Lift sling rigging company produce Flame Retardant Aramid Ratchet Straps,Fire Rescue Ratchet Strap,Fireproof Ratchet Strap,Kevlar Yellow Para-Aramid Drag Ratchet Strap Webbing,Flame resistant cargo strap,Flame Resistant Aramid Strap,Aramid High-Temperature Resistant Binding Strap,Fire Retardant Webbing,Heat Resistant Straps,Aramid Flame Retardant Ratchet Straps,kevlar Cargo Lashing Ratchet Belt.
Aramid Flame Retardant Ratchet Straps
Kevlar Lashing Straps for Steel Mills, Foundries and Fire Rescue: Nhiệt, Flame and Cut Resistant



Trả lời nhanh
Aramid flame retardant ratchet straps are 25-50 mm lashing straps woven from 100% para-aramid yarn and fitted with a forged steel ratchet tensioner. They hold a lashing capacity of 500 ĐẾN 2500 daN at 200 C continuously and 400 C for short periods, char instead of melting, and resist the cutting and abrasion that destroys polyester straps on steel edges.
Why Aramid Webbing for Heat, Flame and Cut Exposure
- Continuous service temperature of 200 C, short-term peaks to 400 C, char point 427 C, with no melting and no burning droplets.
- Inherently flame retardant, LOI at or above 28: the webbing self-extinguishes as soon as the heat source is removed and does not propagate flame along the strap.
- No burning droplets to ignite packaging, cab interiors or the cargo itself, which is the failure mode that makes melting straps dangerous beyond the load loss.
- Thermal shrinkage close to 0 percent at 150 C, so the strap does not slacken as the hot load cools down and no re-tensioning is needed after the shift.
- Resists welding sparks, grinding dust and hot slag; specified for steel coil and slab transport, xưởng đúc, đúc chết, glass tempering furnaces and fire rescue.
Because para-aramid is an inherently flame retardant fibre and not a coated or dipped fabric, the protection does not wash out, rub off or expire. There is no FR finish to degrade. That is the practical difference between a strap that is fire retardant on the day it leaves the factory and one that is still fire retardant at the end of its service life, which is what a safety audit actually asks you to prove.
Cut and Abrasion Resistance
Para-aramid has a tenacity of roughly 23 g/denier with very high resistance to cutting and abrasion, typically several times that of polyester at equal thickness. On sharp steel plate, cạnh cuộn dây, galvanised strip and scaffolding, the webbing resists the sawing action that wears ordinary straps through at the edge. The weave is denser, so damage stays local instead of unravelling across the full width.
- Abrasion resistance against steel coil edges, slab corners, concrete and rusty frames.
- Cuts and nicks do not propagate: damaged yarns stay trapped in the weave rather than opening a tear line.
- Low elongation at break of about 2.4 ĐẾN 3.5 percent means the strap does not creep under static restraint, so it needs re-tensioning less often.
- Resistant to most solvents, oils and greases, and does not support mildew in damp storage.
Aramid is not a drop-in replacement for every polyester strap. Its low elongation is exactly what you want for static restraint of hot, heavy loads, but it absorbs less shock energy. For dynamic or snub loads, pair the hot-work restraint with dây đai vải polyester that have the elongation to match. Bên trên 400 C, at molten steel, ladles and hot slag, the strap still needs a heat shield or a stand-off: no webbing, aramid included, survives direct contact with molten metal.
Ratchet Tensioner and Hardware
The tensioner is a forged steel ratchet with a black electrophoretic coating, rated to the lashing capacity of the webbing rather than to a generic handle size. Pawl and gear are case hardened, and the handle is dimensioned so the standard tension force is reached within the 250 N manual force limit of EN 12195-2, with no extension bars and no cheater pipes on site.
- Phụ kiện cuối: flat hook for flatbed side rails, claw hook and J hook for anchor rings, E-track for van interiors, or endless webbing with no fittings at all.
- Every strap carries a label with lashing capacity (LC), lực căng tiêu chuẩn (STF), chiều dài, manufacturer and the standard it is made to, so the strap can still be identified after years in a warehouse.
Specifications of Aramid Flame Retardant Ratchet Straps
The table below is the selection table buyers actually use: choose the width by lashing capacity and anchor point, then confirm the temperature at the contact point. Values are typical for standard production and can be customised.
| Chiều rộng web | Công suất buộc (LC) | tối thiểu. sức mạnh phá vỡ | STF | Độ dày vải | Ứng dụng điển hình |
|---|---|---|---|---|---|
| 25 mm (1 TRONG) | 500 Và | 1,000 Và | 75 Và | 1.6 mm | Light restraint, tool boxes, tight anchor eyes |
| 35 mm (1-3/8 TRONG) | 1,000 Và | 2,000 Và | 150 Và | 2.0 mm | Hàng tổng hợp, van and trailer decks |
| 38 mm (1-1/2 TRONG) | 1,500 Và | 3,000 Và | 200 Và | 2.2 mm | Tấm thép, bó ống, hot work areas |
| 50 mm (2 TRONG) | 2,500 Và | 5,000 Và | 350 Và | 2.5 mm | Thép cuộn, slabs, heavy machinery |
| Mục | Đặc điểm kỹ thuật |
|---|---|
| Chất liệu vải | 100% para-aramid yarn; no added FR finish to wash out or expire |
| Màu sắc | Natural aramid yellow (other colours on request) |
| Dệt | Densified twill / plain weave with reinforced edges |
| Nhiệt độ dịch vụ liên tục | 200 C |
| Short-term peak temperature | 400 C |
| Char / điểm phân hủy | 427 C; chars without melting or dripping |
| Giới hạn chỉ số oxy (LỢI) | 28 hoặc cao hơn; tự dập tắt |
| Độ giãn dài khi đứt | 2.4 ĐẾN 3.5 phần trăm |
| Thermal shrinkage | Khoảng 0 percent at 150 C |
| Máy căng | Forged steel ratchet, black electrophoretic coating, case-hardened pawl |
| Phụ kiện cuối | Móc phẳng, claw hook, J hook, Đường ray điện tử, or endless |
| Chiều dài tiêu chuẩn | 1 ĐẾN 10 tôi; custom lengths to 30 tôi |
| Đánh dấu | LC, STF, chiều dài, batch number and standard reference on label |
| Tài liệu tham khảo tiêu chuẩn | TRONG 12195-2 for design, testing and labelling |
| đóng gói | 10 ĐẾN 20 pieces per carton, palletised for export |
How to Choose the Right Size for Your Load
- Calculate lashing capacity, not cargo weight. LC must cover the restraint force at the actual lashing angle; a single strap at 45 degrees gives roughly 0.7 times its LC of effective restraint. For round coils use two straps and keep a 2:1 lề.
- Match width to the anchor point. 25 mm và 35 mm suit light restraint and tight anchor eyes; 38 mm và 50 mm are the working sizes for steel coils, slabs, pipe bundles and truck decks.
- Check the temperature at the contact point, not the workshop temperature. 200 C continuous is the design point; anything above 400 C needs a heat shield between strap and load.
- Choose the fitting as carefully as the webbing: flat hook for side rails, claw or J hook for rings, E-track for van walls, endless where the strap passes through a bore.
- Set the length. Standard lengths run 1 ĐẾN 10 tôi, đặt hàng lâu hơn; an over-long strap wastes tension travel and chafes on the deck, a short one cannot reach the anchor.
For a steel coil that is both lifted and lashed, run the restraint over the crown with edge protectors and use a dây đeo tròn hoặc steel wire rope sling as the primary sling. The aramid strap then does the restraining job, at the temperature the lifting sling is not rated for.
Ứng dụng điển hình
- Thép cuộn, phiến đá, billet and plate transport, including coils still warm from the mill.
- Xưởng đúc, die casting and heat treatment shops, where sparks and radiant heat destroy polyester.
- Glass tempering and float lines, ceramics and cement kilns.
- Khoang hàn và chế tạo, shipyards and heavy maintenance.
- Fire and rescue units, for dragging and restraining hot or damaged equipment.
- Aerospace, motorsport and military applications needing heat and cut resistance in a soft strap.
Related products for a completebuộc hàng hóa setup include dây đai cóc in polyester for general freight, Và webbing sling manufacturer support for custom widths, colours and printed labels.
Kiểm soát chất lượng và tài liệu
Straps are assembled from aramid webbing that is inspected for weave density, width tolerance and broken yarns before the tensioner is fitted. Each production batch is sampled for breaking strength at a 2:1 hệ số an toàn, and the label carries a batch number so a strap can be traced back to its webbing roll. báo cáo thử nghiệm, material declarations and lashing capacity calculations are available for tender packages and safety audits.
Certification wording matters. Any claim of CE marking, TRONG 12195-2 conformity or third-party test marks must match the documents you actually hold, and should only be published when the certificate covers this product and this factory. Buyers increasingly check this, and a claim you cannot produce costs you the order.
Câu hỏi thường gặp
Are aramid ratchet straps fireproof or only flame retardant?
They are inherently flame retardant, not fireproof. The para-aramid webbing will not melt or drip and stops burning when the heat source is removed, but direct contact with molten metal still requires a heat shield.
What temperature can aramid ratchet straps withstand?
200 C continuously and up to 400 C for short periods. The fibre chars at about 427 C instead of melting. Polyester, by comparison, softens near 150 C and melts at 255 C.
Do aramid straps stretch like polyester straps?
KHÔNG. Elongation at break is only about 2.4 ĐẾN 3.5 phần trăm, which is ideal for static restraint of hot loads but absorbs less shock energy than polyester.
Is aramid the same as Kevlar?
Kevlar is a brand name for para-aramid fibre from DuPont. Aramid flame retardant ratchet straps are woven from the same para-aramid fibre family, whichever mill supplied the yarn.
Can these straps be used for lifting instead of lashing?
KHÔNG. They are lashing and restraint straps. Lifting requires slings rated with the correct safety factor and marked accordingly; use round slings or wire rope slings for the lift and keep the aramid strap for restraint.
What widths and lengths are available?
25 mm, 35 mm, 38 mm và 50 mm widths with lashing capacity from 500 ĐẾN 2500 Và, in standard lengths of 1 ĐẾN 10 tôi. Độ dài tùy chỉnh, colours and printed labels are available on request.
Send us the load dimensions, the contact temperature and the anchor type, và chúng tôi sẽ xác nhận chiều rộng, length and fitting, with a datasheet and a sample for trial.
Câu hỏi thường gặp
See the questions above for fireproof versus flame retardant, temperature limits, stretch behaviour, Kevlar equivalence, lifting versus lashing, and available widths and lengths.
Request a datasheet or a trial sample
Send the load dimensions, the contact temperature and the anchor type. Chúng tôi xác nhận chiều rộng, length and fitting, and reply with a datasheet and a sample for trial.


