Danh mục sản phẩm

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

Mô tả ngắn:

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way endless sling, mắt đơn, for steel pipe and tube: 25-300 mm polyester, 1-24 t WLL, choke factor 0.8. WLL và chiều dài được in trên dây đeo.

Chi tiết sản phẩm

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way sling · single eye · steel pipe and tube

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

A closed loop with one eye, mua cho một chuyến đi: the choke grips the pipe by its own tension and the sling ships out with the consignment.

1–24 t WLL range 25–300mm độ rộng băng tần 0.8 choke factor ±2 % length tolerance
one way endless lifting slings single eye carrying a steel pipe under a crane hook

This is the one-way build of the endless sling: the same closed loop that is thrown round a bundle, made in the single-eye form so that the tail can be passed back through the eye and pulled down into a choke. It is bought with the consignment rather than drawn from a lifting store, it grips the pipe by its own tension, and it is cut off at the far end instead of being recovered. Sizes run from 25 mm đến 300 mm mạng lưới, 1 đến 24 t working load limit and 0.5 tôi đến 100 tôi of band, at a factor of 5:1, 6:1 hoặc 7:1.

Trả lời nhanh: a single-eye endless sling is a choker. One eye means the band can be passed round the pipe and back through itself, which is the cheapest way to grip a round, slippery or coated load — and the grip increases with the load instead of depending on friction alone.

What the three words decide

The name carries three separate decisions and they are worth separating, because buyers often use the words interchangeably and then order the wrong article. Một chiều says what happens after the lift. vô tận says the shape of the band. Mắt đơn says how the sling meets the load. Only the third one changes the lift itself.

Bàn 1 — The three words, and what each one actually decides
từ Điều gì nó quyết định What it does not change
Một chiều The sling travels with the load and is not recovered; một lần kiểm tra, đang có vấn đề; bought and counted in quantities The weave, yếu tố, the proof test or the marking — all identical to a returnable sling
vô tận The band is closed into a loop with no free ends, so it can be wrapped round a section and closed on itself Whether the article is reused; endless slings are made in both builds
Mắt đơn A choke. Đuôi đi vòng quanh tải và quay trở lại mắt, and the noose closes as the hook takes up The vertical rating printed on the band — the choke derates it to 0.8

Read together, the phrase describes one article: a closed-loop polyester sling, finished with a single eye, issued for one pipe or tube consignment. Where the consignment is lifted and then re-slung at the far end, the same band is often supplied in the two-eye looped end single use lifting sling form instead, because the receiving site can then hang it without threading a choke.

Why a choke is the right grip for pipe

A pipe is the worst case for a sling that relies on friction: it is round, it rolls, the wall is thin at the contact line and the coating is softer than the steel under it. A choke answers all four problems at once.

  • The grip is generated, not borrowed. The noose closes as the load comes on, so the band tightens round the pipe in proportion to the weight it is carrying; a vertical sling on a bare pipe has only friction and balance holding it.
  • One contact line, chosen by you. The band bears on a single line of the wall. Set that line where the pipe is strongest — behind the end collar, away from a weld seam — and the load is carried where you put it.
  • Không có kim loại nào chạm vào đường ống. There are no hooks, shackles or buckles on the article, so a coated or painted pipe is not scratched at the sling point.
  • The sling stays where it was fitted. On a one-way build the choke is made at loading and left closed, so the receiving site lifts the bundle with the same sling it arrived in, without a rigger and without a plan.
choker eye closing on a bundle of steel tubing in a warehouse
The choke closing on a tube bundle. Một mắt, một cái đuôi, one journey — the sling stays on the load and ships out with it.

The trade-off is length: a choke consumes reach, because the tail has to come back through the eye and lie alongside the standing part. That is why a one-way pipe sling is ordered by the girth of the bundle rather than by the height of the hook, and why the length arithmetic further down this page starts from the circumference.

Đặc điểm kỹ thuật

Four lines on the order decide the price — width, nhân tố, length and marking — because the eye is formed from the same band and adds nothing to the cost but a stitch pattern.

Bàn 2 — Single-eye endless one-way sling, đặc điểm kỹ thuật tiêu chuẩn
tham số Bản dựng tiêu chuẩn Ghi chú
Webbing Flat woven high-tenacity polyester, 25–300 mm rộng 4 mm hoặc 7.5 dải mm; one to three plies at the heavy end
Giới hạn tải làm việc 1 t – 24 t mỗi sling Thẳng đứng, single leg — the figure printed on the band
Yếu tố thiết kế 5:1 / 6:1 / 7:1 The same WLL needs a wider band at 7:1 than at 5:1
Hình thức Closed loop with one formed eye Eye stitched and bar-tacked at the mouth
Chiều dài 0.5 tôi – 100 m of band Quoted as band length; the choke takes up reach
Eye clear length 250 mm tại 1 đến 650 mm tại 15 t Sized to the hook bowl or pin, plus about 10 mm
Màu sắc Để đặt hàng; TRONG 1492-1 code up to 10 t Usually matched to the goods it travels with
Nhiệt độ −40 °C đến +100 °C Polyester; attacked by concentrated acids
Đánh dấu WLL, chiều dài, chất xơ, batch and your reference Printed on the band and repeated on a sewn label
đóng gói cuộn, banded in bales or cartoned Can be packed into the crate or container with the goods
mã HS 630790 Packing list line, not a lifting register entry

The size ladder: WLL, width and factor

The factor is a market decision as much as an engineering one: giống nhau 5 t sling là 125 mm tại 5:1, 250 mm tại 6:1 Và 150 mm tại 7:1 trên một 4 dải mm. Tell us the factor your market expects and the width follows from the ladder below.

Bàn 3 — Width against working load limit (4 dải mm)
WLL Tại 5:1 Tại 6:1 Tại 7:1 Chiều dài tối thiểu
1 t 25 mm 50 mm 30 mm 0.5 tôi
2 t 50 mm 100 mm 60 mm 1.0 tôi
3 t 75 mm 150 mm 90 mm 1.0 tôi
5 t 125 mm 250 mm 150 mm 1.5 tôi
8 t 200 mm 200 mm 240 mm 2.0 tôi
10 t 250 mm 250 mm 300 mm 2.0 tôi

Widths as published on our single use slings ladder; the full range continues in double ply to 24 t. Where a row shows the same width at two factors, that is the current ladder quoted as it stands.

What a choke does to the figure on the band

The number printed on the band is the vertical, đánh giá một chân. A choker costs a fifth of it, and that is not a safety margin — it is the capacity. Decide the arrangement before the tonnage, then buy the sling that carries the load in that arrangement.

Bàn 4 — Capacity by hitch (worked for a 5 t sling)
Sắp xếp Nhân tố Công suất của một 5 t sling
Thẳng đứng, một chân × 1.0 5,000 kg
Choked — the form on this page × 0.8 4,000 kg
Rổ, two parts at 0–45° × 2.0 10,000 kg
Rổ, two parts at 45–60° × 1.4 7,000 kg
Two-leg assembly at 0–45° × 1.4 7,000 kg per pair
Two-leg assembly at 45–60° × 1.0 5,000 kg per pair
Three or four legs at 0–45° × 2.1 10,500 kg set
Three or four legs at 45–60° × 1.5 7,500 kg set

A worked case from a pipe yard: Một 9.6 t bundle of 508 ống mm, lifted on four chokes. Each sling carries 9,600 -> 4 = 2,400 kg, and because the hitch is a choke the rating has to be 2,400 -> 0.8 = 3,000 kg. MỘT 3 t band at the factor your market uses is the answer — not a 2.4 một, which is the figure that comes out if the choke derate is forgotten. On two chokes the same bundle needs 6 t bands.

Chiều dài: from the pipe circumference to the band you order

A choke is ordered by the girth of the load, not by the height of the hook. Measure the bundle — for a single pipe, π × outside diameter; for a square or rectangular pack, twice the width plus twice the height — then add what the choke itself consumes. In quotation we use:

Band length ≈ girth + eye and tail allowance + handling allowance, where the eye and tail allowance is about 0.3 tôi, and the handling allowance is 0.3–0.5 m for the tail to come back through the eye and lie alongside the standing part. Round up to the next half metre. The finished length is confirmed against your drawing before the bands are cut; the tolerance on a sewn article is ±2 %.

Bàn 5 — Girth of common pipe sizes, and the band to start from
Pipe OD Girth (π × OD) Starting band length Typical arrangement
168 mm 0.53 tôi 1.0 – 1.5 tôi Two to four lengths
219 mm 0.69 tôi 1.5 tôi Two to three lengths
273 mm 0.86 tôi 1.5 – 2.0 tôi Two lengths
325 mm 1.02 tôi 2.0 tôi Two lengths
406 mm 1.28 tôi 2.0 – 2.5 tôi Single or paired
508 mm 1.60 tôi 2.5 tôi Single or paired
610 mm 1.92 tôi 2.5 – 3.0 tôi Đơn
762 mm 2.39 tôi 3.0 – 3.5 tôi Đơn

Starting lengths assume a single wrap and a 0.6 m allowance. A bundle wider than one pipe, a double wrap, or a tail that has to be tied off adds to the figure — send the bundle dimensions and the length is quoted against them.

Ví dụ hoạt động: one length of 508 mm pipe, cuộn cảm đơn. Girth 1.60 tôi + 0.6 m = 2.2 tôi, rounded up to a 2.5 ban nhạc m. A pair of the same pipes is measured on the pair, not on the pipe: 1.016 m wide by 0.508 m deep gives 2 × 1.016 + 2 × 0.508 = 3.05 m of girth, Vì thế 3.65 m with the allowance and a 4 ban nhạc m.

Choosing the band for the pipe you have

The wall, the coating and the end finish decide the width more often than the tonnage does, because the failure on pipe work is a cut or a crush at one contact line rather than a break in the middle of the band. The widths below are the starting point we quote from; take one size up where the pipe is coated, painted or has a sheared end.

Bàn 6 — Band width by pipe size and finish
Pipe outside diameter Bare black pipe tráng, painted or lined
Lên đến 200 mm 50 – 75 mm 75 – 100 mm, tay áo ở đường tiếp xúc
200 – 400 mm 75 – 100 mm 100 – 150 mm
400 – 600 mm 100 – 150 mm 150 mm, 7.5 dải mm
Bên trên 600 mm 150 mm, 7.5 dải mm 150 – 200 mm with wear sleeve
Ống và hồ sơ đi kèm 75 – 200 mm 200 mm if the ends are square-cut

Three details are worth settling at the quotation rather than at the quay. MỘT wear sleeve slid over the contact point takes the abrasion that would otherwise go into the load-bearing weave. MỘT mắt tăng cường in a sleeve keeps a steel hook or shackle pin off the stitch line. And on thin-wall tube the choke should sit where the section is supported, not on an unsupported span — a 3 mm wall will oval under a choke that a 10 mm wall would not notice.

white polyester sling with reinforced red eyes for pipe lifting
A reinforced eye in a red sleeve: on pipe work the eye sits against the hook and takes the wear, which is cheaper than buying a size up.

Đánh dấu, packing and the one inspection

A one-way sling is inspected once, đang có vấn đề, and that inspection is the only one it will get. Everything the receiving site needs to know therefore has to be on the article, in a form that survives a sea freight and a forklift.

  • Printed on the band: working load limit and length, at a size a rigger can read from the ground — for example “WLL 3ton 2.5m”.
  • Sewn label at the eye: the same figures plus the fibre, the batch, the design factor and the standard; CE marking where the 7:1 series is supplied for a market that requires it, and type-test reports for other factors.
  • Your reference: order, bundle or project number printed at the same time as the WLL — printed into the band, not applied as a sticker that lifts in the hold.
  • Colour as a check: one colour per goods type or per customer, so the wrong bundle is not lifted at the far end with a sling that looks right.
  • đóng gói: coiled and banded in bales for volume, cartoned for mixed sizes, or packed into the crate beside the goods so the slings arrive with the consignment instead of ahead of it.
sewn label on a one way sling showing working load limit and length
The sewn label carries the WLL, chiều dài, chất xơ, the batch and the standard. On a one-trip article this is the whole record.

At issue, check three places: the eye — stitch line, bar-tack and eye mouth; the band along its length — cuts, trở ngại, a thin patch that shows daylight, and any glazing or hardening from heat; and the print — if it cannot be read, the article cannot be rated. A sling that fails is destroyed rather than returned to a rack, because a band that comes back will be issued again carrying a marking nobody has checked.

Màu sắc, và số bên cạnh nó

Lên đến 10 t, TRONG 1492-1 assigns a colour to each working load limit so a supervisor can spot a wrong sling at a distance. Màu sắc là một tấm séc, never the authority: the label governs, trở lên 10 t — or on an undyed band — the print is the only statement of capacity.

Bàn 7 — EN 1492-1 mã màu, with typical width and minimum length
WLL Màu sắc Chiều rộng vải Chiều dài tối thiểu
1,000 kg màu tím 30 mm 1.1 tôi
2,000 kg Màu xanh lá 60 mm 1.2 tôi
3,000 kg Màu vàng 90 mm 1.3 tôi
4,000 kg Xám 120 mm 1.4 tôi
5,000 kg Màu đỏ 150 mm 2.0 tôi
6,000 kg Màu nâu 180 mm 2.0 tôi
8,000 kg Màu xanh da trời 240 mm 2.0 tôi
10,000 kg Quả cam 300 mm 3.0 tôi
12,000 kg Không có màu tiêu chuẩn 300 mm 3.0 tôi

các 2 t row is the one most pipe orders land on, and it shows the trade-off plainly: 2,000 kg in a 60 mm single-ply band, or the same rating in a 30 mm double-ply band that will pass a narrow eye but spreads the load over half the face. For pipe, the wider band is usually the right choice; cái 2000Cáp nâng dùng một lần KG page sets the two builds side by side.

yellow endless webbing sling loop used for pipe and tube handling
The undyed and coloured bands are the same weave: the colour is a capacity code up to 10 t, not a different grade of sling.

Thường xuyên hỏi

Is a single-eye endless sling the same as a round sling?

KHÔNG. A round sling is a bundle of filament inside a woven sleeve, with no eye and no ends; this article is a flat webbing band closed into a loop and finished with a sewn eye. The round sling conforms better and is kinder to a coated surface, the flat band is thinner, cheaper and easier to print. For a pipe that must not be marked at all, so sánh cáp treo một chiều.

Có thể sử dụng lần thứ hai được không?

It is built, được đánh dấu và định giá cho một hành trình, and it is not inspected between lifts. A second use is an uninspected article doing a job nobody rated — which is exactly the failure the one-way discipline exists to prevent. If the sling is coming back into stock, buy the returnable dây đai vải with the same rating instead.

Why one eye rather than two for pipe?

Hai mắt làm thành một chiếc địu thẳng đứng hoặc giỏ, which needs a lifting point or a pair of legs to sit on. A pipe bundle usually has neither: it has to be gripped. One eye and a tail is the whole of a choke, and a choke is what a round, slippery or coated load wants.

Tôi đặt hàng dài bao nhiêu?

The band length that gives the choke you need, worked out from the girth as in Table 5. Do not order by hook height: Một 2.5 m band on a 508 mm pipe leaves only about 0.9 m of tail once the choke has closed, which is enough to pass back through the eye and no more.

How do I stop the pipe edge cutting the band?

Three ways, in order of cost: a wider band so the load is spread over more weave; a loose wear sleeve at the contact line, which is replaced with the sling rather than repaired; and edge protectors or a soft sling where the end is sheared or the wall is thin. On coated pipe the sleeve also protects the coating, which is usually the more expensive of the two losses.

Can it be printed with our reference and packed with the goods?

Đúng. WLL, chiều dài, the batch and your own reference are printed on the band, a colour can be run per customer or per goods type, and the coils can be packed into the crate or the container with the consignment. The HS code is 630790 and the banded weight is confirmed on the quotation so the freight can be calculated before the order.

Yêu cầu báo giá

Five lines and we can quote the choke

The pipe or tube: đường kính ngoài, tường, lớp phủ, and whether it travels single or as a bundle;

The mass of one lift, and how many chokes you intend to use;

The factor your market expects — 5:1, 6:1 hoặc 7:1 — and the hook or shackle the eye must pass;

Tham khảo để in, the colour, and whether the slings ship inside the consignment.

Gửi chi tiết nâng của bạn để nhận báo giá →

Công ty TNHH giàn nâng thang máy, Ltd · Khu công nghiệp Lifute, Thành phố Thái Châu, Tỉnh Giang Tô, Trung Quốc · Mã HS 630790 · Tel / WeChat +86 180 6600 2268 · 702461526@qq.com

Đi đâu tiếp theo

four single use slings lifting a square tube bundle in a factory
Where a bundle is lifted as one body, four chokes beat two: the load is shared, and each band grips its own section instead of sliding along the pack.

Công ty giàn nâng nâng · Khu công nghiệp Lifute, Thành phố Thái Châu, Tỉnh Giang Tô, Trung Quốc · Mã HS 630790
Điện thoại +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Để lại tin nhắn của bạn

Cuộn lên trên cùng