產品類別

5 Ton Heavy Duty Ratchet Straps

簡短描述:

升降吊帶索具公司生產 5 Ton Heavy Duty Ratchet Straps,10 噸棘輪帶,5-Ton Heavy Duty Ratchet Tie Down Strap,5.000daN Lashing strap,5000kg Truck ratchet strap,5 Tonne Ratchet Strap with Chassis Rave Hook,5000kg Ratchet Strap Claw Hook,5000kg Ratchet Strap D Ring,5000kg Ratchet Strap Flat Snap Hook,Ratchet Strap Looped Ends,Ratchet Strap S Hooks.

5 ton heavy duty ratchet straps: 50 毫米聚酯, 5,000 同埋斷, LC 2,500 daN to EN 12195-2. 唔鏽鋼 304/316 and aramid high-temp builds. 工廠直接.

產品詳情

升降吊帶索具公司生產 5 Ton Heavy Duty Ratchet Straps,10 噸棘輪帶,5-Ton Heavy Duty Ratchet Tie Down Strap,5.000daN Lashing strap,5000kg Truck ratchet strap,5 Tonne Ratchet Strap with Chassis Rave Hook,5000kg Ratchet Strap Claw Hook,5000kg Ratchet Strap D Ring,5000kg Ratchet Strap Flat Snap Hook,Ratchet Strap Looped Ends,Ratchet Strap S Hooks.

Cargo restraint · EN 12195-2

5 Ton Heavy Duty Ratchet Straps

50 毫米聚酯織帶, a forged ratchet and 2,500 daN of lashing capacity — plus a stainless build for salt and an aramid build for heat.

2,500 同 捆綁能力 5,000 同 破碎強度 350 同 STF at 50 daN hand 3–10米 standard length
5 ton heavy duty ratchet straps with hook options: claw hook, 平勾, D ring and S hook

“5 ton heavy duty ratchet straps” is the phrase buyers search for, and the reason this page exists is that the phrase covers two different articles. 喺一個 50 mm polyester assembly the breaking strength is 5,000 同 同埋個 捆綁能力 (LC) 係 2,500 同. Both numbers are real, both are printed on the same label, and quoting one against the other is how trailers get overloaded. We build the assembly to EN 12195-2, mark it, and state both figures so the comparison you make at quotation stage is between like and like.

The standard build is 50 mm high-tenacity polyester webbing, a forged ratchet tensioner with a 300 mm handle, and the end fitting your anchor point needs — chassis rave hook, claw hook, D ring, flat snap hook, S hook, sewn loop or no fitting at all. Lengths run 3 去 10 m 作為標準, LC 2,500 同, STF 350 同埋 N 喺 50 同埋手力. Two special builds sit alongside it for the jobs polyester cannot take: a stainless ratchet on the same webbing for salt and wash-down duty, and para-aramid webbing for steel that is still hot.

Part of the 繩索吊帶 and lashing range. 個 50 mm specification in isolation sits on the 50 毫米 5000 公斤棘輪綁帶 頁.

What “5 Ton” Actually Means on a Ratchet Strap

Three figures appear on a lashing strap and only one of them describes what the strap is allowed to do in service. 喺 EN 下 12195-2 綁帶嘅織帶必須至少達到綁帶容量嘅兩倍, which is where the familiar 2:1 relationship comes from — and where the confusion starts, because “5,000 kg” is the failure figure, not the working figure.

枱 1 — The three numbers on a 5 ton heavy duty ratchet strap
數字 Value on the 50 mm assembly 佢所描述嘅嘢 How it gets misread
最低斷裂強度 5,000 同 (5,000 公斤) 喺拉力測試中組件失效嘅負荷 Read as the working figure — the mistake that overloads a trailer
綁帶能力 (LC) 2,500 同 (2.5 t) 組件額定可以保持嘅拘束力, printed on the label 同升降吊帶嘅 WLL 比較, which is a different duty altogether
標準張力 (STF) 350 同埋 N 喺 50 同埋手力 The tension one person reaches with the ratchet handle 同 LC 好混亂, 所以個操作員會一直繞過有用嘅點
Ask for both numbers. Two suppliers quoting “5 tonne” can be quoting the breaking strength and the working figure — a factor of two apart — and a North American catalogue printing the same article as “10,000 lb” is quoting breaking strength in pounds. 同一條皮帶, different unit, same trap.

點解呢個 50 mm Build Is the Heavy-Duty Default

Width is a compromise between strength, handling and what the anchor will accept. Narrow bands are cheap but concentrate the load and run out of capacity above a van; the widest belts carry twice as much and are twice as awkward to throw over a load bed. 個 50 mm sits where the strength covers a flatbed, a container or a plant trailer while the band can still be handled in gloves.

枱 2 — Width ladder: where 50 mm sits
網頁寬度 Typical LC 破壞力量 佢買嚟做乜嘢
25 毫米 (1 喺) 400–500 daN 800–1,000 daN Tool boxes, light restraint, tight anchor eyes
35 毫米 (1-3/8 喺) 750 同 1,500 同 Van and trailer decks, general cargo
38 毫米 (1-1/2 喺) 1,000–1,500 daN 2,000–3,000 daN 鋼板, 管束, plant
50 毫米 (2 喺) 2,500 同 5,000 同 Heavy cargo restraint, 線圈, 機械, 容器
75–100毫米 5,000 daN and up 10,000 daN and up Abnormal loads, where the bed allows the width

The hardware matters as much as the band. The ratchet is forged steel with a case-hardened pawl and gear, and the handle is dimensioned so the standard tension force is reached inside the 250 N manual limit of EN 12195-2 — no extension bars and no cheater pipes, which is how handles get bent and operators get hurt.

Standard Specification of the 5 Ton Assembly

枱 3 — 50 毫米 5 ton heavy duty ratchet strap: 技術參數
項目 規格
網布 100% 高韌性聚酯, 斜紋織法, 紫外線穩定咗, 50 毫米 ± 2%
帶厚度 / 大量 1.8 毫米名義上 / 88 g per metre
綁帶能力 (LC) 2,500 同埋每個組裝
最低斷裂強度 5,000 同 (2:1 against LC)
標準張力 (STF) 350 同埋 N 喺 50 同埋手力
張力器 Forged steel ratchet, black electrophoretic coating, case-hardened pawl, 300 mm handle
喺 LC 嘅伸長率 7% 或者更少
服務溫度 −40 °C 至 +100 °C (聚酯織帶)
標準長度 3–10米; 1–30 m to order
標記緊 Woven label: LC, STF, 長度, 批號, standard reference
標準 Designed, tested and marked to EN 12195-2
HS 代碼 630790

The End Fitting Decides Whether the Strap Fits the Job

The webbing is the easy half. The fitting has to reach the anchor the vehicle actually has, seat on the crown of the eye rather than the point of another hook, and stay seated when the load shifts.

枱 4 — End fittings for 5 ton heavy duty ratchet straps
配件 Anchors to Notes before ordering
Chassis rave hook Flatbed side rail, chassis lip Check rail thickness and that the hook throat clears it
Claw hook Anchor rings, D rings, recessed eyes Opening must clear the ring; load on the crown only
D ring / 三角洲環 Welded or bolted anchor points Ring bore at least as wide as the webbing
Flat snap hook 電子軌道, slotted rail, 窿 Confirm slot width; snap gate must close fully
S hook 管道, 軌道, frame members Both ends must seat without point loading on a weld
Sewn loop / looped ends Around the load or through a bore Nothing metal at the load; ideal for finished surfaces
無窮無盡, 冇啱身 Girth only — hulls, 線圈, 捆綁 See the endless loop build below
5 ton heavy duty ratchet straps with hook options: claw hook, 平勾, D ring and S hook
一 50 毫米波段, eight ways to terminate it — the hook option decides which anchor the strap can reach.

個 5 Ton Strap in Two Special Builds

Polyester covers most freight, and it fails predictably when it is out of its depth: 佢周圍軟化 150 °C and melts at about 255 °C, and it corrodes nothing but is let down by plated hardware in salt. The two builds below exist for exactly those two failure modes, and they are ordered by customers who have already had the failure once.

Stainless steel ratchet tie downs — for salt, wash-down and finished surfaces

The stainless build keeps the same 50 mm polyester webbing and replaces the hardware with AISI 304 或者 316: ratchet frame, rivets, spring and, where an anchor exists, stainless wire hooks. LC runs from 400 同埋 N 喺 25 毫米到 2,500 同埋 N 喺 50 毫米, still at 2:1 against webbing break. Most orders are the endless form, where the strap closes on itself through the ratchet and the buckle is the only metal part in the whole assembly — and it sits outside the loop, so a hull, a mast section or a coil sees webbing only.

The grade decision is about chloride, 唔載入. 304 (1.4301) handles rain, 淡水, condensation and indoor wash-down; 316 (1.4401/1.4404) adds molybdenum for salt spray, marina air, de-icing salt and food plants. Both are annealed to a comparable strength, so paying for 316 喺相信佢更強嘅情況下,就係為錯誤嘅財產付出代價. 如果個應用程式同安全有關, 喺磨坊證書上面確認等級,而唔係喺發票描述上面.

Two shop-floor notes worth passing on. 唔鏽鋼絲膽, so a dry 316 螺母用力跑上 a 316 stud can seize — the ratchet is assembled lubricated and should be re-lubricated rather than forced with a bar. 而唔鏽鋼係鹽水入面用螺栓固定喺鋁上面,形成一對電流, so where the strap anchors to an alloy frame, 隔離個聯絡人.

Full range and grade comparison: endless stainless steel ratchet strap.

阿拉米德 (凱夫拉) ratchet straps — for heat, sparks and cut edges

Para-aramid webbing behaves differently from polyester at temperature. It has no practical melting point: at about 427 °C it chars and carbonises instead of melting and dripping, its limiting oxygen index is 28 or above so it self-extinguishes once the ignition source is removed, and it holds 200 °C continuously with short-term peaks to 400 °C. On a steel coil that is still warm from the mill, a polyester strap of the same width would already have lost its tension; the aramid band is still doing its job.

The second property is mechanical. Para-aramid has roughly three times the tenacity of polyester at equal thickness, with the cut and abrasion resistance that coil edges, slab corners, galvanised strip and scaffolding demand, and a denser weave so damage stays local instead of unravelling across the width. Elongation at break is only 2.4–3.5%, which is what a static restraint wants — the strap does not creep, and it does not need re-tensioning when the load cools.

Two honest limits. Aramid is flame retardant, not fireproof: molten steel, ladles and hot slag still need a heat shield or a stand-off. And low elongation is exactly wrong for snatch and shock loads — for those, the polyester band or a dedicated recovery strap is the right article.

Widths 25–50 mm, LC 500–2,500 daN, standard lengths 1–10 m: aramid flame retardant ratchet straps.

How Many Straps Does the Load Actually Need?

Lashing capacity is not the same thing as restraint delivered. A strap tensioned at an angle gives a horizontal component that is smaller than its LC, and the angle is the operator’s choice, not the supplier’s. At 45° a strap delivers roughly 0.7 of its lashing capacity; bring the legs closer to vertical and the figure rises towards the full LC, lay them flatter and it falls away.

枱 5 — Worked example: 50 mm straps at 2,500 daN LC
Straps used Angle to the deck Restraint per strap Total restraint
2 45° 大約. 1,750 同 大約. 3,500 同
4 30° 大約. 1,250 同 大約. 5,000 同
4 45° 大約. 1,750 同 大約. 7,000 同
4 60° 大約. 2,165 同 大約. 8,660 同
6 45° 大約. 1,750 同 大約. 10,500 同

The arithmetic is an illustration, not a lashing plan: 喺 12195-2 also brings friction between load and deck into the calculation, and a low-friction load on a steel bed needs anti-slip matting before extra straps. Send us the cargo weight, the deck, the anchor points and the route, and we will state the number of straps and the angle rather than leave it to the yard.

喺邊度 5 Ton Ratchet Strap Earns Its Keep

  • 平床, container and plant trailer restraint — the volume application for the 50 mm build.
  • 鋼線圈, 板, billet and pipe bundles, with edge protection at the contact points.
  • 機械, moulds and skid-mounted plant, 喺邊度 a 25 mm strap has neither the width nor the tension.
  • 木材包, 箱子同靜物, including the endless form that simply closes round the pack.
  • Vehicle transport and recovery decks, holding cars and plant to the bed rather than to a hook.
  • 海軍, marina and wash-down duty in 304 或者 316 where plated hardware would be a maintenance item.
  • Steel mills, foundries and glass plants in aramid, where polyester would melt before the shift ended.
5 ton heavy duty ratchet straps securing a timber crate on a flatbed truck
50 mm straps over a timber crate on a flatbed — two legs at roughly 45°, hooks seated on the crown of the rail.

顏色, Printing and Private Label

Band colour is a customer choice rather than a rating, which is why the same 50 mm assembly ships in blue, 橙, 黃色, 黑色, 紅色, olive or a matched shade. Brand, LC and a batch number can be printed directly on the webbing so the strap is identifiable after years in a warehouse, and the sewn label carries LC, STF, 長度, standard and traceability code. Cartons of 10 去 20 幾塊, palletised for export, with neutral or own-brand packaging as required.

測試緊, Traceability and the Paperwork Buyers Ask For

Every production batch is sampled for breaking strength at the 2:1 ratio the standard requires, and each assembly carries a batch number that traces back to the webbing roll and the hardware lot. 測試報告, material declarations, mill certificates for stainless grades and lashing capacity calculations are available for tender packages and safety audits.

One point worth being blunt about: any claim of EN 12195-2 conformity, CE marking or a third-party test mark has to match the documents actually held for that product and that factory. We state the standard the assembly is built and tested to, and we send the report with the shipment, because a claim that cannot be produced costs more than the order it wins.

常見問題

係一個 5 ton ratchet strap rated to lift 5 噸?

唔得, and it is not rated to lift at all. A lashing strap carries a lashing capacity — 2,500 daN on the 50 mm build — for restraint in transit. Lifting needs a sling with the correct safety factor and its own marking. A strap bought for restraint and used as a sling is the most common and most serious misuse in this category.

Why does the same strap get called 5 噸同埋 2.5 噸?

Because two different figures are being quoted. 5,000 daN is the minimum breaking strength; 2,500 daN is the lashing capacity the assembly is rated to hold, at the 2:1 ratio EN 12195-2 requires. Always ask which figure a quotation is against.

50 毫米或者 38 mm for a flatbed?

50 毫米, unless the anchor points are small. 個 38 mm is a genuine 1,000–1,500 daN strap and suits plate and pipe; 個 50 mm gives 2,500 daN with a longer handle and a heavier ratchet, and it is the size most flatbed and container work ends up with.

Do I need 304 或者 316 唔鏽鋼?

316 where chloride is present — sea air, 鹽噴霧, 除冰鹽, boatyards, food plants. 304 is enough for rain, 淡水, condensation and indoor wash-down. The difference is corrosion resistance, 唔係力量.

At what temperature does polyester fail, and what does aramid do instead?

Polyester softens around 150 °C and melts at about 255 °C, and it drips burning polymer as it goes. Para-aramid holds 200 °C continuously, takes short peaks to 400 °C, and chars at about 427 °C instead of melting. 上面 400 °C, or against molten metal, both need a heat shield.

Can the strap be supplied with a printed brand and a custom length?

係. 寬度, 長度到 30 米, band colour, webbing print, label layout and packaging are all made to order, and the rating applies to the finished assembly rather than to the roll of webbing.

要求報價

Five lines are enough for an accurate price and an accurate rating: the cargo weight and shape, the deck and anchor points, 環境 (salt, 熱, 洗落去), the length and the end fitting. We reply with the assembly, the LC and STF figures, the standard it is built to and the lead time.

升降吊索索具公司

升降工業園, 泰州市, 江蘇省, 中國

電話: +86 523 8693 5818 · WhatsApp: +86 180 6600 2268

電郵: 702461526@qq.com · HS code 630790

Send your lifting details for a quotation →

相關產品

升降吊索索具公司 · Lifute Industrial Park, 泰州市, 江蘇省, 中國 · HS 代碼 630790
電話 +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · 升降机98 @ jslift . com · xulft.com

 

留低你嘅訊息

捲動去頂部