Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 टन गोल गोफन.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 प्रति खुट्टा किलोग्राम र 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

बाट निर्माण गर्छौं 1 m देखि 30 m प्रभावकारी लम्बाइ, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the गोल गोफन दायरा. The tier below is the 40 टन गोल गोफन; the tier above is the 60 टन गोल गोफन. For the whole heavy series see heavy duty round slings.

के 50 t figure actually buys you
The number on the sleeve is the working load limit of एउटा खुट्टा, ठाडो झुण्डिएको. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. दुई समायोजनले एकल-खुट्टा फिगरलाई सेट फिगरमा बदल्छ, and both of them move it.
- मोड. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- खुट्टा कोण. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, किनभने वास्तविक भार कहिल्यै पूर्ण रूपमा सममित रूपमा बस्दैन.
| कन्फिगरेसन | कारक | क्षमता |
|---|---|---|
| एउटा गोफन, ठाडो | × 1.0 | 50 t |
| एउटा गोफन, निसासिएको | × 0.8 | 40 t |
| एउटा गोफन, basket at 0–7° | × 2.0 | 100 t on the sling |
| एउटा गोफन, basket at 7–45° | × 1.4 | 70 t on the sling |
| एउटा गोफन, basket at 45–60° | × 1.0 | 50 t |
| दुई गोला, 0-45° ठाडो देखि | × 1.4 | 70 t सेट |
| चार झोला, 0-45° ठाडो देखि | × 2.1 | 105 t सेट |
पछाडिको लोडबाट तालिका पढ्नुहोस्. ए 50 t दुई खुट्टा आवश्यकताहरूमा लोड 50 ०–४५ डिग्रीमा टी स्लिंग (70 t सेट) र 60 t slings once the legs pass 45°. दुई 30 t slings बनाउँदैन 60 t, and two 40 t slings बोक्छ 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
कहाँ 50 t sits against the tiers either side
At this size the sling is rarely the weak link: हुक, हड्डी, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| गोफन | ठाडो, एउटा खुट्टा | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t दुई खुट्टामा, मार्जिन संग |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
एकल 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
The core carries the load, the sleeve decides the life
एक गोल गोफन एक मा दुई लेख हो, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed र ट्विस्ट बिना राखिएको; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: कटौती, स्न्यागहरू, ग्लेजिङ्ग, रासायनिक दाग, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
भारी शुल्क एक निर्माण हो, रेटिंग छैन
The phrase describes the sleeve and the standard of make. ए 50 t sling छ 50 आस्तीन जस्तोसुकै होस्; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the डबल आस्तीन गोल गोफन — on a clean indoor lift it is money spent on nothing.

कडा शरीरलाई कोठा चाहिन्छ
ए 50 t शरीर एक कडा त्रिज्या वरिपरि घुमाउदैन जसरी a 10 t एक गर्छ. काम गर्ने नियमको रूपमा, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a लिफ्टिङ बीम खुट्टा ठाडो नजिक ल्याउन, वा क आँखा संग गोल गोफन made to a measured length.
प्राविधिक मापदण्डहरू
| प्यारामिटर | विशिष्टता |
|---|---|
| उत्पादन | 50 t heavy duty polyester lifting sling, अन्तहीन गोल गोफन, 50,000 किलोग्राम राउन्ड लिफ्टिङ स्लिङ |
| निर्माण | बुनेको ट्युबुलर आस्तीनमा निरन्तर समानान्तर फिलामेन्ट कोर, अनन्त लूपमा बन्द; लोड मार्गमा कुनै धातु छैन |
| कोर | उच्च दृढता पलिएस्टर (PES) मल्टिफिलामेन्ट, समानान्तर राख, waxed |
| आस्तीन | Heavy duty woven high-tenacity polyester, single layer as standard; अर्डर गर्न डबल आस्तीन |
| काम लोड सीमा | 50,000 kg (50 t), एकल खुट्टा, ठाडो |
| ब्रेकिङ लोड | 350,000 एक मा किलोग्राम 7:1 कारक |
| सुरक्षा कारक | 7:1 मानक रूपमा; other factors produced to order where the market requires |
| WLL मा विस्तार | Approximately 2–3 % |
| सेवा तापमान | −40 °C देखि +100 °C |
| प्रभावकारी लम्बाइ | 1–30 m made to order; minimum length applies at this capacity |
| रङ | मानक रूपमा सुन्तला; अर्डर गर्न अन्य आस्तीन रंग |
| चिन्ह लगाउँदै | WLL र लम्बाइ आस्तीनमा छापिएको छ; WLL संग सिलाई लेबल, लम्बाइ, सिरियल, मानक र मिति |
| मानक | IN 1492-2 र ASME B30.9 निर्माण अभ्यास |
| परीक्षण | प्रेषण अघि प्रमाण लोड; सिरियल नम्बरसँग मेल खाएको परीक्षण रेकर्ड |
| प्याकिङ | पाली झोलामा कुण्डल, लेबल गरिएको कार्टन; अनुरोधमा प्यालेट वा क्रेट |
| MOQ & OEM | परीक्षण अर्डरको लागि कम MOQ; लम्बाइमा OEM, आस्तीन रंग, कोर फाइबर, लेबल लेआउट र प्याकिंग |
लम्बाइ: प्रभावकारी लम्बाइ वा परिधि
अन्तहीन गोफनको कुनै अन्त्य हुँदैन, so its length can be quoted two ways and the two are a factor of two apart. यो गोल गोफनमा सबैभन्दा सामान्य अर्डर त्रुटि हो, र मा 50 घटना पछि सच्याउन महँगो छ.
| को रूपमा उद्धृत गरियो | तपाईले प्राप्त गर्नुहुन्छ | लागि प्रयोग गरिन्छ |
|---|---|---|
| प्रभावकारी काम लम्बाइ | आधा परिधि - लोड र ब्याक अपमा हुक गर्नुहोस् | ठाडो र चोक्ड लिफ्टहरू, जहाँ झुण्डिएको उचाइ थाहा छ |
| परिधि | पूर्ण लूप लम्बाइ | टोकरी लिफ्टहरू, जहाँ लोडको परिधिले लम्बाइलाई ड्राइभ गर्छ |
ए 4 m प्रभावकारी लम्बाइ एक हो 8 m लुप. On our slings the figure printed on the sleeve is the effective length, त्यसैले प्रिन्ट र उद्धरण सधैं सहमत छन्. टोकरी लिफ्ट को लागी, भारको घेरा लिनुहोस्, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, जुन सानो गोफन किन्नु जस्तै हो.
चिन्ह लगाउँदै, serial and proof-load traceability
माथि 10 t the colour code stops identifying the sling, त्यसैले मा 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- सिलाइएको लेबलले WLL बोक्छ, लम्बाइ, सिरियल, मानक र निर्माण मिति; सिरियल भनेको भौतिक गोफनलाई यसको कागजी कार्यसँग जोड्ने कुरा हो.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.

जहाँ क 50 t sling earns its place
At this capacity the sling is chosen for what it does होइन do to the load — a wire rope grommet carries the same figure. फरक सम्पर्क हो.
- प्रिकास्ट गर्डर र पुल खण्डहरू. प्रत्येक छेउमा एउटा गोफन, गर्डर उठाएको स्तर; आस्तीनले बनेको अनुहार र च्याम्फरलाई जोगाउँछ.
- Steel coils and plate packs. प्याक अन्तर्गत टोकरी, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- ट्रान्सफर्मर, जेनरेटर र मेसिन बेडहरू. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- जहाज र मोड्युल ब्लकहरू. माथिको बीमको साथ चार-बिन्दु, जहाँ स्लिंग कोण चर हो जसले सेटलाई निर्धारण गर्दछ.


निरीक्षण, care and retirement
प्रत्येक प्रयोग गर्नु अघि निरीक्षण गर्नुहोस्, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: कटौती, स्न्यागहरू, ग्लेजिङ्ग, melts, रासायनिक दाग.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- लेबल र छाप्नुहोस्: if the WLL or the length can no longer be read, sling प्रमाणित गर्न सकिँदैन.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, गर्मी ग्लेजिंग, एउटा कोर जुन कडा वा लम्पी भएको छ, chemical attack or a missing label.
- कुण्डल र भुइँ बाहिर भण्डार गर्नुहोस्, दिनको उज्यालो र गर्मीबाट टाढा, विलायक र वेल्ड स्प्याटर; बन्द झोलामा भिजेको गोफन कहिल्यै नराख्नुहोस्, and never drag one under load.
बारम्बार सोधिने
Can one 50 t sling lift 100 टोकरीमा t?
गोफन पक्षमा, हो - 100 ०–७° मा t. अभ्यासमा हुक, यसको माथिको मास्टर लिङ्क वा बीमको लागि पनि मूल्याङ्कन गर्नुपर्छ 100 t, र यो आकारमा क्रेन सामान्यतया हुँदैन. त्यसैले टोकरी मा 50 t एक पकड निर्णय पहिलो र क्षमता निर्णय दोस्रो हो.
दुई गर 50 t slings लिफ्ट 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, र 50 t once the legs open past 45°. A genuine 100 t दुई खुट्टा आवश्यकताहरूमा लोड 75 t slings, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: कम खिंचाव, राम्रो घर्षण जीवन, -40 देखि +100 °C, lowest cost at this rating. ए UHMWPE कोर is worth it where the sling’s own weight is the problem — long bodies, उच्च छनोट, वा एउटा गोफन जसलाई सिँढी चढ्नु पर्छ.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m वा 8 m?
कुन अधिवेशन भन्न खोजेको हो भन्नुहोस्. ए 4 m प्रभावकारी लम्बाइ एक हो 8 m लुप. For a vertical or choked lift the effective length is the distance from hook to load; टोकरी को लागी, हेडरूममा लोडको परिधि थप्नुहोस् र उद्धृत गर्नुहोस्.
के कागजात गोफन संग आउँछ?
A sewn label carrying the WLL, लम्बाइ र धारावाहिक; त्यो धारावाहिकसँग मेल खाएको प्रमाण-लोड रेकर्ड; अनुरोधमा फाइबर प्रमाणपत्र र ब्याच फिगर. यदि तपाइँको बजारलाई विशिष्ट मानक चिन्ह लगाउनु आवश्यक छ भने अर्डर गर्नु अघि हामीलाई भन्नुहोस्.
Can the sleeve be replaced or repaired?
छैन. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
अनुरोध ए 50 टी गोल गोफन उद्धरण
Send the lift, get a drawing and a price
प्रति खुट्टा लोड, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
प्रभावकारी लम्बाइ वा परिधि, वातावरण, and any sleeve or marking requirement.
लिफ्ट स्लिङ रिगिङ कं, Ltd · Lifute Industrial Park, Taizhou, जियाङसु, चीन · HS कोड 630790 · Tel +86 523 8693 5818 व्हाट्सएप +86 180 6600 2268
सम्बन्धित उत्पादनहरू
- सबै गोल गोले, 1-1000 टन — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T पलिएस्टर राउन्ड स्लिंगहरू — for 40 t loads on two legs;
- 60 टन गोल गोफन — the tier above;
- Heavy duty round sling range - 50 t र माथि, heavier sleeves;
- आँखा संग गोल गोफन — a measured length and two pick-up points;
- फ्ल्याट वेबिङ स्लिंग — the same rating in a thinner profile;
- लिफ्टिङ बीमहरू — to keep multi-leg sets closer to vertical.
