Nā Māhele Huahana

Upena Hapai ukana

Wehewehe pōkole:

ʻO ka hui lift sling ligging company e hana i ka ʻupena ukana kaula nylon, ʻupena ukana kaula kaula kila a me ka ʻupena ukana ʻupena kiʻekiʻe

ʻUpena hāpai ukana ma ke kaula nylon, polyester webbing and steel wire rope, 1-100 t. Mesh, ka nui a me nā kiko hāpai i kāu kaha kiʻi, tested per net.

Huahana Huahana

ʻO ka hui lift sling ligging company e hana i ka ʻupena ukana kaula nylon, ʻupena ukana kaula kaula kila a me ka ʻupena ukana ʻupena kiʻekiʻe.

 

Upena Hapai ukana

Cargo lifting net loaded with rough stone blocks, lifted on four orange corner straps from a crane hook
Kiʻi 1 – A cargo lifting net in service: the load sits inside the mesh and the four corner straps take the whole consignment from the crane hook.

A cargo lifting net turns a loose, stacked or bagged consignment into a single crane lift. The net closes around the whole load instead of choking individual pieces, and it carries that load from its corners rather than from one contact point, so cargo that cannot be repacked, banded or palletised can still be moved in one movement.

We manufacture cargo lifting nets in three woven constructions – high-tenacity nylon rope, galvanised steel wire rope and high-strength polyester webbing – across a rated capacity of 1 t i ka 100 t. Wehe maka, nui ʻupena, palena palena, lifting points and colour are made to your drawing, and every net is proof-load tested in our own plant before it is packed.

  • Hiki ke koho ʻia: 1 t – 100 t, stated for the way the net is rigged
  • Wehe maka: 50 mm – 400 mm, chosen from the smallest dimension of the cargo
  • Nā wahi hāpai: 4 reinforced corners as standard, 8 points for a spreader beam
  • Mea palekana: 5:1 / 6:1 / 7:1 depending on construction
  • Palapala: capacity label, material test report and CE marking
  • Nā kūlana: built to your nominated standard; ISO 9001 quality system

Which cargo lifting net suits your load?

ʻO nā hale kūkulu ʻekolu i ʻāwili i ka hiki, so the choice is normally decided by the cargo and the working environment rather than by tonnage alone. Use the table below as a starting point, then confirm the mesh, the net size and the lifting points with our engineers.

Papakaukau 1 – Construction by cargo type (guide)
Cargo Recommended construction Usual mesh Kaha maʻamau
Bagged goods – fertiliser, palaoa, seed, hānai Polyester webbing or nylon rope 100 mm 2 t – 10 t
Palletised cartons, boxed goods High-strength upena lawe ukana 100 x 100 mm 2 t – 10 t
Piliki, poloka, pohaku moku Nylon rope net in bag form 100 mm – 150 mm 2 t – 25 t
Quarry run, hōʻuluʻulu, ʻōpala wāwahi Steel wire rope net 150 mm – 300 mm 10 t – 100 t
Nā lāʻau lāʻau, lāʻau ʻoki ʻia, nā pou Nylon rope net, wili ʻia 200 mm – 300 mm 2 t – 50 t
Steel plate packs, paipu paipu, pauku Webbing net with edge protection, or wire rope net 100 mm – 200 mm 5 t – 50 t
Pahu, nā kaʻa, nā wili Nylon rope net or webbing net 100 mm – 200 mm 1 t – 10 t
Machined, painted or plated parts Webbing net only – palahalaha, non-marking bands 50 mm – 100 mm 1 t – 20 t
Scrap metal, mixed abrasive bulk Steel wire rope net 200 mm – 400 mm 10 t – 100 t
FIBC big bags, 1 t a me 2 t ʻUpena pūnaewele, or a purpose-made ʻupena ukana ʻupena pallet 50 mm – 100 mm 1 t – 5 t

What a cargo lifting net is – a me ka mea ole

ʻO ka ʻupena hāpai ukana he lattice i ulana ʻia, ʻaʻole ʻeke a ʻaʻole maʻa. ʻO nā kaula a i ʻole nā ​​kaula e hele i nā kihi ʻākau e hana i ka ʻupena hāmama; the border and the corners carry the load; and the cargo sits inside the lattice rather than on top of it. That geometry is what makes a net useful: the load is distributed over a wide bearing face instead of being concentrated at a hook, a choke point or a fork pocket, so contact pressure drops and the surface of the cargo is left intact.

It differs from a sling in three practical ways. A net holds the cargo in three dimensions, so nothing can slide out sideways during the lift. A net can be loaded on the ground, spread flat, and only then closed around the goods, which means the goods never have to be lifted to be netted. And a net is rated as an assembly of corners, border and mesh, so its capacity is quoted for a stated rigging arrangement rather than as a single line pull.

Diagram of the three cargo lifting net constructions: knotted nylon rope, kaula uwea kila i ulana kea me na ferrules kaomi, and flat polyester webbing
Kiʻi 2 – Schematic of the three woven constructions: kaula nylon wili ʻia (8-24 mm), cross-woven steel wire rope locked with pressed ferrules, and flat polyester webbing woven into a square mesh.

The four elements that set the rating

The strand or the band. kaula nylon, steel wire rope or flat webbing. This single choice sets the strength, the net weight, the surface contact and the resistance to abrasion, cut and heat.

The mesh opening. The size of the square or diamond aperture. Hoʻoholo ia i ka mea e noho ai i loko o ka ʻupena a me ke kaumaha o ka ʻupena. It is chosen from the smallest dimension of the cargo, ʻaʻole loa mai ka nui o waho o ka ʻupena – a 6 m net with a 300 mm mesh will lose bricks through the mesh no matter how strong the rope is.

ʻO ka palena. A doubled or reinforced edge running the full perimeter, no laila ʻaʻole hiki i nā kaula lihi ke wehe, spread apart or pull out under load. On a webbing net the border is double-layer stitched; on a rope net it is a doubled border rope spliced into the corners.

The lifting points. Four reinforced corner loops as standard, a i ʻole ʻewalu mau kiko kahi i hāpai ʻia ai ka ʻupena mai kahi lāʻau hoʻolaha. Load must enter the corners and the border, never the middle of a panel. Loading the middle of a net is the most common way a sound net is destroyed in service.

Mesh opening of a knotted nylon cargo lifting net being measured with a vernier caliper
Kiʻi 3 – Mesh opening measured with a caliper on a knotted rope net – the aperture, not the net size, decides what the cargo net will hold.

Cargo lifting net technical parameters

The table below puts the three constructions side by side. Values are our standard production range; anything outside it is built to drawing, and the rating that applies is the rating of the net as it is rigged, not the capacity of the crane above it.

Papakaukau 2 – Cargo lifting net specifications, all three constructions
ʻĀpana Nylon rope net Steel wire rope net ʻUpena pūnaewele
Mea waiwai 100% kiʻekiʻe-tenacity nylon (polyamide) multifilament Ke kaula uwea hao hao; kuhiliʻole 304 / 316 ma ke noi 100% kiʻekiʻe-tenacity polyester webbing; nylon or PP on request
Strand / hui 8 – 24 mm kaula, 3-strand i kau ʻia a i ʻole 8 / 12-kaula wili (a hiki i 32 mm ma ke noi) 6 x 19 for abrasion, 6 x 37 / 6 x 36WS for flexibility; 6 – 20 mm; FC or IWRC 50 mm webbing standard; 25 / 75 / 100 mm ma ke noi
Wehe maka 100 – 300 mm, huinaha a daimana paha 150 – 400 mm, huinaha 100 x 100 mm huinahalike maʻamau; 50 – 300 mm ma ke noi
Huihui / lock Netmaker’s knot, or knotless braided splice Pressed aluminium ferrule at every intersection Woven band crossings, stitched at the border
Palena ʻO ke kaula palena ʻelua, spliced into the corners Ke kaula palena mau, ferrule-paʻa i ka mesh Double-layer stitched border round the full perimeter
Nā wahi hāpai 4 maka kihi; 8-kiko ma ke noi ʻO nā maka kihi i kaomi ʻia me nā thimble, or rings / nā loulou haku 4 reinforced corner loops; 8-mea kiko a me ke apo ma ke noi
Hiki ke koho ʻia 1 t – 50 t 2 t – 100 t 2 t – 10 t kūlana; heavier to order
Mea palekana 5:1 / 6:1 / 7:1 4:1 / 5:1 / 6:1 7:1
ʻO ka lōʻihi kokoke. 18 – 22% i ka hoomaha – absorbs shock load Haahaa loa – the mesh keeps its shape under steady load Haʻahaʻa, kokoke. 7% ma ka palena haawe hana
Abrasion a ʻokiʻoki Maikaʻi loa; a single damaged strand can be replaced locally Kiʻekiʻe loa o nā ʻekolu Maikaʻi loa, akā pono e mālama ʻia mai nā ʻaoʻao ʻoi aku
ʻAiʻino ʻAʻohe pala; suited to wet and salt-water duty Galvanised as standard; stainless for marine and chemical service ʻO ka polyester ʻole ʻole, Ua kūpaʻa ka UV
Hana wela -40 C i +80 C Hot and dirty service – e hōʻoia i ke kuleana me mākou -40 C i +100 C
kalakala Keʻokeʻo, or dyed to order Galvanized / stainless finish Orange high-visibility, polū, ʻeleʻele, ʻōmaʻomaʻo a maʻamau
Palapala hōʻoia CE, GS, ISO 9001; test report per net CE, ISO 9001; CNAS and DNV certified facility CE, GS, ISO 9001; test report per net

Net size and rated capacity

Standard sizes are listed below. Moe kaʻa, ipu, hold and spreader dimensions are made to drawing, and the capacity quoted is the capacity of the finished net, tested before dispatch.

Papakaukau 3 – Standard cargo lifting net sizes
Upena nui (L x W) Kaha maʻamau Hoʻohana maʻamau
2.0 x 2.0 m 1 t – 3 t Pahu, ʻāpana mīkini, nā mea liʻiliʻi
2.5 x 2.5 m 2 t – 5 t Palletised a ʻeke ukana, hoʻouka ipu
2.5 x 6.0 m 4 t – 10 t ukana lōʻihi, paipu paipu, kaʻa kaʻa a me ke kaʻa hoʻouka ʻana
4 x 4 ft (1.2 x 1.2 m) 2 t – 3 t Nā ukana liʻiliʻi, pahu pahu, ʻāpana mīkini (makeke aupuni)
82 x 82 i loko 2 t – 5 t Ka wāwae pallet maʻamau i nā mākeke imperial
6.0 x 6.0 m 10 t – 25 t ʻeke ʻeke nui, lāʻau, ʻōpala
8.0 x 8.0 m 25 t – 50 t Puke kaumaha, pōhaku, hana eli a me ka wawahi
Hana ʻia i ke kaha kiʻi 1 t – 100 t Moe kaʻa, ipu, paʻa a me ka mea hoʻolaha kaola

Wehe maka: choose it from the smallest dimension of the cargo

Mesh is the parameter buyers most often get wrong, because it is chosen from the net size instead of from the load. The rule we apply is simple: the aperture must be smaller than the smallest dimension of the smallest piece that must not escape. The table below is the guide we use on quotation.

Papakaukau 4 – Mesh opening against cargo size (guide, confirmed on quotation)
Smallest cargo dimension Cargo example Mesh to specify
Ma lalo 50 mm Bottles, small castings, nuts and bolts, components in bulk 50 mm – closed or near-closed bag form
50 – 100 mm Piliki, bagged fertiliser, boxed goods, FIBC big bags 100 mm
100 – 200 mm Pahu, pahu pahu, pohaku moku, lāʻau ʻoki ʻia 150 – 200 mm
Pau 200 mm Palaka, lāʻau lāʻau, ʻōpala, ʻōpala wāwahi 250 – 300 mm, a i ʻole 400 mm in wire rope

Lifting configuration and how the rating is stated

A cargo lifting net is rated as an assembly. The same net gives a different rating for a four-point vertical lift, a two-point lift and an eight-point lift from a spreader beam, because the number of load-bearing corners changes. Every net we supply is therefore labelled with its working load limit and, where a net is used in more than one arrangement, each arrangement is listed separately on the label. Quote the configuration you will actually use when you enquire – a rating copied from a catalogue without the configuration is not a rating.

Nylon rope cargo lifting net

A ʻupena hāpai ukana nylon is knotted or braided from high-tenacity nylon rope. Each strand can move slightly inside its knot, so the net settles around an irregular stack instead of sitting on top of it, a ʻo ka elongation kiʻekiʻe o ka nylon e hoʻopaʻa i ka haʻalulu i ka wā e lawe ai ka crane i ka lohi. It is the usual choice for timber and logs, pōhaku, pahu pahu, nā kaʻa, scrap and any load whose shape shifts as it is lifted.

Rope is also the most repairable construction: a damaged strand can be re-knotted or re-spliced locally and the net re-inspected, which matters on a site where a net is working daily. For polypropylene rope in the same construction, ike i ka polypropylene rope cargo net sling.

Knotted nylon rope cargo lifting net laid flat with square mesh and corner ropes
Kiʻi 4 – A knotted rope cargo lifting net laid flat: kaʻa huinaha, doubled border and four corner ropes spliced into the perimeter.

Steel wire rope cargo lifting net

A steel wire rope cargo lifting net is cross-woven from galvanised wire rope and locked at every intersection with a pressed aluminium ferrule, so the mesh cannot open up or distort when the net is dragged across a quay or a truck bed. Wire rope is the construction for abrasion, ʻoi ʻoi, hot surfaces and long service with little maintenance – quarry run, hōʻuluʻulu, ʻōpala wāwahi, scrap and heavy bulk.

It is the heaviest of the three and the least forgiving to finished surfaces, so it is normally specified where the cargo is rough. Where a wire rope net has to handle dressed material, we supply the same construction with sheathed contact sections, using the rope from our maa kaula uwea laula.

Rope cargo lifting net spread on the floor while stacked coils are loaded onto it before the lift
Kiʻi 5 – Loading a net on the ground before the lift: the cargo is stacked inside the mesh, so nothing has to be lifted twice.

High-strength webbing cargo lifting net

A high-strength webbing cargo lifting net is woven from flat polyester webbing. Ke hele nei nā ʻāpana ma nā kihi ʻākau e hana i kahi ʻāhaʻi hāmama, the border and corners take the load, a palupalu ka ʻupena holoʻokoʻa a hiki i ka ʻeke, pahu, i pena ʻia a i ʻole ka ukana i hana ʻia me ka māka ʻole. Lawe ʻo ia i ke alo haʻahaʻa loa o nā kūkulu ʻekolu ma ke kaumaha ʻupena haʻahaʻa, which is why it is the default for palletised, bagged and unitised cargo in ports, on trucks and on site cranes.

He haʻahaʻa ka lōʻihi o ka polyester, so the mesh keeps its shape while the crane takes up the slack and the load stays square. Ua ulana ʻia ka webbing i loko o kā mākou wili ponoʻī, which is why band width, kala kala, mesh and capacity can be tuned to the load instead of bought in from a catalogue. It is the same webbing used in our maʻa pūnaewele a maa poepoe pau ole, so a net and a sling on the same lift are matched in elongation and colour coding.

Orange polyester webbing cargo lifting net with 100 mm huinaha huinahalike i waiho palahalaha
Kiʻi 6 – 50 mm nā kaula polyester ʻalani i ulana ʻia i loko o ka a 100 x 100 mm huinahalike, with a double-layer stitched border round the perimeter.
Corner detail of a webbing cargo lifting net showing stitched border and steel corner ring
Kiʻi 7 – kikoʻī kihi: the stitched border, the reinforced corner and the ring that forms the lifting point. This is where a net wears first, and where inspection should start.

Pehea ka ʻupena hāpai ukana

  • Four-point lift from a single hook. Hoʻopili ʻia nā puka puka ʻehā ma luna o ka makau a i ʻole ke apo haku, so the net closes around the cargo as the crane takes up. This is the standard arrangement for bagged, palletised and unitised loads.
  • Eight-point lift from a spreader beam. Kūlike ka ʻupena a paʻa ka ukana, ʻo ia ka mea e pono ai ka lawe lōʻihi a ākea paha. ʻO kā mākou hāpai i ka lāʻau lapaʻau takes the eight points and keeps the legs vertical.
  • Bag form. A closed three-dimensional net for loose goods that must not escape – nā pōhaku lepo, pohaku moku, bottles, small castings.
  • Flat net, cargo inside the mesh. For palletised, bundled or unitised loads that only have to be held together during the transfer.

ʻO kēlā me kēia hoʻonohonoho, load must go into the corners and the border. Three habits destroy nets faster than any cargo: loading the middle of a panel, ka huki ʻana i ka ʻupena ma ka ʻaoʻao me ka crane, and lifting on fewer than the full set of lifting points.

ʻO ka mea e pono ai mākou e ʻōlelo i kahi ʻupena hāpai ukana

Papakaukau 5 – Information required for an accurate quotation
ʻIkepili No ke aha ia mea
Hoʻouka i ke kaumaha a me ke ʻano hoʻouka Hoʻonohonoho i ka mana helu a me ka helu o nā kaula lawe ukana a i ʻole nā ​​kaula ma lalo o ka ukana
Upena lōʻihi x laula Pono e ʻoi aku ka nui o ka ʻupena ma mua o ke kapuaʻi ukana no laila e noho ka ukana i loko o ka mesh, ʻaʻole ma luna
Wehe maka 100 x 100 mm is our webbing standard; smaller or loose items need a smaller aperture
Strand diameter or band width Sets strength and net weight; band width also sets the bearing face on the cargo
Nā wahi hāpai Four corners as standard, or eight points and rings for a spreader beam
Crane, makau a mea hoolaha paha Determines whether the corners carry eyes, nā apo, shackles or thimbles
Kaiapuni UV, wai paʻakai, ʻO ke dute ma waho a i ʻole ka wela wela ke hoʻoholo i ka mea a me ka mālama ʻana
Palapala hōʻailona CE, test report, declaration of conformity or own-brand labels

Nānā: what to check and when to retire a net

Inspect before every lift and record a formal inspection at the interval your site requires. Check the corner loops and the corner stitching first – that is where wear starts – then work round the border and the mesh.

Papakaukau 6 – Inspection points and retirement criteria
Check Retire the net if
Corner loops and corner stitching Stitching is broken, the loop is deformed, or the ring / thimble is cracked or worn
Palena The border rope or border band is cut, unravelled or pulled out of the mesh
Strands or bands Any load-bearing strand or band is cut, deeply abraded, heat-glazed or chemically stained
Knots and ferrules A knot has slipped, or a ferrule is cracked, displaced or corroded through
Uwelewele Bands are cut, powdered by UV, or contaminated with oil, paint or chemicals that cannot be removed
Labels The capacity label is missing or illegible – an unlabelled net cannot be rated

Never repair a net by knotting a broken strand, welding a wire rope or heating a band. Repairs belong to the maker or to a competent person using the original materials, followed by a re-test where the standard requires it. Store nets clean, dry and off the ground, mai ka lā pololei.

Where cargo lifting nets are used

Papakaukau 7 – Applications by sector
Sector What the net does
Nā awa a me nā pani ʻO ka pahu pahu a me ka hoʻopau ʻana, palletised and bagged cargo, quay and hold work with a net that is soft, rust-free and easy to fold
Steel and fabrication Plate packs, pūʻolo, machined parts and stillage loads where the surface must not be marked
Pōhaku, quarry and aggregates Split stone, poloka, cobbles and abrasive bulk; wire rope where cut resistance decides the service life
ʻO ka lāʻau a me nā mea ulu lāʻau Nā lāʻau lāʻau, sawn packs and poles – a rope net settles around an irregular stack as it is lifted
ʻO waho a me ka moana Deck and over-the-side transfer; nylon and polyester drain freely and do not rust
Mahiʻai a me nā ʻeke nui Mea hoʻomomona, palaoa, hua a hānai i loko o nā ʻeke a me nā ʻeke nui, lifted whole without repacking
Ka hana hou ʻana a me ka ʻōpala ʻO ka ʻōpala hui ʻia a me ka abrasive, kahi i ʻoi aku ai ka lōʻihi o ka ʻupena kaula
Vehicle and plant loading RoRo and breakbulk loading, where a wide net spreads the load across the body and chassis; ike i ko makou upena hāpai kaʻa laula

Two neighbouring ranges are often quoted with a lifting net: heavy duty truck cargo nets a container cargo nets for securing rather than lifting, a ʻupena kaula palekana where the net protects people instead of holding cargo. Tell us which duty applies and we will confirm the construction – a securing net is not rated for lifting, and a lifting net is not a fall-arrest product.

Nīnau pinepine

What is the difference between a cargo lifting net and a cargo net?

A cargo net is a general term that covers lashing, securing and climbing nets as well as lifting nets. A cargo lifting net is a rated assembly: it is designed for a stated working load limit, tested, labelled and supplied with documentation. If a net has no capacity label, treat it as a securing net and never lift with it.

How do I choose between nylon rope, wire rope and webbing?

ʻOʻohe, wela a abrasive nui helu i ke kaula uwea kila. Cargo that must not be marked points to webbing. Irregular loads that have to settle into the net, a me ka hana papa pulu, kuhikuhi i ke kaula nylon. Where two of those apply at once, tell us and we will recommend the construction with the trade-off made explicit.

What safety factor should I specify?

Our standard ranges are 5:1, 6:1 a 7:1 for rope and webbing nets and 4:1 i 6:1 for wire rope nets. The factor must satisfy the standard your site works to, so confirm it at enquiry rather than assuming the lowest option is acceptable.

Can a cargo lifting net be made to my size and mesh?

ʻAe. Nui, makaʻu, strand diameter or band width, helu o nā wahi hāpai, ʻO ke kala a me ka hiki ke hana ʻia e kauoha, me kahi moe kaʻa, ipu, paʻa a hoʻolaha ana. Send a drawing or the internal dimensions of the space the net has to work in.

Will the net hold loose material such as bricks or split stone?

ʻAe, in bag form with the correct mesh. The aperture must be smaller than the smallest piece, and the net must be closed on all sides. Where material is very fine or very sharp, we will normally propose a smaller mesh in a heavier construction.

Can the net be used in a marine or offshore environment?

ʻAe. Polyester and nylon nets are UV stabilised and rust-free, Hiki ke hoʻolako ʻia nā ʻupena kaula uea i ka galvanized a i ʻole ke kila kila, a kahe wale ia mau mea ekolu ma ka papa. For offshore duty, tell us the salt-spray exposure and the inspection regime so the material and coating are matched to it.

Is a test certificate supplied with each net?

ʻAe. Each net leaves the plant with a capacity label and a material test report, a paʻa kā mākou hale i ka CNAS, CE a me ISO 9001 palapala hōʻoia. Lepili inoa pono'ī, printed markings and declarations of conformity are available on OEM orders.

He aha ka helu kauoha liʻiliʻi?

There is no fixed minimum for standard constructions – a single net for a trial is possible, and batch quantities can combine mixed sizes and mixed constructions in one order. Mixed pallets are also acceptable where the export packing allows it.

How is a cargo lifting net packed for export?

Folded and strapped with the label and test report attached, a laila hoʻopili ʻia ka ʻeke a i ʻole ka pahu e like me ka ʻaelike. Export packing is built to survive sea freight, and nets can be supplied with a repair kit and a spare corner loop where the customer maintains its own fleet.

Can you print our logo or brand on the net?

ʻAe. We weave and print webbing in house, so brand names, capacity text, fleet numbers and colour coding can be incorporated in the net rather than added as a tag. Send the artwork with the enquiry.

Why buy cargo lifting nets from Lift Sling Rigging Company

  • 40 nā makahiki o ka hana ʻana i nā lako hana – founded in 1985 ma Taizhou, ʻO Jiangsu, me ka oi aku 200 employees and one of China’s largest sling and net production bases.
  • We weave our own webbing and make our own rope nets – laula hui, kala kala, Aia ka mesh a me ka mana ma lalo o kā mākou mana, so a net is tuned to the load instead of being bought in from a catalogue.
  • Keena ho'āʻo ponoʻī a me a 1000 t mīkini ho'āʻo pae – breaking load is tested per net and documented; the facility holds CNAS, CE and DNV certification and 15 palapala ʻae ʻia.
  • Hoʻokahi mea hoʻolako no ka pae ukana holoʻokoʻa – upena lawe ukana, maʻa pūnaewele, poepoe maa, maa kaula uwea, spreader beams, kaula nylon, uwea huki socks and safety nets.
  • OEM a me ODM – lepili inoa ponoi, paiʻia pūnaewele, nā waihoʻoluʻu maʻamau a me ka hoʻopili ʻana i waho no nā mea hoʻolaha a me nā mea hoʻohana hope.
Lift Sling Rigging Company factory entrance in Taizhou, ʻO Jiangsu, where cargo lifting nets are woven and tested
Kiʻi 8 – Nets are woven, humuhumu, ferrule-pressed and tested in the same plant, which is why a quoted net and a delivered net match.

Noi i ka ʻupena hāpai ukana

Send the load weight and shape, ka nui o ka upena, ka wehe ʻana o ka maka, the lifting points and the environment – or a drawing of the truck bed, ʻo ka pahu a paʻa paha ka ʻupena e kūpono. E hōʻoia kā mākou mau ʻenekinia i ke kūkulu ʻana, ka mana helu, the strand or band size and the packing, and quote in one reply. E kamaʻilio mua, e hoʻokaʻaʻike i kā mākou mau ʻenekinia; kā mākou certification and test records loaʻa ma ke noi.

Hui Lift Sling Rigging
Pāka ʻOihana Lifute, Kulanakauhale o Taizhou, ʻĀpana ʻo Jiangsu, Kina
Tel: +86 523 8693 5818 | WhatsApp: +86 180 6600 2268 | leka uila: lift98@jslift.com
HS code: 630790

Waiho i kāu leka

Holo i luna