Lift sling rigging company produce Flame Retardant Aramid Ratchet Straps,Fire Rescue Ratchet Strap,Fireproof Ratchet Strap,Kevlar Yellow Para-Aramid Drag Ratchet Strap Webbing,Flame resistant cargo strap,Flame Resistant Aramid Strap,Aramid High-Temperature Resistant Binding Strap,Fire Retardant Webbing,Heat Resistant Straps,Aramid Flame Retardant Ratchet Straps,kevlar Cargo Lashing Ratchet Belt.
Aramid Flame Retardant Ratchet Straps
Kevlar Lashing Straps for Steel Mills, Foundries and Fire Rescue: Chokoj ooxolil, Flame and Cut Resistant



séeba'an núukik
Aramid flame retardant ratchet straps are 25-50 mm lashing straps woven from 100% para-aramid yarn and fitted with a forged steel ratchet tensioner. They hold a lashing capacity of 500 ti' 2500 yéetel N at 200 C continuously and 400 C for short periods, char instead of melting, and resist the cutting and abrasion that destroys polyester straps on steel edges.
Why Aramid Webbing for Heat, Flame and Cut Exposure
- Continuous service temperature of 200 C, short-term peaks to 400 C, char point 427 C, with no melting and no burning droplets.
- Inherently flame retardant, LOI at or above 28: the webbing self-extinguishes as soon as the heat source is removed and does not propagate flame along the strap.
- No burning droplets to ignite packaging, cab interiors or the cargo itself, which is the failure mode that makes melting straps dangerous beyond the load loss.
- Thermal shrinkage close to 0 percent at 150 C, so the strap does not slacken as the hot load cools down and no re-tensioning is needed after the shift.
- Resists welding sparks, grinding dust and hot slag; specified for steel coil and slab transport, fundiciones, fundición ti' troquel, glass tempering furnaces and fire rescue.
Because para-aramid is an inherently flame retardant fibre and not a coated or dipped fabric, the protection does not wash out, rub off or expire. There is no FR finish to degrade. That is the practical difference between a strap that is fire retardant on the day it leaves the factory and one that is still fire retardant at the end of its service life, which is what a safety audit actually asks you to prove.
Cut and Abrasion Resistance
Para-aramid has a tenacity of roughly 23 g/denier with very high resistance to cutting and abrasion, typically several times that of polyester at equal thickness. On sharp steel plate, coil edges, galvanised strip and scaffolding, the webbing resists the sawing action that wears ordinary straps through at the edge. The weave is denser, so damage stays local instead of unravelling across the full width.
- Abrasion resistance against steel coil edges, slab corners, concrete and rusty frames.
- Cuts and nicks do not propagate: damaged yarns stay trapped in the weave rather than opening a tear line.
- Low elongation at break of about 2.4 ti' 3.5 percent means the strap does not creep under static restraint, so it needs re-tensioning less often.
- Resistant to most solvents, oils and greases, and does not support mildew in damp storage.
Aramid is not a drop-in replacement for every polyester strap. Its low elongation is exactly what you want for static restraint of hot, heavy loads, but it absorbs less shock energy. For dynamic or snub loads, pair the hot-work restraint with eslingas u correas u poliéster that have the elongation to match. Yóok'ol 400 C, at molten steel, ladles and hot slag, the strap still needs a heat shield or a stand-off: no webbing, aramid included, survives direct contact with molten metal.
Ratchet Tensioner and Hardware
The tensioner is a forged steel ratchet with a black electrophoretic coating, rated to the lashing capacity of the webbing rather than to a generic handle size. Pawl and gear are case hardened, and the handle is dimensioned so the standard tension force is reached within the 250 N manual force limit of EN 12195-2, with no extension bars and no cheater pipes on site.
- Xul accesorios: flat hook for flatbed side rails, claw hook and J hook for anchor rings, E-track for van interiors, or endless webbing with no fittings at all.
- Every strap carries a label with lashing capacity (LC), muuk' tensión estándar (STF), chowakil, manufacturer and the standard it is made to, so the strap can still be identified after years in a warehouse.
Specifications of Aramid Flame Retardant Ratchet Straps
The table below is the selection table buyers actually use: choose the width by lashing capacity and anchor point, then confirm the temperature at the contact point. Values are typical for standard production and can be customised.
| Web width | Buka'aj u ba'al u k'axnak' (LC) | Min. muuk' u jaatik | STF | u kóochil le correa | Ka'anatako'ob típica |
|---|---|---|---|---|---|
| 25 mm (1 ichil) | 500 Yéetel | 1,000 Yéetel | 75 Yéetel | 1.6 mm | Light restraint, tool boxes, tight anchor eyes |
| 35 mm (1-3/8 ichil) | 1,000 Yéetel | 2,000 Yéetel | 150 Yéetel | 2.0 mm | kuuch general, van and trailer decks |
| 38 mm (1-1/2 ichil) | 1,500 Yéetel | 3,000 Yéetel | 200 Yéetel | 2.2 mm | Placa de acero, paquetes tuberías, hot work areas |
| 50 mm (2 ichil) | 2,500 Yéetel | 5,000 Yéetel | 350 Yéetel | 2.5 mm | Bobinas de acero, slabs, heavy machinery |
| Jaatsil | Especificación |
|---|---|
| Xooko'obo' u correa | 100% para-aramid yarn; no added FR finish to wash out or expire |
| Boon | Natural aramid yellow (other colours on request) |
| Tejer | Densified twill / plain weave with reinforced edges |
| Continuous service temperature | 200 C |
| Short-term peak temperature | 400 C |
| Char / decomposition point | 427 C; chars without melting or dripping |
| Limiting oxygen index (LOI) | 28 wa yóok'ol; ku tu'upul tu juunal |
| Elongación ti' le rotura | 2.4 ti' 3.5 percent |
| Thermal shrinkage | Óol 0 percent at 150 C |
| Tensor | Forged steel ratchet, black electrophoretic coating, case-hardened pawl |
| Xul accesorios | Gancho táats' che', claw hook, J hook, E-track, wa mina'an u xuul |
| Longitud estándar | 1 ti' 10 m; custom lengths to 30 m |
| Marcado | LC, STF, chowakil, batch number and standard reference on label |
| Referencia estándar | ICHIL 12195-2 for design, testing and labelling |
| Embalaje | 10 ti' 20 pieces per carton, palletised for export |
How to Choose the Right Size for Your Load
- Calculate lashing capacity, not cargo weight. LC must cover the restraint force at the actual lashing angle; a single strap at 45 degrees gives roughly 0.7 times its LC of effective restraint. For round coils use two straps and keep a 2:1 margin.
- Match width to the anchor point. 25 mm yéetel 35 mm suit light restraint and tight anchor eyes; 38 mm yéetel 50 mm are the working sizes for steel coils, slabs, pipe bundles and truck decks.
- Check the temperature at the contact point, not the workshop temperature. 200 C continuous is the design point; anything above 400 C needs a heat shield between strap and load.
- Choose the fitting as carefully as the webbing: flat hook for side rails, claw or J hook for rings, E-track for van walls, endless where the strap passes through a bore.
- Set the length. Standard lengths run 1 ti' 10 m, asab k'iin u k'áatik; an over-long strap wastes tension travel and chafes on the deck, a short one cannot reach the anchor.
For a steel coil that is both lifted and lashed, run the restraint over the crown with edge protectors and use a eslinga wóolis wa steel wire rope sling as the primary sling. The aramid strap then does the restraining job, at the temperature the lifting sling is not rated for.
Aplicaciones típicas
- Bobina de acero, slab, billet and plate transport, including coils still warm from the mill.
- Fundiciones, die casting and heat treatment shops, where sparks and radiant heat destroy polyester.
- Glass tempering and float lines, ceramics and cement kilns.
- Welding and fabrication bays, shipyards and heavy maintenance.
- Fire and rescue units, for dragging and restraining hot or damaged equipment.
- Aerospace, motorsport and military applications needing heat and cut resistance in a soft strap.
Related products for a completek'axnak' kuuch setup include correas u trinquete in polyester for general freight, yéetel webbing sling manufacturer support for custom widths, colours and printed labels.
Kaambalil yo'osal calidad yéetel ju'uno'ob
Straps are assembled from aramid webbing that is inspected for weave density, width tolerance and broken yarns before the tensioner is fitted. Each production batch is sampled for breaking strength at a 2:1 factor ti' seguridad, and the label carries a batch number so a strap can be traced back to its webbing roll. Informes de prueba, material declarations and lashing capacity calculations are available for tender packages and safety audits.
Certification wording matters. Any claim of CE marking, ICHIL 12195-2 conformity or third-party test marks must match the documents you actually hold, and should only be published when the certificate covers this product and this factory. Buyers increasingly check this, and a claim you cannot produce costs you the order.
k'áat chi'oba' suuk u beeta'al
Are aramid ratchet straps fireproof or only flame retardant?
They are inherently flame retardant, not fireproof. The para-aramid webbing will not melt or drip and stops burning when the heat source is removed, but direct contact with molten metal still requires a heat shield.
What temperature can aramid ratchet straps withstand?
200 C continuously and up to 400 C for short periods. The fibre chars at about 427 C instead of melting. Poliéster, by comparison, softens near 150 C and melts at 255 C.
Do aramid straps stretch like polyester straps?
Ma'. Elongation at break is only about 2.4 ti' 3.5 percent, which is ideal for static restraint of hot loads but absorbs less shock energy than polyester.
Is aramid the same as Kevlar?
Kevlar is a brand name for para-aramid fibre from DuPont. Aramid flame retardant ratchet straps are woven from the same para-aramid fibre family, whichever mill supplied the yarn.
Can these straps be used for lifting instead of lashing?
Ma'. They are lashing and restraint straps. Lifting requires slings rated with the correct safety factor and marked accordingly; use round slings or wire rope slings for the lift and keep the aramid strap for restraint.
What widths and lengths are available?
25 mm, 35 mm, 38 mm yéetel 50 mm widths with lashing capacity from 500 ti' 2500 Yéetel, in standard lengths of 1 ti' 10 m. Longitud personalizada, colours and printed labels are available on request.
Send us the load dimensions, the contact temperature and the anchor type, yéetel yaan k confirmar le anchura, length and fitting, with a datasheet and a sample for trial.
k'áat chi'oba' suuk u beeta'al
See the questions above for fireproof versus flame retardant, temperature limits, stretch behaviour, Kevlar equivalence, lifting versus lashing, and available widths and lengths.
Request a datasheet or a trial sample
Send the load dimensions, the contact temperature and the anchor type. K confirmamos le anchura, length and fitting, and reply with a datasheet and a sample for trial.


