Te mau huru tao'a

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Faataaraa poto:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Sling Tonne.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kg i 7:1, aita e metala i ni'a i te e'a. Ua hamanihia mai te roaraa, proof loaded to EN 1492-2.

Te mau haamaramaramaraa no ni'a i te tao'a

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Sling Tonne.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg i te avae e 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t te ofatiraa i te hopoi'a 1–30 m te roaraa 7:1 Paruru
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

TE 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Aita e hopearaa, aita e mata, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Te patu nei tatou i te reira mai 1 m 30 m te roaraa, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the sling porotiti Roa. The tier below is the 40 tonne; the tier above is the 60 tonne. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
TE 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Eaha te 50 t figure actually buys you

The number on the sleeve is the working load limit of hoê avae, te ta'iraa. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. E piti tauiraa o te faariro i te hoho'a avae hoê ei hoho'a i haamauhia, and both of them move it.

  • Te huru. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Te koki o te avae. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, no te mea eita roa ' tu te hoê hopoi'a mau e parahi maitai.
Taputapu 1 — What one 50 t round sling carries, by arrangement (I ROTO 1492-2 Te mau rave'a)
Ta'iraa Fa'ahoro'ā Ōhipa
Hoê sling, tūti'a × 1.0 50 t
Hoê sling, ua hepohepo × 0.8 40 t
Hoê sling, basket at 0–7° × 2.0 100 t on the sling
Hoê sling, basket at 7–45° × 1.4 70 t on the sling
Hoê sling, basket at 45–60° × 1.0 50 t
E piti ofa'i, 0–45° mai te faati'araa × 1.4 70 t set
Four slings, 0–45° mai te faati'araa × 2.1 105 t set

Read the table from the load backwards. TE 50 t hopoi'a i ni'a e piti avae 50 t slings at 0–45° (70 t set) e 60 t slings once the legs pass 45°. Piti 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

I hea 50 t sits against the tiers either side

At this size the sling is rarely the weak link: the hook, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Taputapu 2 — Single-leg rating against what a pair actually carries
Sling Tūti'a, hoê avae Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, with margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Te hoê 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

A round sling is two articles in one, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, ua ta'otohia e ua ta'otohia ma te ore e roroa; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: te mau, Snags, te hi'o, te ta'iraa chemical, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, e ere i te hoê faaho'iraa

The phrase describes the sleeve and the standard of make. TE 50 t sling is 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the sling rima piti — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Aita e metala, aita e hopearaa, no stitching in the load path — the loop is the sling.

A stiff body needs room

TE 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, te te pou faateiteiraa to bring the legs closer to vertical, e aore râ Sling porotiti e te mata made to a measured length.

Te mau rave'a aravihi

Taputapu 3 — 50 t heavy duty polyester round sling, Te mau faataaraa ti'araa
Parameter Te mau faataaraa
Hoa 50 t heavy duty polyester lifting sling, Sling porotiti hope ore, 50,000 kg afa'ifa'i
Aito Te uho o te aho tamau i roto i te hoê ahu tubular, ua opanihia i roto i te hoê loop hope ore; aita e metala i ni'a i te e'a
Uru'uru Polyester teitei (PES) rau, parallel, Ua
Patu Heavy duty woven high-tenacity polyester, single layer as standard; rima piti no te faaue
Te otia o te hopoi'a ohipa 50,000 kg (50 t), hoê avae, tūti'a
Te ofatiraa i te hopoi'a 350,000 kg i te hoê 7:1 Fa'ahoro'ā
Mea paruru 7:1 ei faito; other factors produced to order where the market requires
Te faaroaraa i te WLL Approximately 2–3 %
Te anuvera o te piha ohipa −40 °C e tae atu i te +100 °C
Te roaraa maitai 1–30 m made to order; minimum length applies at this capacity
Tae Orange ei faito; te tahi atu mau tae rima no te faanaho
Te tapa'oraa WLL e te roaraa i neneihia i nia i te rima; WLL, Raʻa, serial, te faito e te tai'o mahana
Ha'api'ira'a I ROTO 1492-2 e te ohipa paturaa i te ASME B30.9
Te tamataraa Ua faautahia te mau haapapûraa hou a tonohia ' i; hi'opo'araa i faaauhia i te numera rarahi
Te tapo'iraa Tapo'i i roto i te hoê pute poly, carton tapa'ohia; pallet e aore râ, afata ia anihia
MOQ & OEM MOQ iti no te hoê faanahoraa tamataraa; OEM i ni'a i te roaraa, tae rima, hu'ahu'a uho, te faanahoraa e te tapo'iraa
Te pee nei te diameter o te tino e te faito o te tino i te roaraa e te maitiraa o te rima, e te faaitehia ra i nia i te hoho'a i neneihia e te parau faahiti. I ni'a 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Raʻa: te roa e aore râ, te haaati

Aita e hopearaa to te hoê ofa'i hope ore, so its length can be quoted two ways and the two are a factor of two apart. Teie te hape matau - roa - hia a'e i nia i te hoê ofa'i, e i te 50 E mea moni rahi ia faatitiaifaro i muri a'e i te ohipa i tupu.

Taputapu 4 — The two length conventions
Ua faahitihia mai Te farii nei oe Ua faaohipahia no te
Te roaraa o te ohipa maitai Half the circumference — hook down to the load and back up Te mau faateiteiraa vertical e te mau, i reira te teitei e itehia ' i
Taatiraa Te roaraa taatoa o te loop Te mau ete, i reira te girth o te hopoi'a e faatupu ai i te roaraa

TE 4 m te roaraa maitai o te hoê ïa 8 m loop. On our slings the figure printed on the sleeve is the effective length, no reira, e tu'ati tamau te mau parau nene'ihia e te parau faahiti. No te hoê ete, A rave i te hopoi'a, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, e au ïa i te hooraa mai i te hoê ofa'i nainai a'e.

Te tapa'oraa, serial and proof-load traceability

I ni'a 10 t the colour code stops identifying the sling, i te 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, Raʻa, serial, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: te 12 m tino, quoted by effective length.

Ihea te hoê 50 t sling earns its place

At this capacity the sling is chosen for what it does Aita do to the load — a wire rope grommet carries the same figure. Te taa-ê-raa, o te farereiraa ïa.

  • Precast girders and bridge segments. One sling at each end, girder lifted level; E paruru te rima i te mata i hamanihia e te chamfer.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Te mau tauiraa, Te mau generator e te mau moenga mītini. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Hi'opo'araa, te aupururaa e te tatuhaaraa

Hi'opo'a na mua a'e i te mau faaohiparaa atoa, e i roto i te area taime e titauhia e to outou faatereraa. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: te mau, Snags, te hi'o, melts, te ta'iraa chemical.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: mai te mea e, aita e nehenehe faahou e tai'o i te WLL aore ra te roaraa, Eita te sling e nehenehe e haapapuhia.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, te ve'ave'a, te hoê uho o tei etaeta aore ra o tei paari, chemical attack or a missing label.
  • Ua tapo'ihia te fare toa e i raro i te tahua, i rapae i te maramarama o te mahana e i te atea i te veavea, solvents e te mau hu'ahu'a weld; Eiaha roa ' tu e tapea i te hoê ofa'i i roto i te hoê pute piri, and never drag one under load.

Ui pinepine

Can one 50 t sling lift 100 t i roto i te hoê ete?

On the sling side, ae - 100 t i te 0–7°. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

Do two 50 t slings faateitei 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, e 50 t once the legs open past 45°. A genuine 100 t hopoi'a i ni'a e piti avae 75 t, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: toro'a iti, te oraraa maitai, −40 e tae atu +100 °C, lowest cost at this rating. TE UHMWPE is worth it where the sling’s own weight is the problem — long bodies, mau ma'itiraa teitei, aore ra te hoê ofa'i e tia ia afaihia i nia i te hoê e'a.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m e aore râ 8 m?

A parau eaha te tairururaa ta outou e mana'o ra. TE 4 m te roaraa maitai o te hoê ïa 8 m loop. For a vertical or choked lift the effective length is the distance from hook to load; no te hoê ete, A tapiri i te afaraa o te hopoi'a i ni'a i te piha upoo e a faahiti i te reira.

Eaha te mau parau papa'i e horo'ahia mai e te sling?

A sewn label carrying the WLL, te roaraa e te hoho'a; te hoê parau papa'i haapapuraa i au i taua hoho'a ra; ia anihia te hoê ti'amana'oraa e te mau hoho'a. A faaite mai ia matou na mua a'e i te faanahoraa mai te peu e e hinaaro to outou matete i te hoê tapao paari.

Can the sleeve be replaced or repaired?

aita. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

A ani i te hoê 50 t parau faahiti

Send the lift, get a drawing and a price

Te hopoia i te avae, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Te roa e aore râ, te haaati, the environment, and any sleeve or marking requirement.

Send your lifting details for a quotation →

A faateitei i te Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Taina · Waehere HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Te mau tao'a i taaihia i te reira

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Te taatiraa no te Sling Rigging · Lifute Industrial Park, Te oire no Taizhou, Mataeinaa no Jiangsu, Taina · Waehere HS 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

A vaiiho i ta outou poroi

Hi'o i ni'a