Категорияҳои маҳсулот

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Тавсифи мухтасар:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Слинги мудаввар тонна.

50 t heavy duty polyester endless round sling: 50,000 кг дар як по, 350,000 кг дар 7:1, дар рохи борбардорй ягон металл нест. Ба дарозӣ сохта шудааст, proof loaded to EN 1492-2.

Тафсилоти маҳсулот

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Слинги мудаввар тонна.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 килограмм дар як по ва 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 т WLL per leg 350 т шикастани бори 1– 30 м дарозии самаранок 7:1 омили бехатарӣ
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

А 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Охир нест, чашм нест, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Мо онро аз 1 м ба 30 м дарозии самаранок, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, Пас, шаҳодатномаи дар папка тааллуқ ба sling дар қуттии. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the чархи мудаввар диапазон. The tier below is the 40 тонна фалакони мудаввар; the tier above is the 60 тонна фалакони мудаввар. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
А 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Чӣ 50 t figure actually buys you

The number on the sleeve is the working load limit of як по, амудӣ овезон. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Ду тасҳеҳ тасвири якпояро ба расми муқарраршуда табдил медиҳад, and both of them move it.

  • Режим. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Кунҷи по. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, зеро бори воқеӣ ҳеҷ гоҳ ба таври комил симметрӣ наменишинад.
Ҷадвал 1 — What one 50 t round sling carries, by arrangement (ДАР 1492-2 омилҳои режим)
Конфигуратсия Омил Иқтидор
Як чарх, амудӣ × 1.0 50 т
Як чарх, нафас кашидааст × 0.8 40 т
Як чарх, basket at 0–7° × 2.0 100 t on the sling
Як чарх, basket at 7–45° × 1.4 70 t on the sling
Як чарх, basket at 45–60° × 1.0 50 т
Ду чоҳ, 0-45° аз амудӣ × 1.4 70 t муқаррар
Чор порча, 0-45° аз амудӣ × 2.1 105 t муқаррар

Ҷадвалро аз бор ба қафо хонед. А 50 t бор дар ду по лозим аст 50 t дар 0—45° тоб мезананд (70 t муқаррар) ва 60 t slings once the legs pass 45°. Ду 30 t слангхо намесозанд 60 т, and two 40 т слангхо мебаранд 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Дар куҷо 50 t sits against the tiers either side

At this size the sling is rarely the weak link: қалмоқ, занҷир, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Ҷадвал 2 — Single-leg rating against what a pair actually carries
Слинг Амудӣ, як по Two legs at 0–45° Chosen when
30 т 30 т 42 т Up to about 40 t дар ду по, бо маржа
40 т 40 т 56 т 45–55 t on two legs at a moderate angle
50 т 50 т 70 т 55–65 t on two legs, or unknown weights
60 т 60 т 84 т Legs opening past 45° on a 50–60 t load

Як ягона 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

Яхдон борро мебардорад, the sleeve decides the life

Слинги мудаввар ду мақола дар як аст, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, мум карда, бе печутоб гузошта шудааст; every filament shares the load, which is how a body this slim rates at 50 т. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: буриш, бандҳо, шишабандӣ, ранг кардани химиявӣ, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Вазифаи вазнин як сохтмон аст, рейтинг нест

The phrase describes the sleeve and the standard of make. А 50 т слинг аст 50 t ҳар гуна остин; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the остини дукарата чархзании мудаввар — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Металл нест, охир нест, no stitching in the load path — the loop is the sling.

Бадани сахт ба ҳуҷра ниёз дорад

А 50 t бадан дар як радиуси танг ба таври даврӣ хам намешавад 10 т яке мекунад. Чун қоидаи корӣ, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Геометрияи қатъӣ одатан бо ҷисми дарозтар ҷавоб дода мешавад, а нури бардоштан ки пойхоро ба амудй наздик кунанд, ё а чархи мудаввар бо чашмон ба дарозии чен карда шудааст.

Параметрҳои техникӣ

Ҷадвал 3 — 50 t heavy duty polyester round sling, мушаххасоти стандартӣ
Параметр Мушаххасоти
Маҳсулот 50 t heavy duty polyester lifting sling, чархи мудаввари беохир, 50,000 кг штампи мудавварбардор
Сохтмон Асоси филаменти пайвастаи мувозӣ дар остини бофташуда, ба як ҳалқаи беохир баста; дар рохи борбардорй ягон металл нест
Асосӣ Полиэстери тобовар (PES) бисёрфиламент, параллел гузоштан, муми
остин Полиэстери тобовар бофтаи вазнин, як қабати ҳамчун стандарт; остин дукарата барои фармоиш
Маҳдудияти сарбории корӣ 50,000 кг (50 т), пои ягона, амудӣ
Сарбории шикаста 350,000 кг дар а 7:1 омил
Омили бехатарӣ 7:1 ҳамчун стандарт; омилҳои дигаре, ки барои фармоиш истеҳсол карда мешаванд, ки бозор талаб мекунад
Дарозии WLL Approximately 2–3 %
Ҳарорати хидмат -40 °C то +100 °C
Дарозии самаранок 1–30 m made to order; дарозии ҳадди ақал ба ин иқтидор дахл дорад
Ранги Норанҷӣ ҳамчун стандарт; дигар рангҳои остин барои фармоиш
Нишон додан WLL ва дарозии дар остин чоп; тамғаи бо WLL дӯхташуда, дарозӣ, серия, стандарт ва сана
Стандарт ДАР 1492-2 ва амалияи сохтмони ASME B30.9
Санҷиш Исбот пеш аз фиристодан бор карда шудааст; сабти санҷиш ба рақами силсилавӣ мувофиқат мекунад
Бастабандӣ Капка дар халтаи полиэтиленӣ, картон нишондодашуда; паллет ё сандуқ мувофиқи дархост
MOQ & OEM MOQ паст барои фармоиши озмоишӣ; OEM оид ба дарозӣ, ранги остин, нахи аслӣ, тарҳбандии тамғакоғазӣ ва бастабандӣ
Body diameter and unit mass follow the length and the sleeve option, ва дар расми бо иқтибос додашуда нишон дода мешаванд. Дар боло 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Дарозӣ: effective length or circumference

Фаҳмони беохир интиҳо надорад, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, ва дар 50 t it is an expensive one to correct after the event.

Ҷадвал 4 — The two length conventions
Иқтибос оварда шудааст You receive Барои истифода бурда мешавад
Давомнокии кори самаранок Нисфи давра - қалмоқе поён ба сарборӣ ва нусхабардорӣ Лифтҳои амудӣ ва қаҳваранг, where the hanging height is known
Давра Дарозии даври пурра Лифтҳои сабад, where the girth of the load drives the length

А 4 м дарозии самаранок як аст 8 ҳалқаи м. On our slings the figure printed on the sleeve is the effective length, Пас чоп ва иқтибос ҳамеша мувофиқат мекунанд. Барои бардорандаи сабад, гирдогирди борро гиред, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, ки ин ба харидани фалаки хурдтар баробар аст.

Нишон додан, serial and proof-load traceability

Дар боло 10 t the colour code stops identifying the sling, ҳамин тавр дар 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Тамғаи дӯхташуда WLL-ро дорад, дарозӣ, серия, стандарт ва санаи истеҳсолот; сериал он чизест, ки слинги ҷисмониро ба ҳуҷҷатгузории он мепайвандад.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Шаҳодатномаи нах ва рақамҳои партия дар дархост дастрасанд; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: а 12 м бадан, quoted by effective length.

Дар куҷо а 50 t sling earns its place

At this capacity the sling is chosen for what it does не do to the load — a wire rope grommet carries the same figure. Фарқият дар тамос аст.

  • Камарҳои васлшуда ва сегментҳои пул. Дар ҳар як нӯги як қуттӣ, сатҳ бардошта шуд; остин чеҳраи ташаккулёфта ва қафоро муҳофизат мекунад.
  • Steel coils and plate packs. Сабад дар зери қуттӣ, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Трансформаторҳо, генераторхо ва катхои машинахо. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Блокҳои киштӣ ва модул. Чор-нуқта бо нури боло, ки дар он кунҷи фалаҷ тағирёбандаест, ки маҷмӯи қарорро муайян мекунад.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Тафтиш, нигоҳубин ва нафақа

Пеш аз ҳар истифода тафтиш кунед, ва расман дар фосилае, ки режими шумо талаб мекунад. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: буриш, бандҳо, шишабандӣ, melts, ранг кардани химиявӣ.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Нишон ва чоп: агар WLL ё дарозиро дигар хондан мумкин набошад, слингро тафтиш кардан мумкин нест.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, шишабандии гармӣ, ядрое, ки сахт ё лӯнда шудааст, chemical attack or a missing label.
  • Нигоҳ доштани печонидашуда ва берун аз фарш, аз равшании рӯз ва дур аз гармӣ, ҳалкунандаҳо ва пошидани кафшер; ҳеҷ гоҳ фалаконро дар халтаи пӯшида тар нигоҳ надоред, and never drag one under load.

зуд-зуд пурсида мешавад

Can one 50 t лифт 100 т дар сабад?

Дар тарафи слинг, ҳа - 100 t дар 0—7°. Дар амал қалмоқ, пайванди усто ё чӯбро дар болои он низ бояд барои баҳои 100 т, ва дар ин андоза кран одатан нест. Ин аст, ки чаро сабад дар 50 t як қарори ҳалкунанда ва дуюм қарори қобилият аст.

Ду кор кунед 50 т бардорандаи фалаҳо 100 т?

Not at an angle. Two legs at 0–45° from vertical carry 70 т, ва 50 t once the legs open past 45°. A genuine 100 t бор дар ду по лозим аст 75 т слангҳо, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: дарозии паст, ҳаёти хуби абрешим, -40 то +100 °C, lowest cost at this rating. А Асоси UHMWPE is worth it where the sling’s own weight is the problem — long bodies, интихобҳои баланд, ё фалак, ки бояд бо нардбон бардошта шавад.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 м ё 8 м?

Бигӯед, ки кадом конвенсияро дар назар доред. А 4 м дарозии самаранок як аст 8 ҳалқаи м. For a vertical or choked lift the effective length is the distance from hook to load; барои сабад, гирдогирди борро ба сарлавҳа илова кунед ва онро иқтибос кунед.

Кадом ҳуҷҷатҳо бо слинг меояд?

A sewn label carrying the WLL, дарозӣ ва силсилавӣ; сабти исбот-бор мувофиқ ба он силсилаи; сертификати нахи ва рақамҳои партияи оид ба дархост. Пеш аз фармоиш ба мо бигӯед, ки оё бозори шумо ба тамғаи мушаххаси стандартӣ ниёз дорад.

Can the sleeve be replaced or repaired?

Не. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Дархост а 50 t иқтибос sling мудаввар

Send the lift, get a drawing and a price

Сарборӣ ба як пой, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Дарозӣ ё гирду атроф самаранок, муҳити зист, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Ширкати Lift Sling Rigging Co., Ltd · Парки саноатии Lifute, Тайчжоу, Цзянсу, Чин · Рамзи HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Маҳсулоти алоқаманд

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Ширкати Rigging Sling Lift · Lifute Industrial Park, Шаҳри Тайчжоу, Вилояти Цзянсу, Чин · Рамзи HS 630790
Тел +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Паёми худро тарк кунед

Ба боло ҳаракат кунед