Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 吨圆形吊带.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 每条腿公斤数和 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

我们从构建它 1 米至 30 米有效长度, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, 所以文件夹中的证书属于板条箱中的吊带. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the 圆形吊带 范围. The tier below is the 40 吨圆形吊带; the tier above is the 60 吨圆形吊带. For the whole heavy series see heavy duty round slings.

什么是 50 t figure actually buys you
The number on the sleeve is the working load limit of 一条腿, 垂直悬挂. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. 两次调整,将单腿身材变成定型身材, and both of them move it.
- 模式. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- 腿部角度. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, 因为真正的负载永远不会完全对称.
| 配置 | 因素 | 容量 |
|---|---|---|
| 一根吊带, 垂直的 | × 1.0 | 50 t |
| 一根吊带, 窒息 | × 0.8 | 40 t |
| 一根吊带, 0–7° 的篮子 | × 2.0 | 100 t on the sling |
| 一根吊带, 篮子角度为 7–45° | × 1.4 | 70 t on the sling |
| 一根吊带, 篮子角度为 45–60° | × 1.0 | 50 t |
| 两个吊带, 0与垂直方向 –45° | × 1.4 | 70 设定 |
| 四吊带, 0与垂直方向 –45° | × 2.1 | 105 设定 |
从负载向后读取表. 一个 50 需要两条腿承受负载 50 t 吊索在 0–45° (70 设定) 和 60 t slings once the legs pass 45°. 二 30 t 吊带不会使 60 t, and two 40 t吊带携带 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
在哪里 50 t sits against the tiers either side
At this size the sling is rarely the weak link: 钩子, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| 吊带 | 垂直的, 一条腿 | Two legs at 0–45° | 选择的时间 |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t 两条腿, with margin |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
单个 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
核心承载负载, 袖子决定寿命
圆形吊带是两件合二为一的吊带, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, 打蜡并铺设无扭曲; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: 削减, 障碍, 玻璃窗, 化学染色, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
重型是构建, 不是评级
The phrase describes the sleeve and the standard of make. 一个 50 t 吊带是 50 无论什么袖子; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the 双袖圆形吊带 — on a clean indoor lift it is money spent on nothing.

僵硬的身体需要空间
一个 50 身体不会像a那样围绕一个紧密的半径弯曲 10 没有人这样做. 作为工作规则, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. 紧凑的几何形状通常需要更长的机身来解决, 一个 吊梁 让腿更接近垂直, 或一个 带眼圆形吊带 制成测量长度.
技术参数
| 范围 | 规格 |
|---|---|
| 产品 | 50 t heavy duty polyester lifting sling, 无尽圆形吊带, 50,000 公斤圆形起重吊带 |
| 建造 | 编织管状套筒中的连续平行丝芯, 陷入无限循环; 负载路径中没有金属 |
| 核 | 高强力聚酯纤维 (聚醚醚酮) 复丝, 平行铺设, 打蜡的 |
| 袖子 | 重型机织高强度聚酯纤维, 标准单层; 双袖可订购 |
| 工作负荷极限 | 50,000 公斤 (50 t), 单腿, 垂直的 |
| 断裂载荷 | 350,000 公斤在 7:1 因素 |
| 安全系数 | 7:1 作为标准; 市场需要时按订单生产的其他因素 |
| WLL 伸长率 | 大约2-3 % |
| 使用温度 | −40°C 至 +100 ℃ |
| 有效长度 | 1–30 m made to order; 在此容量下适用最小长度 |
| 颜色 | 橙色为标准; 其他袖子颜色可订购 |
| 标记 | 袖子上印有 WLL 和长度; 带 WLL 的缝制标签, 长度, 连续剧, 标准和日期 |
| 标准 | 在 1492-2 和 ASME B30.9 施工实践 |
| 测试 | 发货前已加载证明; 测试记录与序列号匹配 |
| 包装 | 塑料袋中的线圈, 贴有标签的纸箱; 根据要求提供托盘或板条箱 |
| 起订量 & 代加工 | 试订单起订量低; OEM 长度, 袖子颜色, 芯纤维, 标签布局和包装 |
长度: 有效长度或周长
无尽的吊索没有末端, so its length can be quoted two ways and the two are a factor of two apart. 这是圆形吊带上最常见的订购错误, 并在 50 事后纠正成本高昂.
| 引用为 | 您收到 | 用于 |
|---|---|---|
| 有效工作长度 | 圆周的一半 — 向下钩住负载并向上挂起 | 垂直和阻塞电梯, 已知悬挂高度 |
| 圆周 | 全环长度 | 吊篮式升降机, 负载的周长驱动长度 |
一个 4 m 有效长度是 8 米循环. On our slings the figure printed on the sleeve is the effective length, 所以印刷品和报价总是一致的. 用于篮式升降机, 获取负载的周长, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, 这与购买较小的吊带相同.
标记, serial and proof-load traceability
多于 10 t the colour code stops identifying the sling, 所以在 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- 缝制标签带有 WLL, 长度, 连续剧, 标准和生产日期; 序列号将物理吊带与其文书工作联系起来.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- 可根据要求提供纤维证书和批次数据; if your market needs a specific standard marking, say so before the order rather than after.

其中一个 50 t sling earns its place
At this capacity the sling is chosen for what it does 不是 do to the load — a wire rope grommet carries the same figure. 区别在于接触.
- 预制梁和桥段. 两端各有一根吊索, 梁提升水平; 套筒保护成形面和倒角.
- Steel coils and plate packs. 包装下的篮子, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- 变形金刚, 发电机和机床. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, 所以整个方法就是将软环穿过孔.
- 船舶和模块块. 四点上方有横梁, 其中吊索角度是决定设置的变量.


检查, 护理和退休
每次使用前检查, 并按照您的政权要求的时间间隔正式. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: 削减, 障碍, 玻璃窗, melts, 化学染色.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- 标签和打印: 如果无法再读取 WLL 或长度, 吊带无法验证.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, 热玻璃, 核心变硬或结块, chemical attack or a missing label.
- 盘绕存放并远离地板, 远离日光并远离热源, 溶剂和焊接飞溅物; 切勿将湿的吊带存放在封闭的袋子中, and never drag one under load.
常见问题
Can one 50 t型吊索举升机 100 t 在篮子里?
在吊带一侧, 是的 - 100 t 0–7°. 在实践中,钩子, 主连杆或上方的横梁也必须进行评级 100 t, 在这种尺寸下,起重机通常不会. 这就是为什么篮子在 50 t 首先是抓地力决定,其次是容量决定.
做两个 50 t型吊带提升机 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, 和 50 t once the legs open past 45°. A genuine 100 需要两条腿承受负载 75 t吊带, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
聚酯为通用芯: 低弹力, 良好的磨损寿命, −40 至 +100 ℃, lowest cost at this rating. 一个 超高分子量聚乙烯芯材 is worth it where the sling’s own weight is the problem — long bodies, 高选秀权, 或必须携带上梯子的吊索.
What about hot loads?
A standard polyester core is rated to +100 ℃. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 米或 8 米?
说出您指的是哪个约定. 一个 4 m 有效长度是 8 米循环. For a vertical or choked lift the effective length is the distance from hook to load; 对于一个篮子, 将负载的周长添加到净空高度并引用.
吊带附带哪些文档?
A sewn label carrying the WLL, 长度和序列号; 与该序列匹配的校样记录; 可根据要求提供纤维证书和批次数据. 如果您的市场需要特定的标准标记,请在订购前告诉我们.
Can the sleeve be replaced or repaired?
不. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
请求一个 50 t圆形吊带报价
Send the lift, get a drawing and a price
每条腿的负载, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
有效长度或周长, 环境, and any sleeve or marking requirement.
起重吊索索具公司, 有限公司·利夫特工业园, 台州, 江苏, 中国·HS编码 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
相关产品
- 全圆形吊带, 1–1000 吨 — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T 涤纶圆形吊带 — for 40 t loads on two legs;
- 60 吨圆形吊带 — the tier above;
- Heavy duty round sling range — 50 t及以上, heavier sleeves;
- 带眼圆形吊带 — a measured length and two pick-up points;
- 扁平吊装带 — the same rating in a thinner profile;
- 吊梁 — to keep multi-leg sets closer to vertical.
