Danh mục sản phẩm

Double Ply Endless Lifting Sling

Mô tả ngắn:

Lift sling rigging company produce Double Ply Endless Lifting Sling,3 Ply Endless Nylon Flat Sling,2 Ply Polyester Endless Lifting Sling,Double Ply Endless Nylon Lifting Sling,2-Ply Endless Type Web Sling,2 ply Endless Polyester sling,2-Ply Endless Type Web Sling,2-Ply Endless Lifting Web Sling,2 Ply Endless Polyester Web Sling,3-Ply Endless Polyester Lifting Sling,Three Ply Endless Nylon Sling,,4 Ply Endless sling,4 Ply Endless Polyester Lifting Sling,4 ply Endless Nylon Lifting Sling,Double Ply Endless Webbing Sling,Three Ply Endless Webbing Sling,Four Ply Endless Webbing Sling.

Double ply endless sling: two layers in one band, more capacity at the same width, more cushioning. 1-30 tại 7:1 hai MỘT 1492-1; 3-ply and 4-ply to order.

Chi tiết sản phẩm

Lift sling rigging company produce Double Ply Endless Lifting Sling,3 Ply Endless Nylon Flat Sling,2 Ply Polyester Endless Lifting Sling,Double Ply Endless Nylon Lifting Sling,2-Ply Endless Type Web Sling,2 ply Endless Polyester sling,2-Ply Endless Type Web Sling,2-Ply Endless Lifting Web Sling,2 Ply Endless Polyester Web Sling,3-Ply Endless Polyester Lifting Sling,Three Ply Endless Nylon Sling,,4 Ply Endless sling,4 Ply Endless Polyester Lifting Sling,4 ply Endless Nylon Lifting Sling,Double Ply Endless Webbing Sling,Three Ply Endless Webbing Sling,Four Ply Endless Webbing Sling.

Endless lifting sling · duplex and multi-ply · 2, 3 Và 4 lớp

Double Ply Endless Lifting Sling

Two layers in the one band: more capacity at the same width, a thicker and more forgiving bearing face, and abrasion reserve behind the first layer. 1 đến 30 tại 7:1 hai MỘT 1492-1, with 3-ply and 4-ply built to order.

2/3/4 layers in the band 1–30 phút phạm vi 7:1 hai MỘT 1492-1 25–300mm độ rộng băng tần
Two yellow double ply endless lifting slings showing the thicker doubled band

 

A double ply endless lifting sling is the duplex build of the closed loop. The band is woven as two layers rather than one, lapped over itself and closed with dense parallel stitching, không có mắt, no shackles and no metal anywhere on the article. In the trade it also appears as the 2-ply endless sling, and the same construction carries on upward: the 3-ply and 4-ply endless webbing slings in this range are the same idea with three and four layers in the band.The reason to specify it is not complicated. Capacity on a flat sling comes from width and fibre, and at some point the band is already as wide as the job allows — the load is narrow, the hook is small, the gap is tight. The second layer buys capacity without buying width. The same second layer is also more material between the load and the core of the band, which is what changes the way the sling behaves on an edge, on a coated surface and on anything that bruises.

The trade-off in one line. Duplex gives more capacity at the same width, a stiffer band that sits flatter over an edge, and more abrasion reserve — at the cost of weight and suppleness. Below roughly 6 t, and wherever the loop has to fold into a pocket, cái single ply build is the better default.

Hai, three and four ply: what the number changes

Ply is the number of layers woven into the one band the loop is made from — not two slings, and not two bands side by side. Each layer added does three things at once, and the third is the one buyers ask about least and notice most:

  • It thickens the section. The band becomes a deeper, stiffer beam in cross-section, which is why it lies down on the load instead of draping over it.
  • It adds capacity at the same width. That is the whole reason duplex exists above the single-ply ladder — the published range runs to 30 t, trở lên 10 t the ladder itself specifies duplex.
  • It adds cushioning. The extra layers sit between the load and the load-bearing core of the band: contact pressure spreads over a thicker, more compliant stack, and an edge has more material to work through before it reaches anything structural. That is why 3-ply and 4-ply are asked for on precast, machined and coated surfaces rather than on plain steel.
Two yellow double ply endless lifting slings showing the thicker doubled band
Two layers in one band: the same outline as a single ply loop, twice the section, and a stiffer bearing face that sits down on the load.

The four builds, bên cạnh nhau

The comparison below is qualitative on purpose: this site publishes capacities and widths for the single-ply and duplex ladders, and builds 3-ply and 4-ply to order. độ dày, weight and working load limit for those two are therefore confirmed against the order, not taken from a table on a web page.

Bàn 1 — Single ply, lớp đôi, 3-ply and 4-ply
Lớp đơn Lớp đôi (hai mặt) 3-lớp 4-lớp
Layers in the band Một Hai Ba bốn
Phần Thinnest in the range Roughly twice the single-ply section Thicker again Thickest build we make
Capacity at the same width Published ladder Higher — the reason duplex exists above the single-ply range Built to order Built to order
Cushioning on the load Đường cơ sở Noticeably more compliant stack More again The most forgiving face
Xử lý Folds small, tight radius Cứng hơn, sits flat on the hook and the load Stiffer again Least supple; carried and stored flat
Where it is asked for General yard work, tight gaps, đường kính nhỏ High capacity in a narrow width, rough edges, heavy abrasion Precast, machined and coated surfaces Heaviest duty, maximum cushioning
Published data Ladder on the single ply page Ladder and ply column on this page Confirmed on the acknowledgement Confirmed on the acknowledgement

Dung tích: where the ply column turns over

Working load limits are straight lift at 7:1 hai MỘT 1492-1, with the ply column exactly as this site publishes it. Read it as an instruction, not a menu: từ 2 t upward either build will do, trở lên 10 t the ladder itself says duplex.

Bàn 2 — Published capacity ladder with the ply column
WLL, nâng thẳng Màu sắc Chiều rộng tham chiếu lớp Phạm vi chiều dài Nghẹt thở (× 0.8)
1 t màu tím Xác nhận theo đơn đặt hàng Đơn 0.5 – 100 tôi 0.8 t
2 t Màu xanh lá 50 mm Đơn / hai mặt 1 – 100 tôi 1.6 t
3 t Màu vàng 75 mm Đơn / hai mặt 1 – 100 tôi 2.4 t
4 t Xám 100 mm Đơn / hai mặt 1.5 – 100 tôi 3.2 t
5 t Màu đỏ 125 mm Đơn / hai mặt 1.5 – 100 tôi 4.0 t
6 t Màu nâu 150 mm Đơn / hai mặt 1.5 – 100 tôi 4.8 t
8 t Màu xanh da trời 200 mm Đơn / hai mặt 2 – 100 tôi 6.4 t
10 t Quả cam 250 mm Đơn / hai mặt 2 – 100 tôi 8.0 t
Bên trên 10 t Không có mã màu Xác nhận theo đơn đặt hàng song công Để đặt hàng Nhãn chi phối

The range as a whole runs 1 đến 30 t, 25 mm đến 300 mm và rộng hơn, finished loops 0.5 tôi đến 100 tôi, Tại 7:1 standard with 5:1, 6:1 Và 8:1 đặt hàng. Final width, trọng lượng lớp và thành phẩm được xác nhận trên xác nhận đơn hàng.

Four endless slings in white, màu tím, green and black showing the EN 1492-1 mã màu
Colour marks the capacity band, not the ply: màu tím 1 t, màu xanh lá 2 t, trở lên 10 t no colour code at all — the label is then the only rating.

Where the second layer earns its keep

Duplex and the heavier plies are bought for four situations, and in each one a wider single band is either impossible or second best:

  • The capacity does not fit the width. A narrow load or a small hook caps the band width; the ply is what is left to raise the figure.
  • The edge is rough rather than sharp. Not a burr that will cut — the kind of edge that abrades. A doubled band has a second layer behind the first, so wear has further to go before the load path is compromised.
  • The surface must not be bruised. tráng, sơn, machined or precast faces are where the extra thickness reads as extra cushioning: a thicker, more compliant stack over the same footprint.
  • The band must sit flat. A duplex band is stiffer and lies down across a plate or a machined face instead of curling up at the edges, which keeps the contact full width.

Three and four ply, honestly

The 3-ply and 4-ply endless slings in this range are the same construction taken further: a third and a fourth layer in the band, a thicker section again, more capacity at a given width and a more forgiving face. They are built to order. We do not publish a web table for them because the figure depends on the weave, the fibre and the finished width, and a number on a page that has not been proof tested is worse than no number at all.

What we will do is quote them properly: tell us the load, quá giang, the width you can live with and the surface you are protecting, and the ply, độ dày, weight and working load limit come back on the acknowledgement with the test certificate behind them.

Heavy white endless lifting sling coiled on a dark background
The doubled band keeps its shape when coiled: less creasing into the weave, and a section that lies flat on the hook.

Một khớp, and it is thicker here

Một chiếc địu vô tận được sử dụng vô tận, không liền mạch. Dải được quấn lên chính nó và đóng lại bằng các hàng khâu song song dày đặc, and that lap is the only made connection in the load path. On a multi-ply build the lap is thicker and the stitching passes through more layers, so inspect both faces: mũi khâu bị đứt hoặc bị kéo, a lap starting to open, and abrasion where the lap crosses an edge.

Past the joint the loop is one continuous band, and on a duplex or 3-ply sling there is no sleeve hiding the core — every part of what is carrying the load is visible on the face. That is the practical difference from a round sling, where only the sleeve can be inspected.

Three hitches, same loop

The label figure is the straight-lift rating and every other arrangement is derived from it. Size to the hitch the crew will rig.

Bàn 3 - Hệ số chế độ theo trục trặc
Xô Yếu tố chế độ Ý nghĩa của nó trên trang web
Thẳng đứng × 1.0 Hình nhãn áp dụng trực tiếp
Nghẹt thở × 0.8 MỘT 4 t tải trong một cuộn cảm cần một 5 t sling — the wrap grips as the load comes on
Rổ, chân gần thẳng đứng × 2.0 Both sides of the loop carry the load and the bearing face is doubled
Rổ, 7°–45° × 1.4 As the legs open the rating falls; plan the angle, không chỉ cân nặng
Rổ, 45°–60° × 1.0 At wide angles the basket advantage is gone

Chiều dài: circumference or effective working length

Một vòng khép kín không có đầu để đo giữa, so the trade quotes the same sling two ways and they differ by about a factor of two. Circumference is the perimeter of the loop; effective working length is the usable height you get, roughly half the circumference because the loop is doubled when it hangs.

Bàn 4 — The same sling under both conventions
Được trích dẫn như Nó đo lường những gì Cùng một chiếc địu bằng
Đường tròn The perimeter of the loop — total band in the article 2 tôi
Chiều dài làm việc hiệu quả Chiều cao có thể sử dụng; the loop doubles when it hangs 1 tôi
Orange heavy duty endless sling folded into a loop on blue cloth
Orange is the 10 t band in the published ladder; from there upward the build moves to duplex rather than to a wider single band.

Chất xơ, colour and marking

The standard build is high-tenacity polyester (PES): no more than 3% elongation at the working load limit and 10% ở tải phá vỡ, so the hook height stays predictable, with a working range of −40 °C to +100 °C. Nylon takes the shock and abrasion duties, polypropylene the wet and the cheap, and UHMWPE and aramid the strength-to-weight and heat cases.

Colour follows EN 1492-1 and marks the capacity band, never the ply — violet 1 t, màu xanh lá 2 t, màu vàng 3 t, xám 4 t, màu đỏ 5 t, màu nâu 6 t, màu xanh da trời 8 t, quả cam 10 t — with one black transverse stripe per tonne as an optical second check. Bên trên 10 t there is no colour code and the sewn label is the only rating: giới hạn tải làm việc, vật liệu, tiêu chuẩn, mã độ dài và truy xuất nguồn gốc.

White endless webbing sling laid out on gravel showing one lapped joint
One lap, stitched through the doubled band. On a multi-ply sling the joint is thicker, so it is read on both faces rather than one.

Testing and paperwork

Every sling is proof tested on our own 1000 t machine before it leaves Taizhou, and the facilities hold CNAS, Chứng nhận CE và DNV, producing to EN 1492-1, ISO 4878 và JB/T 8521. Each order ships with a test certificate, the blue working load limit label and a packing list; mã HS 630790. Nhãn hiệu riêng, special weave colours and customer packing are available on OEM orders.

Yellow endless sling draped over a rough surface
The extra layer is abrasion reserve: where a single band would wear through the weave in a season, the doubled section has a second layer behind the first.

Thường xuyên hỏi

What is the difference between double ply and duplex?

Nothing — they are the same build: two layers of webbing woven into the one band the loop is made from. This site uses duplex in its specification table and double ply in the product name, and both mean two layers.

Does double ply mean double the capacity?

Not literally. Two layers add substantial capacity at the same width, but the figure is set by the finished band and confirmed by proof test — it is not a doubling of the single-ply number. On the published ladder the practical reading is that duplex is what carries the range above 10 t, and what goes on a narrow band where a wide one will not fit.

Why do 3-ply and 4-ply have no table on this page?

Because the figure depends on the weave, the fibre and the finished width, and we would rather quote a combination that has been proof tested than publish a number that has not. Gửi tải, the hitch and the width, and the ply, độ dày, weight and working load limit come back on the acknowledgement with the certificate.

Is more ply really more cushioning?

Đúng, in the sense that matters on site: more layers mean a thicker, more compliant stack between the load and the load-bearing core of the band, so contact pressure spreads and an edge has more material to work through. That is why 3-ply and 4-ply are specified on precast, machined and coated surfaces rather than on plain structural steel.

Can a double ply sling be choked?

Có - theo chiều dọc, choked and basket all come from the same loop. A stiffer band chokes less tightly than a supple one, so check that the wrap actually beds onto the load; the choked factor of 0.8 applies as it does to any sling.

Will it mark aluminium or painted steel?

Dải là sợi tổng hợp và không có khớp nối chạm vào tải, vì vậy nó sẽ không bị trầy xước hoặc va đập như cách mà dây xích hoặc dây cáp có thể làm. Width and ply are the two protection measures: a wider, thicker band spreads the same load over a larger, softer footprint.

Yêu cầu báo giá

Gửi tải, the hitch and the width you can live with

The load — what it is, its girth at the pick positions, and its surface;

The hitch — vertical, nghẹn ngào hoặc giỏ, and the leg angle if it is a basket;

The width limit — the narrowest band the hook and the load will accept;

The ply you are considering — duplex, 3-lớp hoặc 4 lớp, and why;

The length — by circumference or effective working length;

tiêu chuẩn, destination market and marking, including own-brand labels.

Send the duty and the figure for a quotation →

Đi đâu tiếp theo

 

Công ty giàn nâng nâng · Khu công nghiệp Lifute, Thành phố Thái Châu, Tỉnh Giang Tô, Trung Quốc · Mã HS 630790
Điện thoại +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Để lại tin nhắn của bạn

Cuộn lên trên cùng