | Any load-bearing strand or band is cut, deeply abraded, heat-glazed or chemically stained |
| Knots and ferrules | A knot has slipped, or a ferrule is cracked, displaced or corroded through |
| Webbing | Bands are cut, powdered by UV, or contaminated with oil, paint or chemicals that cannot be removed |
| Labels | The capacity label is missing or illegible – an unlabelled net cannot be rated |
Never repair a net by knotting a broken strand, welding a wire rope or heating a band. Repairs belong to the maker or to a competent person using the original materials, followed by a re-test where the standard requires it. Store nets clean, dry and off the ground, ho tsoa letsatsing le otlolohileng.
Where cargo lifting nets are used
| Lekala | Seo letlooa le se etsang |
|---|---|
| Li-ports le li-terminals | Ho kenya setshelo le ho tlosa lintho, phahlo e phalletseng le e phuthetsweng, quay and hold work with a net that is soft, rust-free and easy to fold |
| Tšepe le boqapi | Lipakete tsa lipoleiti, mangata, machined parts and stillage loads where the surface must not be marked |
| Lejoe, quarry and aggregates | Split stone, diboloko, cobbles and abrasive bulk; wire rope where cut resistance decides the service life |
| Lehong le lihlahisoa tsa meru | Likota, sawn packs and poles – a rope net settles around an irregular stack as it is lifted |
| Offshore and marine | Deck and over-the-side transfer; nylon and polyester drain freely and do not rust |
| Temo le mekotla e mengata | Manyolo, lijo-thollo, peo le ho fepa ka mekotleng le mekotleng e meholo, lifted whole without repacking |
| Recycling and scrap | Mixed and abrasive scrap, where a wire rope net outlasts a textile one |
| Vehicle and plant loading | RoRo and breakbulk loading, where a wide net spreads the load across the body and chassis; bona tsa rona letlooa la ho phahamisa koloi mefuta-futa |
Two neighbouring ranges are often quoted with a lifting net: heavy duty truck cargo nets le container cargo nets for securing rather than lifting, le matlooa a thapo a sireletsehileng where the net protects people instead of holding cargo. Tell us which duty applies and we will confirm the construction – a securing net is not rated for lifting, and a lifting net is not a fall-arrest product.
Lipotso tse botsoang khafetsa
What is the difference between a cargo lifting net and a cargo net?
A cargo net is a general term that covers lashing, securing and climbing nets as well as lifting nets. A cargo lifting net is a rated assembly: it is designed for a stated working load limit, lekoa, labelled and supplied with documentation. If a net has no capacity label, treat it as a securing net and never lift with it.
How do I choose between nylon rope, wire rope and webbing?
E kgohlahetseng, hot or abrasive bulk points to steel wire rope. Cargo that must not be marked points to webbing. Irregular loads that have to settle into the net, and wet deck work, point to nylon rope. Where two of those apply at once, tell us and we will recommend the construction with the trade-off made explicit.
What safety factor should I specify?
Our standard ranges are 5:1, 6:1 le 7:1 for rope and webbing nets and 4:1 ho 6:1 for wire rope nets. The factor must satisfy the standard your site works to, so confirm it at enquiry rather than assuming the lowest option is acceptable.
Can a cargo lifting net be made to my size and mesh?
Ee. Boholo, letlooeng, strand diameter or band width, palo ea lintlha tsa ho phahamisa, 'mala le bokhoni bohle li entsoe ho laela, ho kenyelletsa le bethe ea literaka, setshelo, litekanyo tsa ho ts'oara le tsa sephara. Send a drawing or the internal dimensions of the space the net has to work in.
Will the net hold loose material such as bricks or split stone?
Ee, in bag form with the correct mesh. The aperture must be smaller than the smallest piece, and the net must be closed on all sides. Where material is very fine or very sharp, we will normally propose a smaller mesh in a heavier construction.
Can the net be used in a marine or offshore environment?
Ee. Polyester and nylon nets are UV stabilised and rust-free, wire rope nets can be supplied galvanised or in stainless steel, and all three drain freely on deck. For offshore duty, tell us the salt-spray exposure and the inspection regime so the material and coating are matched to it.
Is a test certificate supplied with each net?
Ee. Each net leaves the plant with a capacity label and a material test report, and our facility holds CNAS, CE and ISO 9001 setifikeiti. Li-labels tsa mofuta oa hau, printed markings and declarations of conformity are available on OEM orders.
Ke palo e fokolang ea taelo e kae?
There is no fixed minimum for standard constructions – a single net for a trial is possible, and batch quantities can combine mixed sizes and mixed constructions in one order. Mixed pallets are also acceptable where the export packing allows it.
How is a cargo lifting net packed for export?
Folded and strapped with the label and test report attached, then bag or crate packed as agreed. Export packing is built to survive sea freight, and nets can be supplied with a repair kit and a spare corner loop where the customer maintains its own fleet.
Can you print our logo or brand on the net?
Ee. We weave and print webbing in house, so brand names, capacity text, fleet numbers and colour coding can be incorporated in the net rather than added as a tag. Send the artwork with the enquiry.
Why buy cargo lifting nets from Lift Sling Rigging Company
- 40 years of lifting equipment manufacturing – founded in 1985 naheng ea Taizhou, Jiangsu, ka tse fetang 200 employees and one of China’s largest sling and net production bases.
- We weave our own webbing and make our own rope nets – bophara ba sehlopha, mmala, mesh and capacity are under our control, so a net is tuned to the load instead of being bought in from a catalogue.
- Own testing laboratory and a 1000 t rapameng teko mochini – breaking load is tested per net and documented; the facility holds CNAS, CE and DNV certification and 15 litokelo tsa molao.
- One supplier for the whole cargo range – matlooa a phahamisang thepa, matjeketjane a tepo, matjeketjane, matjeketjane a thapo, spreader beams, liropo tsa nylon, thapo e hula likausi and safety nets.
- OEM le ODM – own-brand labels, tepo e hatisitsoeng, custom colours and export packing for distributors and end users.

Request a cargo lifting net quotation
Send the load weight and shape, the net size, ho bula letlooeng, the lifting points and the environment – or a drawing of the truck bed, setshelo kapa ho tshoara letlooa le tlameha ho lekana. Baenjiniere ba rona ba tla netefatsa kaho, the rated capacity, the strand or band size and the packing, and quote in one reply. Ho bua ka eona pele, ikopanye le baenjiniere ba rona; tsa rona certification and test records li fumaneha ka kopo.
Phahamisa Sling Rigging Company
Lifute Industrial Park, Motse oa Taizhou, Profinseng ea Jiangsu, China
Mohala: +86 523 8693 5818 | WhatsApp: +86 180 6600 2268 | E-mail: lift98@jslift.com
HS khoutu: 630790


