Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tone Puʻupuʻu Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

We build it from 1 m i ka 30 m effective length, hoʻokahi a ʻelua lima lima, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the maa poepoe laula. The tier below is the 40 tonne poepoe maa; the tier above is the 60 tonne poepoe maa. For the whole heavy series see heavy duty round slings.

He aha ka 50 t figure actually buys you
The number on the sleeve is the working load limit of one leg, e kau pololei ana. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
| Hoʻonohonoho | Kumukumu | Ka hiki |
|---|---|---|
| Hoʻokahi maʻa, kū pololei | × 1.0 | 50 t |
| Hoʻokahi maʻa, ʻoki ʻia | × 0.8 | 40 t |
| Hoʻokahi maʻa, hīnaʻi ma 0–7° | × 2.0 | 100 t on the sling |
| Hoʻokahi maʻa, hīnaʻi ma 7–45° | × 1.4 | 70 t on the sling |
| Hoʻokahi maʻa, hīnaʻi ma 45–60° | × 1.0 | 50 t |
| ʻElua maʻa, 0–45° mai ke alo | × 1.4 | 70 t hoonoho |
| ʻEhā maʻa, 0–45° mai ke alo | × 2.1 | 105 t hoonoho |
Read the table from the load backwards. A 50 t ukana ma na wawae elua e pono ai 50 t maa ma 0–45° (70 t hoonoho) a 60 t slings once the legs pass 45°. ʻelua 30 t hana ole na maa 60 t, and two 40 t maa lawe 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Mahea 50 t sits against the tiers either side
At this size the sling is rarely the weak link: ka makau, ke kaulahao, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| maʻa | Kū pololei, one leg | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t ma na wawae elua, with margin |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
He hookahi 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
The core carries the load, the sleeve decides the life
ʻO ka maʻa poepoe ʻelua ʻatikala i hoʻokahi, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed a hoomoe me ka wili ole; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: ʻokiʻoki, snags, ʻōniʻoniʻo, hoʻopaʻa kemika, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
ʻO ka hana kaumaha he kūkulu, ʻaʻole he helu
The phrase describes the sleeve and the standard of make. A 50 t sling is 50 t ka mea a ka lima; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the maʻa lima pōʻai pālua — on a clean indoor lift it is money spent on nothing.

Pono ke kino ʻoʻoleʻa i kahi lumi
A 50 ʻAʻole piʻo ke kino i kahi radius paʻa i ke ala a 10 t kekahi. E like me ke kānāwai hana, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Pane pinepine ʻia ka geometry paʻa me ke kino lōʻihi, a lāʻau hāpai e hoʻokokoke i nā wāwae i ke kū pololei, a i ʻole a maa poepoe me na maka hana ʻia i ana lōʻihi.
Nā palena ʻenehana
| ʻĀpana | Hōʻike |
|---|---|
| Huahana | 50 t heavy duty polyester lifting sling, maa poepoe pau ole, 50,000 kg maʻa hāpai poepoe |
| Kūkulu | ʻO ke kumu filament like mau i loko o ka lima tubular i ulana ʻia, pani ʻia i loko o kahi pōʻai pau ʻole; ʻaʻohe metala ma ke ala hoʻouka |
| Core | Ka polyester kiʻekiʻe (PES) multifilament, kau like, waxed |
| lima lima | Ua ulana ʻia ka polyester kiʻekiʻe, papa hoʻokahi e like me ke kūlana; lima lima pālua e kauoha |
| palena haawe hana | 50,000 kg (50 t), wāwae hoʻokahi, kū pololei |
| Haʻihaʻi ukana | 350,000 kg ma a 7:1 mea kumu |
| Mea palekana | 7:1 e like me ke kūlana; nā kumu ʻē aʻe i hana ʻia e kauoha i kahi e koi ai ka mākeke |
| Elongation ma WLL | Approximately 2–3 % |
| Wela lawelawe | −40 °C i +100 °C |
| lōʻihi kūpono | 1–30 m made to order; pili ka lōʻihi liʻiliʻi ma kēia hiki |
| kalakala | ʻAlani ma ke ʻano maʻamau; nā kala lima ʻē aʻe e kauoha |
| Hoailona | WLL a me ka lōʻihi i paʻi ʻia ma ka lima; lepili humuhumu me WLL, lōʻihi, serial, maʻamau a me ka lā |
| Kūlana | IN 1492-2 a me ASME B30.9 hana hana |
| Hoʻāʻo | Hoʻouka ʻia ka hōʻike ma mua o ka hoʻouna ʻana; moʻolelo hoʻāʻo i kūlike me ka helu serial |
| Hoʻopili | Coil i loko o kahi ʻeke poli, kākeka hōʻailona; pallet a pahu paha ma ke noi |
| MOQ & OEM | MOQ haʻahaʻa no kahi kauoha hoʻokolokolo; OEM ma ka lōʻihi, kala lima, fiber kumu, hoʻonohonoho lepili a me ka hoʻopili ʻana |
Ka lōʻihi: effective length or circumference
ʻAʻohe hopena o ka maʻa pau ʻole, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, a ma 50 t it is an expensive one to correct after the event.
| Haʻi ʻia e like me | Loaʻa iā ʻoe | Hoʻohana ʻia no |
|---|---|---|
| Ka lōʻihi hana kūpono | Half the circumference — hook down to the load and back up | Hoʻokiʻekiʻe kū pololei a kuʻi, kahi i ʻike ʻia ai ke kiʻekiʻe e kau ana |
| Kapuni | ʻO ka lōʻihi o ka loop loop | Hāpai ʻākeʻe, kahi e holo ai ke apo o ka ukana i ka loa |
A 4 m lōʻihi kūpono he an 8 m loop. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. No ka hāpai hinai, e lawe i ke apo o ka ukana, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, ua like ia me ke kuai ana i ka maa liilii.
Hoailona, serial and proof-load traceability
Maluna 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- A sewn label carries the WLL, lōʻihi, serial, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.

Kahi a 50 t sling earns its place
At this capacity the sling is chosen for what it does ʻaʻole do to the load — a wire rope grommet carries the same figure. The difference is contact.
- ʻO nā kāʻei precast a me nā ʻāpana alahaka. Hoʻokahi maʻa ma kēlā me kēia welau, kaʻe i hoʻokiʻekiʻe ʻia; pale ka lima i ka maka i hana ʻia a me ka chamfer.
- Steel coils and plate packs. Hīnaʻi ma lalo o ka ʻeke, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Nā mea hoʻololi, nā mīkini hana a me nā moena mīkini. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Moku a me nā poloka module. ʻEhā kiko me ke kukui ma luna, kahi o ka huina maa ka hoololi e hooholo i ka hoonohonoho.


Nānā, care and retirement
E nānā ma mua o kēlā me kēia hoʻohana, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: ʻokiʻoki, snags, ʻōniʻoniʻo, melts, hoʻopaʻa kemika.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Lepili a paʻi: if the WLL or the length can no longer be read, ʻaʻole hiki ke hōʻoia i ka maʻa.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, ʻōniʻoniʻo wela, a core that has gone stiff or lumpy, chemical attack or a missing label.
- Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.
Nīnau pinepine ʻia
Can one 50 t sling lift 100 t i ka hinai?
Ma ka ʻaoʻao maʻa, ʻAe - 100 t ma 0–7°. Ma ka hana ka makau, pono e helu ʻia ka loulou master a i ʻole ke kukui ma luna 100 t, a ma kēia nui ʻaʻole maʻamau ka crane. ʻO ia ke kumu o ka hīnaʻi ma 50 t he hoʻoholo paʻa mua a ʻo ka hoʻoholo hiki ke lua.
Do two 50 t hāpai maʻa 100 t?
Not at an angle. ʻElua mau wāwae ma 0–45° mai ka lawe ʻana i ke kūpaʻa 70 t, a 50 t once the legs open past 45°. A genuine 100 t ukana ma na wawae elua e pono ai 75 t maa, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: haʻahaʻa haʻahaʻa, ola abrasion maikaʻi, −40 a hiki i +100 °C, lowest cost at this rating. A UHMWPE kumu is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
He aha ka lōʻihi o kaʻu kauoha - 4 m a i ʻole 8 m?
E haʻi i ka ʻaha kūkā āu e ʻōlelo nei. A 4 m lōʻihi kūpono he an 8 m loop. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, e hoʻohui i ke kāʻei o ka ukana i ke poʻo a haʻi i kēlā.
He aha nā palapala e hele mai me ka maʻa?
A sewn label carrying the WLL, ka lōʻihi a me ka serial; he moʻolelo hoʻouka hōʻoia i pili i kēlā serial; he palapala fiber a me nā helu pūʻulu ma ke noi. Tell us before the order if your market needs a specific standard marking.
Can the sleeve be replaced or repaired?
ʻAʻole. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Noi a 50 t poepoe maa quotation
Send the lift, get a drawing and a price
Hoʻouka i kēlā me kēia wāwae, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Effective length or circumference, ke kaiapuni, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, ʻO Jiangsu, Kina · HS code 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Nā huahana pili
- Na maa poepoe a pau, 1–1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T polyester poepoe maa — for 40 t loads on two legs;
- 60 tonne poepoe maa — the tier above;
- Heavy duty round sling range — 50 t a maluna, heavier sleeves;
- maa poepoe me na maka — a measured length and two pick-up points;
- sling webbing flat — the same rating in a thinner profile;
- Kaola hāpai — to keep multi-leg sets closer to vertical.
