Sokajy vokatra
ny antsamotady manainga tsy misy farany dia tadivavarana mihidy tsy misy fiafarana: mitambatra ho azy ny tarika, so there is nothing to thread, no eye to place and no metal fitting anywhere on the article. That one property is why it is the sling most often chosen for loads that must not be marked — metal pipe and tube, rubber products, hazo, fizarana aluminium sy takelaka, and copper tube among them.
The same loop works in the vertical, basket and choker arrangements, it is bought in flat woven or sleeved round form, and it is made to the width, thickness and length the load needs. Lazao anay ny entana, its diameter or girth, and how it will be picked, and we will confirm the loop that fits it.
Choosing an endless lifting sling by the load, tsy amin'ny taonina
A closed loop is bought from the load outwards. The tonnage decides the band, but the load decides everything else: its section, ny fehikibony, ny fiafarany, and whether the loop will be used doubled around the article or passed through itself. The five loads this range is most often bought for are different in exactly those respects, and the table below is the practical reading of them.
| Ny entana | Why a closed soft loop suits it | What to write on the order |
|---|---|---|
| Metal pipe and tube | Fizarana boribory iray no fonosina fa tsy mihantona: ny entana dia miditra ao amin'ny tadivavarana amin'ny alàlan'ny fampitaovana azy manodidina ny sodina, so there is no eye to be lined up against a machined end and no fitting to bruise a coating. | The outside diameter and girth at each pick position, the spacing of the two positions, and the coating condition. |
| Rubber products and hose | Rubber is easily cut by a narrow edge and easily marked by hardware; a wide woven band spreads the force and presents no metal at all. | The section and its surface, ny masa, and whether a compression mark at the contact is a rejection. |
| Kitapo hazo sy hazo | Sharp arrises nanapaka tarika tery; a wide loop spreads the pressure and carries the pack without printing a line into dressed stock. | Ny lanjan'ny fonosana rehefa mandeha, the girth at the pick positions, and any edge protection required. |
| Fizarana aluminium sy takelaka | The softest load in this table, and the one where a mark is most likely to be a rejection; synthetic fibre is chosen here because it is softer than the load. | Ny famaranana (bary, anodisa na voaloko), ny halavany, ary raha azo ekena ny mariky ny vavolombelona. |
| Copper tube and fittings | Malefaka, expensive and unforgiving of a burr: the absence of any fitting on the article is the whole protection. | The tube diameter and wall, the surface condition, and the girth at each position. |
What having no ends changes on the job
The closed form is not a sling with its ends hidden; lahatsoratra hafa io, ary vokatra azo ampiharina telo no manaraka. There is no end to measure from, so the size the sling was made to exists in the marking and in the order rather than in the article. There is no end to attach to, so the arrangement — vertical, basket or choker — is decided at the load and changes what the loop carries. And there is no end from which an inspection can begin, so on a closed loop the printed figures are the whole record of what the article is, which is why the marking has to be legible rather than merely present.
NY FAHARETANY, and the convention it is quoted in
Tsy misy fiafarana azo refesina ny tadivavarana, and this trade quotes the same article under two conventions — the circumference of the loop, and the length of the band laid flat — which for the same sling differ by about a factor of two. Samy ara-dalàna; iray amin'ireo ihany no tarehimarika tianao holazaina. State the convention with the figure on the enquiry, or state the use instead (for example, the girth of the article the loop must go round), and the ambiguity disappears before the band is cut.
Materials and forms
- Flat woven endless belt — one band closed on itself, the simplest closed article, with a wide face for soft loads.
- Sleeved round sling — a load-bearing core inside a protective cover, which keeps the fibre away from the load and shows the capacity clearly on the sleeve.
- Polyester - mivelatra ambany ary miorim-paka eo ambanin'ny enta-mavesatra tsy tapaka; the general-purpose choice for repetitive handling.
- Nylon — tough and abrasion-resistant, and the one to consider where shock loads are expected.
- UHMWPE sy aramid — for the highest strength to weight, and for high-temperature or flame exposure respectively.
Whatever the fibre, no metal part is fitted to the article: the loop is the whole sling. Where a fitting is unavoidable at the hook end, it belongs to the lifting set rather than to the sling, which keeps the contact with the load entirely soft.
Fanontaniana matetika
Can an endless lifting sling be used in a choker? ENY, ary tsy maintsy ambara ny fandaminana, because what the loop carries changes with it. mijidina, harona sy choker dia adidy telo samy hafa amin'ny lahatsoratra iray ihany.
How do I state the length? With the convention named, or with the use stated instead — the girth of the article the loop goes round. The two conventions differ by about a factor of two.
Will it mark a copper or aluminium surface? The band is synthetic fibre and no fitting touches the load, ka tsy handratra na burr. Ny sakany no fepetra fiarovana: ny midadasika kokoa ny tarika, the lower the pressure on the surface.
Can it be made to my diameter? Yes — width, thickness and length are made to order against the load, and the marking is put on as it is made.
Aiza no haleha manaraka
For the closed forms in this family see antsamotady boribory tsy misy farany SY antsamotady tsy misy farany; for the flat closed belt see circular flat lifting belt; for the one-trip version of the same loop see antsamotady fomba tokana SY antsamotady fanariana boribory; for pipe duty specifically see fanondranana sodina vy antsamotady. Related categories: manainga antsamotady.
Contact
Ny sandan'ny anjara Lift Sling Rigging Co., Ltd - telefaonina sy WeChat 18066002268, mailaka 702461526@qq.com, Lifute Industrial Park, Tanànan'i Taizhou, Faritanin'i Jiangsu, CHINE. HS code 630790. Alefaso ny entana, its girth and the arrangement, and we will confirm the loop before the band is cut.