Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Yika Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

We build it from 1 m si 30 m doko ipari, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the yika sling ibiti o. The tier below is the 40 tonne yika sling; the tier above is the 60 tonne yika sling. For the whole heavy series see heavy duty round slings.

Kini awọn 50 t figure actually buys you
The number on the sleeve is the working load limit of ẹsẹ kan, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
| Iṣeto ni | Okunfa | Agbara |
|---|---|---|
| Kanna kan, inaro | × 1.0 | 50 t |
| Kanna kan, fun pa | × 0.8 | 40 t |
| Kanna kan, agbọn ni 0-7 ° | × 2.0 | 100 t on the sling |
| Kanna kan, agbọn ni 7-45 ° | × 1.4 | 70 t on the sling |
| Kanna kan, agbọn ni 45-60 ° | × 1.0 | 50 t |
| Kannakanna meji, 0–45° lati inaro | × 1.4 | 70 t ṣeto |
| Four slings, 0–45° lati inaro | × 2.1 | 105 t ṣeto |
Read the table from the load backwards. A 50 t fifuye lori meji ese aini 50 t slings ni 0-45 ° (70 t ṣeto) ati 60 t slings once the legs pass 45°. Meji 30 t slings ko ṣe 60 t, and two 40 t slings gbe 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Nibo 50 t sits against the tiers either side
At this size the sling is rarely the weak link: ìkọ, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Sling | Inaro, ẹsẹ kan | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t lori awọn ẹsẹ meji, pẹlu ala |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
Nikan kan 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
Awọn mojuto gbe ẹrù, apa aso pinnu aye
A yika sling jẹ meji ìwé ninu ọkan, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed ati ki o gbe lai lilọ; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: gige, snags, glazing, kemikali idoti, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Eru ojuse ni a Kọ, ko kan Rating
The phrase describes the sleeve and the standard of make. A 50 t sling ni 50 t ohunkohun ti apo; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the ė apo yika sling — on a clean indoor lift it is money spent on nothing.

Ara lile nilo yara
A 50 t ara ko ni tẹ yika kan ju rediosi ona a 10 t ọkan ṣe. Bi ofin ṣiṣẹ, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Jiometirika wiwọ ni a maa n dahun pẹlu ara to gun, a gbígbé tan ina lati mu awọn ẹsẹ sunmọ inaro, tabi a yika sling pẹlu oju ti a ṣe si ipari gigun.
Imọ paramita
| Paramita | Sipesifikesonu |
|---|---|
| Ọja | 50 t heavy duty polyester lifting sling, ailopin yika sling, 50,000 kg yika gbígbé sling |
| Ikole | Tesiwaju ni afiwe filament mojuto ni a hun tubular apo, ni pipade sinu ohun ailopin lupu; ko si irin ni fifuye ona |
| Koju | Polyester ti o ni agbara giga (PES) multifilament, ni afiwe dubulẹ, epo-eti |
| Ọwọ | Eru ojuse hun ga-tenacity poliesita, nikan Layer bi bošewa; ė apo lati paṣẹ |
| Iwọn fifuye ṣiṣẹ | 50,000 kg (50 t), ese kan, inaro |
| Fifọ fifuye | 350,000 kg ni a 7:1 ifosiwewe |
| Ailewu ifosiwewe | 7:1 bi bošewa; awọn ifosiwewe miiran ti a ṣe lati paṣẹ nibiti ọja nilo |
| Ilọsiwaju ni WLL | Ni isunmọ 2–3 % |
| Iwọn otutu iṣẹ | -40 °C si +100 °C |
| Ipari to munadoko | 1–30 m made to order; kere ipari waye ni yi agbara |
| Àwọ̀ | Orange bi bošewa; awọn awọ apa aso miiran lati paṣẹ |
| Siṣamisi | WLL ati ipari tejede lori apo; aami sewn pẹlu WLL, ipari, tẹlentẹle, boṣewa ati ọjọ |
| Standard | IN 1492-2 ati ASME B30.9 ikole iwa |
| Idanwo | Ẹri ti kojọpọ ṣaaju fifiranṣẹ; igbasilẹ idanwo ti baamu si nọmba ni tẹlentẹle |
| Iṣakojọpọ | Coil ni a poli apo, ike paali; pallet tabi crate lori ìbéèrè |
| MOQ & OEM | MOQ kekere fun aṣẹ idanwo kan; OEM lori ipari, awọ apa aso, okun mojuto, aami akọkọ ati iṣakojọpọ |
Gigun: effective length or circumference
Sling ailopin ko ni opin, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, ati ni 50 t it is an expensive one to correct after the event.
| Ti sọ bi | O gba | Ti a lo fun |
|---|---|---|
| Munadoko ṣiṣẹ ipari | Idaji ayipo - kio si isalẹ lati fifuye ati ṣe afẹyinti | Inaro ati choked gbe soke, nibiti a ti mọ giga ikele |
| Ayika | Awọn ni kikun lupu ipari | Agbọn gbe soke, ibi ti awọn girth ti awọn fifuye iwakọ awọn ipari |
A 4 m doko ipari jẹ ẹya 8 m lupu. On our slings the figure printed on the sleeve is the effective length, nitorina titẹ ati asọye nigbagbogbo gba. Fun agbọn gbe soke, take the girth of the load, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, ti o jẹ kanna bi a ra a kere sling.
Siṣamisi, serial and proof-load traceability
Loke 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- A sewn label carries the WLL, ipari, tẹlentẹle, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.

Nibo a 50 t sling earns its place
At this capacity the sling is chosen for what it does kii ṣe do to the load — a wire rope grommet carries the same figure. The difference is contact.
- Precast girders ati Afara apa. Ọkan sling ni kọọkan opin, girder gbe ipele; apa aso aabo fun awọn akoso oju ati chamfer.
- Steel coils and plate packs. Agbọn labẹ idii, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Ayirapada, generators and machine beds. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Ọkọ ati module ohun amorindun. Ojuami mẹrin pẹlu tan ina loke, ibi ti sling igun ni awọn oniyipada ti o pinnu ṣeto.


Ayewo, itoju ati feyinti
Ṣayẹwo ṣaaju lilo gbogbo, ati ni deede ni aarin akoko ijọba rẹ nbeere. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: gige, snags, glazing, melts, kemikali idoti.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Aami ati sita: if the WLL or the length can no longer be read, kànnàkànnà ko le wa ni wadi.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, ooru glazing, mojuto ti o ti lọ lile tabi lumpy, chemical attack or a missing label.
- Itaja coiled ati pa awọn pakà, kuro ni oju-ọjọ ati kuro ninu ooru, olomi ati weld spatter; never store a sling wet in a closed bag, and never drag one under load.
Nigbagbogbo beere
Can one 50 t sling gbe soke 100 t ninu agbọn?
Lori sling ẹgbẹ, beeni - 100 t ni 0-7 °. Ni asa ìkọ, ọna asopọ oluwa tabi tan ina loke o tun ni lati ni iwọn fun 100 t, ati ni iwọn yi Kireni nigbagbogbo kii ṣe. Ti o ni idi ti agbọn ni 50 t jẹ ipinnu mimu ni akọkọ ati ipinnu agbara keji.
Do two 50 t slings gbe soke 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, ati 50 t once the legs open past 45°. A genuine 100 t fifuye lori meji ese aini 75 t slings, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester jẹ ipilẹ-idi gbogbogbo: kekere na, ti o dara abrasion aye, -40 si +100 °C, lowest cost at this rating. A UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, ga iyan, tàbí kànnàkànnà tí a ní láti gbé sókè àkàbà.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m tabi 8 m?
Sọ kini apejọ ti o tumọ si. A 4 m doko ipari jẹ ẹya 8 m lupu. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, add the girth of the load to the headroom and quote that.
What documentation comes with the sling?
A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.
Can the sleeve be replaced or repaired?
Rara. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Beere kan 50 t yika sling finnifinni
Send the lift, get a drawing and a price
Fifuye fun ẹsẹ kan, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Effective length or circumference, ayika, and any sleeve or marking requirement.
Gbe Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, China · HS koodu 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Awọn ọja ti o jọmọ
- Gbogbo yika slings, 1–1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T poliesita yika slings — for 40 t loads on two legs;
- 60 tonne yika sling — the tier above;
- Heavy duty round sling range - 50 t ati loke, heavier sleeves;
- Sling yika pẹlu awọn oju — a measured length and two pick-up points;
- Alapin webbing sling — the same rating in a thinner profile;
- Awọn ina gbigbe — to keep multi-leg sets closer to vertical.
