Ürün Kategorileri

Heavy Duty Nylon Flat Webbing Cargo Net

Kısa Açıklama:

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Naylon Düz Dokuma Ağı,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Heavy duty nylon flat webbing cargo net: soft wide-face lifting to tens of tonnes, 7:1 faktör, 25-100 mm bantları, baskılı WLL. No wire to dent the cargo.

Ürün Detayı

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Naylon Düz Dokuma Ağı,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Cargo lifting net · nylon flat webbing · heavy duty

Heavy Duty Nylon Flat Webbing Cargo Net

An open lattice of flat high-tenacity nylon bands that lifts like a wire rope net, weighs a fraction of one, and leaves the cargo unmarked.

0.5–10 t standart, 7:1 ile 50 T sipariş üzerine inşa edildi 25–100 mm bant genişliği 100 mm kare örgü
Heavy duty nylon flat webbing cargo net laid out, turuncu 100 mm mesh lattice with four corner loops

A heavy duty nylon flat webbing cargo net is an open lattice of flat high-tenacity nylon bands, stitched into a square mesh with a folded double-stitched border and reinforced lifting loops at the corners. The load sits inside the mesh and is carried across the full width of every band beneath it. Because the bearing face is a flat band rather than a steel rope, the net presses on the cargo over a wide area and leaves paint, kaplama, bagging and machined faces as it found them.

Lift Sling Rigging Company weaves the band, stitches the net and proof-tests every one in Taizhou, Jiangsu. Band width runs from 25 mm ila 100 mm, gelen örgü 50 mm ila 300 mm, and the rated capacity of a single net from 0.5 t'ye 10 standart olarak, with heavy-duty nets built to order well beyond that — the tens-of-tonnes class is a build, not a catalogue item.

Kısa versiyon. Standard certified range 0.5–10 t at 7:1. Above that the net is built to order: wider or duplex bands, more lifting points, a spreader beam in the assembly — and its working load limit comes off the test bed, per net, not off a table.

Neden naylon, and why flat webbing

Three things separate this construction from a rope net: the shape of the bearing face, lif, and the way the load is shared.

  • Düz bant, geniş yüz. A 50 mm band lies against the cargo along its whole width. A wire rope touches on a line a few millimetres wide and concentrates everything into it — that is what dents a painted panel or bursts a paper sack.
  • Nylon takes the shock. Naylon (PA) stretches further before it parts than polyester, so a load that lands or swings is absorbed rather than transmitted to the hook. Where the lift is a steady, repetitive crane cycle, polyester is the lower-stretch choice; where the cargo is slammed down on a quay, nylon is the more forgiving net.
  • Load shared across the lattice. Every band under the load carries a share, so the net does not depend on four hard points. That is also why the same net can hold a bag stack, a pallet of bricks or a bundle of plate without repacking it.
Nylon flat webbing cargo net spread on the ground showing the reinforced border and lifting loops
The same net laid flat: folded double-stitched border round the perimeter, lifting loops stitched through it.

What “tens of tonnes” actually means

A 30 t net is not a 3 t net made bigger. Capacity is built up from four things, and each of them has to move together:

Masa 1 — How the build changes with the load
Load band Bant / inşa etmek ağ Kaldırma noktaları What else changes
0.5 – 2 T 25–50 mm single layer 50–100 mm 4 köşeler One-person handling, light cargo, bags and small parts
2 – 5 T 50 mm single layer, çift ​​dikişli kenarlık 100 mm 4 köşeler The standard port and warehouse net
5 – 10 T 50–75 mm, duplex bands on the load-bearing run 100 mm 4 köşeler, 8 istek üzerine Heavier border, reinforced loops, thicker stitch pattern
10 – 30 T 75–100 mm duplex, band count set by the load face 100–150 mm 8 points Spreader beam or master link in the assembly; net built to drawing
30 t ve üzeri 100 mm duplex or multi-layer, band spacing engineered to the load 150–200 mm 8 points or more Built and proof-tested to the lift, certificate per net

Load bands and build steps are our standard practice; the rating of any net above 10 t is fixed by its own proof test, and we quote it from that certificate.

The arithmetic behind it is plain: a band has a certified strength, the load face has a known number of bands beneath it, and the assembly is rated at the lowest of the band run, the corner loops, the master link and the sling above it. Add bands, widen them, double them, and the net grows; but the corner loops and the hardware have to grow with it, which is why the big nets are designed as a whole rather than bought by the metre.

Flat webbing against wire rope

This is the comparison buyers usually arrive with, and it is worth stating plainly — including where the wire net still wins.

Masa 2 — What changes when the net is webbing instead of wire
Nylon flat webbing net Tel halat kargo ağı
Contact with the cargo Düz bant, geniş yüz, iz bırakmayan Hat teması, işaretler ve ezikler
Effect on packaging Paper sacks, cartons and shrink wrap survive Sacks burst, cartons crush at the rope line
Ağırlık One person carries and folds a 2.5 × 2.5 m net Needs two people and lifting gear
Korozyon Paslanmaz, suited to quays and offshore decks Needs galvanised or stainless rope
Edge and cut resistance İyi, but sharp plate and flame need a sleeve or pad Very high — the reason wire nets survive scrap yards
Tamirat Re-stitch or replace a band; no swaging Cut and re-splice by a rigger
Handling noise and injury risk Quiet, no wire spikes Loud, and wire spikes cut gloves
Webbing cargo net rigged across a container opening to retain the load
Rigged in a container: the same lattice restrains as well as it lifts.

Şartname

The table is the standard nylon flat webbing net. Bant genişliği, katman sayısı, örgü, net boyut, lifting points and printing are all made to order, so read it as the starting point for a quotation rather than a fixed catalogue.

Masa 3 — Heavy duty nylon flat webbing cargo net
Parametre Şartname
Tip Open flat webbing lattice, no closed bottom; four or eight lifting points
Bant malzemesi 100 % yüksek mukavemetli naylon (PA); polyester (PET) veya polipropilen (PP) istek üzerine
Bant genişliği 25 / 30 / 50 / 75 / 100 mm
Bant kalınlığı 1.5 – 3.2 mm genişliğe bağlı olarak
Bant katmanı Bekar, veya çift yönlü (çift ​​katmanlı) for abrasion resistance and higher capacity
Örgü açıklığı 50 – 300 mm; 100 × 100 mm standardı
Mesh form Square (standart) or diamond on request
Net boyut 1.0 × 1.0 m ila 4.0 × 4.0 m standardı; 2.5 × 6 m and any size to drawing
Nominal kapasite 0.5 – 10 standart; heavier nets built to order and rated from their own proof test
Güvenlik faktörü 7:1
Kenarlık ve köşeler Folded double-stitched border; reinforced lifting loops, four or eight
Renk Turuncu yüksek görünürlük standardı; mavi, siyah, yeşil veya özel
Tedavi UV-resistant and anti-aging; abrasion-resistant finish
Çalışma sıcaklığı −40 °C ila +100 °C (polyester); nylon lower at the top end — tell us the duty
İşaretleme WLL, net boyut, mesh and date stitched on a label; WLL and brand printable on the band
Sertifikasyon CE / GS / O / ISO 9001 çalışır; breaking-load test on our own 1000 t makinesi
HS kodu 630790

Standart boyutlar

Masa 4 — Nets we build most often
Net boyut Tipik kapasite Typical load
1.0 × 1.0 M 0.5 – 2 T Machine parts, davul, küçük paletler
2.5 × 2.5 M 2 – 5 T Paletli ve torbalı kargo, container work
2.5 × 6 M 4 – 10 T Uzun kargo, pipe and plate bundles, truck beds
4.0 × 4.0 M 5 – 10 T Toplu çantalar, stacked sacks, güverte kargo
Çizim için tasarlandı 10 t and well above Hold, flat rack, spreader and plant dimensions
Flat nylon webbing cargo net with square mesh ready for a palletised load
A pallet-sized net: ortaya konuldu, load set down, four loops on the hook — no strapping of individual pieces.

Where the soft face pays for itself

  • Painted and coated steel — plate packs, kaplamalı tüp, galvanised sections: no rope line to score the finish.
  • Bagged and boxed cargo — fertiliser, çimento, tahıl, resin: the flat band does not cut into the bag.
  • Machined and plated parts — no dent, no wire mark, no rework before dispatch.
  • Marine and offshore transfer — rust-free, UV ile işlenmiş, quiet on a moving deck.
  • Konteyner doldurma ve boşaltma — light enough to pull around the cargo and fold away afterwards.
Flat webbing cargo net lifting a stack of bagged goods from its four corner loops
Lifting bagged goods: the weight is carried across every band under the load, not on four contact points.

It is not the right tool everywhere, ve bunu söylemeye değer: a webbing net is not a scrap-yard net. Sharp plate edges, torn steel and hot slag will cut or burn a band. Where the cargo is sharp, the net is supplied with edge sleeves or a heavier wear band, and the sleeves are inspected with the net.

Rigging it so the load stays inside the mesh

  • Lay the net out flat, set the load down inside the mesh and keep it clear of the border — the border is stitch, not bearing face.
  • Gather all the lifting loops onto the hook, master ring or spreader; never lift on fewer loops than the net was built with.
  • With eight points, use a spreader or two matched slings so the load is shared evenly; a net pulled from four points only will lift less than its rating allows.
  • Square the mesh under the load before taking up slack, so the bands line up with the load face instead of pulling diagonally.
  • Never drag a load sideways with the net, and never use it as a tow or lashing substitute for a load it was not rated for.

İşaretleme, baskı ve kimlik

Every net leaves with a sewn label carrying the working load limit, ağ boyutu, the mesh and the date. On top of that the band itself can be printed — WLL, net number, fleet code and your own brand — which matters where a yard runs a hundred nets and needs to know at a glance which one is which, and where an inspector needs the rating without hunting for a tag.

Muayene ve emeklilik

  • Read the label before the lift and confirm the load is inside the rating for the way the net is rigged.
  • Check every load-bearing band for cuts, aşınma, kimyasal boyama, heat glazing and broken stitching; check the border and the loops most carefully — that is where wear starts.
  • Check the printing is still legible: an unreadable WLL is a net out of service.
  • Retire the net if a band, the border or a loop is damaged, or if the mesh has been distorted by an overload. Never knot, weld or heat-repair a webbing net.
  • Temiz ve kuru olarak saklayın, yerden ve doğrudan güneş ışığından uzak, and have the net examined by a competent person at the interval your site sets.
Corner detail of a flat webbing cargo net showing the double-layer border and reinforced corner loop
Köşe detayı: two-layer stitched border and the reinforced loop the hook or master ring lifts from — the first place a net wears.

Sık sorulanlar

Can a webbing net really lift tens of tonnes?

Evet, as a build rather than a stock item. Bands get wider and duplex, the band count under the load face goes up, lifting points go from four to eight, and a spreader or master link joins the assembly. Each net of that class is proof-tested and its WLL is taken from the test, so ask for the certificate rather than a catalogue figure.

Will it mark painted or galvanised cargo?

No — that is the main reason buyers move from wire rope to webbing. The band presents a flat, soft face over its full width; a wire net concentrates the same load on a line a few millimetres wide. What a webbing net will not tolerate is a sharp edge, which is what the sleeves are for.

Naylon veya polyester?

Nylon for shock and impact — slamming a load down, rough quay handling, cargo that swings. Polyester where the lift is steady and repetitive and you want the least stretch under load. Polypropylene for wet or chemical duty and where weight matters most.

What mesh should I take?

100 × 100 mm covers bags, tuğlalar, kutular, davullar ve küçük bileşenler. Go smaller (50–75 mm) for loose small parts, ve daha büyük (150–200 mm) on big heavy nets where band strength matters more than containment.

How is the capacity proven?

Every net is breaking-load tested on our own 1000 t machine and supplied with a capacity label and a material test report; our works hold CE, GS, JIS and ISO 9001 sertifikasyon, and the test facilities are CNAS and DNV recognised.

Can you print our brand and the WLL on the band?

Evet. WLL, net boyut, fleet number and your own brand can be printed along the band, with a sewn label as well. That is the usual request from distributors and from yards that run a fleet of nets.

Teklif isteyin

Yükü gönder, not just a size

The cargo — what it is, how it is packed, and its weight as presented for the lift;

The load face — length × width, and whether the net must contain it or only hold it together;

The lifting arrangement — four or eight points, kanca, master ring or spreader, and the sling above;

The environment — quay, konteyner, offshore deck, or a coated and painted product;

The paperwork — CE marking, test report and own-brand printing if you need them.

Send the load and the net size for a quotation →

Bundan sonra nereye gitmeli

Kaldırma Askısı Arma Şirketi · Lifute Industrial Park, Taizhou Şehri, Jiangsu Eyaleti, Çin · HS kodu 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Mesajınızı Bırakın

Yukarıya Kaydır