தயாரிப்பு வகைகள்

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

சுருக்கமான விளக்கம்:

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way endless sling, ஒற்றை கண், for steel pipe and tube: 25-300 மிமீ பாலியஸ்டர், 1-24 டி டபிள்யூஎல்எல், choke factor 0.8. WLL மற்றும் நீளம் இசைக்குழுவில் அச்சிடப்பட்டுள்ளது.

தயாரிப்பு விவரம்

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way sling · single eye · steel pipe and tube

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

A closed loop with one eye, bought for one journey: the choke grips the pipe by its own tension and the sling ships out with the consignment.

1–24 டி WLL range 25–300 மி.மீ பட்டை அகலம் 0.8 choke factor ±2 % length tolerance
one way endless lifting slings single eye carrying a steel pipe under a crane hook

This is the one-way build of the endless sling: the same closed loop that is thrown round a bundle, made in the single-eye form so that the tail can be passed back through the eye and pulled down into a choke. It is bought with the consignment rather than drawn from a lifting store, it grips the pipe by its own tension, and it is cut off at the far end instead of being recovered. Sizes run from 25 மிமீ முதல் 300 மிமீ வலையமைப்பு, 1 டி செய்ய 24 டி working load limit and 0.5 மீ முதல் 100 மீ of band, at a factor of 5:1, 6:1 அல்லது 7:1.

விரைவான பதில்: a single-eye endless sling is a choker. One eye means the band can be passed round the pipe and back through itself, which is the cheapest way to grip a round, slippery or coated load — and the grip increases with the load instead of depending on friction alone.

What the three words decide

The name carries three separate decisions and they are worth separating, because buyers often use the words interchangeably and then order the wrong article. ஒரு வழி says what happens after the lift. முடிவற்ற says the shape of the band. ஒற்றைக் கண் says how the sling meets the load. Only the third one changes the lift itself.

அட்டவணை 1 — The three words, and what each one actually decides
வார்த்தை அது என்ன முடிவு செய்கிறது What it does not change
ஒரு வழி The sling travels with the load and is not recovered; ஒரு ஆய்வு, பிரச்சினையில்; bought and counted in quantities The weave, காரணி, the proof test or the marking — all identical to a returnable sling
முடிவற்ற The band is closed into a loop with no free ends, so it can be wrapped round a section and closed on itself Whether the article is reused; endless slings are made in both builds
ஒற்றைக் கண் A choke. வால் சுமையைச் சுற்றிக் கொண்டு மீண்டும் கண் வழியாகச் செல்கிறது, and the noose closes as the hook takes up The vertical rating printed on the band — the choke derates it to 0.8

Read together, the phrase describes one article: a closed-loop polyester sling, finished with a single eye, issued for one pipe or tube consignment. Where the consignment is lifted and then re-slung at the far end, the same band is often supplied in the two-eye looped end single use lifting sling form instead, because the receiving site can then hang it without threading a choke.

Why a choke is the right grip for pipe

A pipe is the worst case for a sling that relies on friction: it is round, it rolls, the wall is thin at the contact line and the coating is softer than the steel under it. A choke answers all four problems at once.

  • The grip is generated, not borrowed. The noose closes as the load comes on, so the band tightens round the pipe in proportion to the weight it is carrying; a vertical sling on a bare pipe has only friction and balance holding it.
  • One contact line, chosen by you. The band bears on a single line of the wall. Set that line where the pipe is strongest — behind the end collar, away from a weld seam — and the load is carried where you put it.
  • Nothing metal touches the pipe. There are no hooks, shackles or buckles on the article, so a coated or painted pipe is not scratched at the sling point.
  • The sling stays where it was fitted. On a one-way build the choke is made at loading and left closed, so the receiving site lifts the bundle with the same sling it arrived in, without a rigger and without a plan.
choker eye closing on a bundle of steel tubing in a warehouse
The choke closing on a tube bundle. ஒரு கண், ஒரு வால், one journey — the sling stays on the load and ships out with it.

The trade-off is length: a choke consumes reach, because the tail has to come back through the eye and lie alongside the standing part. That is why a one-way pipe sling is ordered by the girth of the bundle rather than by the height of the hook, and why the length arithmetic further down this page starts from the circumference.

விவரக்குறிப்பு

Four lines on the order decide the price — width, காரணி, length and marking — because the eye is formed from the same band and adds nothing to the cost but a stitch pattern.

அட்டவணை 2 — Single-eye endless one-way sling, நிலையான விவரக்குறிப்பு
அளவுரு நிலையான உருவாக்கம் குறிப்புகள்
வலையமைப்பு Flat woven high-tenacity polyester, 25-300 மிமீ அகலம் 4 மிமீ அல்லது 7.5 மிமீ இசைக்குழு; one to three plies at the heavy end
வேலை சுமை வரம்பு 1 t - 24 ஒரு ஸ்லிங்கிற்கு டி செங்குத்து, single leg — the figure printed on the band
வடிவமைப்பு காரணி 5:1 / 6:1 / 7:1 The same WLL needs a wider band at 7:1 விட 5:1
படிவம் Closed loop with one formed eye Eye stitched and bar-tacked at the mouth
நீளம் 0.5 மீ - 100 m of band Quoted as band length; the choke takes up reach
Eye clear length 250 மிமீ மணிக்கு 1 டி செய்ய 650 மிமீ மணிக்கு 15 டி Sized to the hook bowl or pin, plus about 10 மிமீ
நிறம் ஆர்டர் செய்ய; IN 1492-1 code up to 10 டி Usually matched to the goods it travels with
வெப்பநிலை −40 °C முதல் +100 °C பாலியஸ்டர்; attacked by concentrated acids
குறியிடுதல் WLL, நீளம், நார்ச்சத்து, batch and your reference Printed on the band and repeated on a sewn label
பேக்கிங் சுருண்டது, banded in bales or cartoned Can be packed into the crate or container with the goods
HS குறியீடு 630790 Packing list line, not a lifting register entry

The size ladder: WLL, width and factor

The factor is a market decision as much as an engineering one: அதே 5 டி ஸ்லிங் ஆகும் 125 மிமீ மணிக்கு 5:1, 250 மிமீ மணிக்கு 6:1 மற்றும் 150 மிமீ மணிக்கு 7:1 ஒரு மீது 4 மிமீ இசைக்குழு. Tell us the factor your market expects and the width follows from the ladder below.

அட்டவணை 3 — Width against working load limit (4 மிமீ இசைக்குழு)
WLL மணிக்கு 5:1 மணிக்கு 6:1 மணிக்கு 7:1 குறைந்தபட்ச நீளம்
1 டி 25 மிமீ 50 மிமீ 30 மிமீ 0.5 மீ
2 டி 50 மிமீ 100 மிமீ 60 மிமீ 1.0 மீ
3 டி 75 மிமீ 150 மிமீ 90 மிமீ 1.0 மீ
5 டி 125 மிமீ 250 மிமீ 150 மிமீ 1.5 மீ
8 டி 200 மிமீ 200 மிமீ 240 மிமீ 2.0 மீ
10 டி 250 மிமீ 250 மிமீ 300 மிமீ 2.0 மீ

Widths as published on our single use slings ladder; the full range continues in double ply to 24 டி. Where a row shows the same width at two factors, that is the current ladder quoted as it stands.

What a choke does to the figure on the band

The number printed on the band is the vertical, ஒற்றை கால் மதிப்பீடு. A choker costs a fifth of it, and that is not a safety margin — it is the capacity. Decide the arrangement before the tonnage, then buy the sling that carries the load in that arrangement.

அட்டவணை 4 — Capacity by hitch (worked for a 5 டி ஸ்லிங்)
ஏற்பாடு காரணி ஒரு திறன் 5 டி ஸ்லிங்
செங்குத்து, ஒரு கால் × 1.0 5,000 கிலோ
Choked — the form on this page × 0.8 4,000 கிலோ
கூடை, two parts at 0–45° × 2.0 10,000 கிலோ
கூடை, two parts at 45–60° × 1.4 7,000 கிலோ
Two-leg assembly at 0–45° × 1.4 7,000 kg per pair
Two-leg assembly at 45–60° × 1.0 5,000 kg per pair
Three or four legs at 0–45° × 2.1 10,500 kg set
Three or four legs at 45–60° × 1.5 7,500 kg set

A worked case from a pipe yard: அ 9.6 t bundle of 508 மிமீ குழாய், lifted on four chokes. Each sling carries 9,600 ÷ 4 = 2,400 கிலோ, and because the hitch is a choke the rating has to be 2,400 ÷ 0.8 = 3,000 கிலோ. ஏ 3 t band at the factor your market uses is the answer — not a 2.4 டி ஒன்று, which is the figure that comes out if the choke derate is forgotten. On two chokes the same bundle needs 6 t bands.

நீளம்: from the pipe circumference to the band you order

A choke is ordered by the girth of the load, not by the height of the hook. Measure the bundle — for a single pipe, π × outside diameter; for a square or rectangular pack, twice the width plus twice the height — then add what the choke itself consumes. In quotation we use:

Band length ≈ girth + eye and tail allowance + handling allowance, where the eye and tail allowance is about 0.3 மீ, and the handling allowance is 0.3–0.5 m for the tail to come back through the eye and lie alongside the standing part. Round up to the next half metre. The finished length is confirmed against your drawing before the bands are cut; the tolerance on a sewn article is ±2 %.

அட்டவணை 5 — Girth of common pipe sizes, and the band to start from
Pipe OD Girth (π × OD) Starting band length Typical arrangement
168 மிமீ 0.53 மீ 1.0 – 1.5 மீ Two to four lengths
219 மிமீ 0.69 மீ 1.5 மீ Two to three lengths
273 மிமீ 0.86 மீ 1.5 – 2.0 மீ Two lengths
325 மிமீ 1.02 மீ 2.0 மீ Two lengths
406 மிமீ 1.28 மீ 2.0 – 2.5 மீ Single or paired
508 மிமீ 1.60 மீ 2.5 மீ Single or paired
610 மிமீ 1.92 மீ 2.5 – 3.0 மீ ஒற்றை
762 மிமீ 2.39 மீ 3.0 – 3.5 மீ ஒற்றை

Starting lengths assume a single wrap and a 0.6 m allowance. A bundle wider than one pipe, a double wrap, or a tail that has to be tied off adds to the figure — send the bundle dimensions and the length is quoted against them.

செயல்பட்ட உதாரணம்: one length of 508 mm pipe, ஒற்றை மூச்சுத்திணறல். Girth 1.60 மீ + 0.6 m = 2.2 மீ, rounded up to a 2.5 மீ இசைக்குழு. A pair of the same pipes is measured on the pair, not on the pipe: 1.016 m wide by 0.508 m deep gives 2 × 1.016 + 2 × 0.508 = 3.05 m of girth, அதனால் 3.65 m with the allowance and a 4 மீ இசைக்குழு.

Choosing the band for the pipe you have

The wall, the coating and the end finish decide the width more often than the tonnage does, because the failure on pipe work is a cut or a crush at one contact line rather than a break in the middle of the band. The widths below are the starting point we quote from; take one size up where the pipe is coated, painted or has a sheared end.

அட்டவணை 6 — Band width by pipe size and finish
Pipe outside diameter Bare black pipe Coated, painted or lined
வரை 200 மிமீ 50 – 75 மிமீ 75 – 100 மிமீ, தொடர்பு வரியில் ஸ்லீவ்
200 – 400 மிமீ 75 – 100 மிமீ 100 – 150 மிமீ
400 – 600 மிமீ 100 – 150 மிமீ 150 மிமீ, 7.5 மிமீ இசைக்குழு
மேலே 600 மிமீ 150 மிமீ, 7.5 மிமீ இசைக்குழு 150 – 200 mm with wear sleeve
தொகுக்கப்பட்ட குழாய் மற்றும் சுயவிவரங்கள் 75 – 200 மிமீ 200 mm if the ends are square-cut

Three details are worth settling at the quotation rather than at the quay. ஏ ஸ்லீவ் அணியுங்கள் slid over the contact point takes the abrasion that would otherwise go into the load-bearing weave. ஏ வலுவூட்டப்பட்ட கண் in a sleeve keeps a steel hook or shackle pin off the stitch line. And on thin-wall tube the choke should sit where the section is supported, not on an unsupported span — a 3 mm wall will oval under a choke that a 10 mm wall would not notice.

white polyester sling with reinforced red eyes for pipe lifting
A reinforced eye in a red sleeve: on pipe work the eye sits against the hook and takes the wear, which is cheaper than buying a size up.

குறியிடுதல், packing and the one inspection

A one-way sling is inspected once, பிரச்சினையில், and that inspection is the only one it will get. Everything the receiving site needs to know therefore has to be on the article, in a form that survives a sea freight and a forklift.

  • Printed on the band: working load limit and length, at a size a rigger can read from the ground — for example “WLL 3ton 2.5m”.
  • Sewn label at the eye: the same figures plus the fibre, தொகுதி, the design factor and the standard; CE marking where the 7:1 series is supplied for a market that requires it, and type-test reports for other factors.
  • Your reference: order, bundle or project number printed at the same time as the WLL — printed into the band, not applied as a sticker that lifts in the hold.
  • Colour as a check: one colour per goods type or per customer, so the wrong bundle is not lifted at the far end with a sling that looks right.
  • பேக்கிங்: coiled and banded in bales for volume, cartoned for mixed sizes, or packed into the crate beside the goods so the slings arrive with the consignment instead of ahead of it.
sewn label on a one way sling showing working load limit and length
The sewn label carries the WLL, நீளம், நார்ச்சத்து, the batch and the standard. On a one-trip article this is the whole record.

At issue, check three places: the eye — stitch line, bar-tack and eye mouth; the band along its length — cuts, ஸ்னாக்ஸ், a thin patch that shows daylight, and any glazing or hardening from heat; and the print — if it cannot be read, the article cannot be rated. A sling that fails is destroyed rather than returned to a rack, because a band that comes back will be issued again carrying a marking nobody has checked.

நிறம், மற்றும் அதன் அருகில் உள்ள எண்

வரை 10 டி, IN 1492-1 assigns a colour to each working load limit so a supervisor can spot a wrong sling at a distance. நிறம் ஒரு காசோலை, never the authority: the label governs, மற்றும் மேலே 10 t — or on an undyed band — the print is the only statement of capacity.

அட்டவணை 7 — EN 1492-1 வண்ண குறியீடு, with typical width and minimum length
WLL நிறம் வலைப்பின்னல் அகலம் குறைந்தபட்ச நீளம்
1,000 கிலோ வயலட் 30 மிமீ 1.1 மீ
2,000 கிலோ பச்சை 60 மிமீ 1.2 மீ
3,000 கிலோ மஞ்சள் 90 மிமீ 1.3 மீ
4,000 கிலோ சாம்பல் 120 மிமீ 1.4 மீ
5,000 கிலோ சிவப்பு 150 மிமீ 2.0 மீ
6,000 கிலோ பழுப்பு 180 மிமீ 2.0 மீ
8,000 கிலோ நீலம் 240 மிமீ 2.0 மீ
10,000 கிலோ ஆரஞ்சு 300 மிமீ 3.0 மீ
12,000 கிலோ நிலையான நிறம் இல்லை 300 மிமீ 3.0 மீ

தி 2 t row is the one most pipe orders land on, and it shows the trade-off plainly: 2,000 kg in a 60 mm single-ply band, or the same rating in a 30 mm double-ply band that will pass a narrow eye but spreads the load over half the face. For pipe, the wider band is usually the right choice; தி 2000KG ஒருமுறை பயன்படுத்தும் தூக்கும் கவண்கள் page sets the two builds side by side.

yellow endless webbing sling loop used for pipe and tube handling
The undyed and coloured bands are the same weave: the colour is a capacity code up to 10 டி, not a different grade of sling.

அடிக்கடி கேட்கப்படும்

Is a single-eye endless sling the same as a round sling?

இல்லை. A round sling is a bundle of filament inside a woven sleeve, with no eye and no ends; this article is a flat webbing band closed into a loop and finished with a sewn eye. The round sling conforms better and is kinder to a coated surface, the flat band is thinner, cheaper and easier to print. For a pipe that must not be marked at all, ஒப்பிடு ஒரு வழி சுற்று slings.

இரண்டாவது முறை பயன்படுத்தலாமா?

It is built, ஒரு பயணத்திற்கு குறிக்கப்பட்ட மற்றும் விலை, and it is not inspected between lifts. A second use is an uninspected article doing a job nobody rated — which is exactly the failure the one-way discipline exists to prevent. If the sling is coming back into stock, buy the returnable வலை கவண் with the same rating instead.

Why one eye rather than two for pipe?

இரண்டு கண்கள் ஒரு செங்குத்து அல்லது கூடை கவண் செய்ய, which needs a lifting point or a pair of legs to sit on. A pipe bundle usually has neither: it has to be gripped. One eye and a tail is the whole of a choke, and a choke is what a round, slippery or coated load wants.

நான் எவ்வளவு நீளத்தை ஆர்டர் செய்கிறேன்?

The band length that gives the choke you need, worked out from the girth as in Table 5. Do not order by hook height: அ 2.5 m band on a 508 mm pipe leaves only about 0.9 m of tail once the choke has closed, which is enough to pass back through the eye and no more.

How do I stop the pipe edge cutting the band?

Three ways, in order of cost: a wider band so the load is spread over more weave; a loose wear sleeve at the contact line, which is replaced with the sling rather than repaired; and edge protectors or a soft sling where the end is sheared or the wall is thin. On coated pipe the sleeve also protects the coating, which is usually the more expensive of the two losses.

Can it be printed with our reference and packed with the goods?

ஆம். WLL, நீளம், the batch and your own reference are printed on the band, a colour can be run per customer or per goods type, and the coils can be packed into the crate or the container with the consignment. The HS code is 630790 and the banded weight is confirmed on the quotation so the freight can be calculated before the order.

மேற்கோளைக் கோரவும்

Five lines and we can quote the choke

The pipe or tube: வெளிப்புற விட்டம், wall, coating, and whether it travels single or as a bundle;

The mass of one lift, and how many chokes you intend to use;

The factor your market expects — 5:1, 6:1 அல்லது 7:1 — and the hook or shackle the eye must pass;

அச்சிடுவதற்கான குறிப்பு, நிறம், and whether the slings ship inside the consignment.

Send your lifting details for a quotation →

லிஃப்ட் ஸ்லிங் ரிக்கிங் கோ., Ltd · Lifute Industrial Park, தைஜோ நகரம், ஜியாங்சு மாகாணம், சீனா · HS குறியீடு 630790 · Tel / WeChat +86 180 6600 2268 · 702461526@qq.com

அடுத்து எங்கு செல்வது

four single use slings lifting a square tube bundle in a factory
Where a bundle is lifted as one body, four chokes beat two: the load is shared, and each band grips its own section instead of sliding along the pack.

லிஃப்ட் ஸ்லிங் ரிக்கிங் நிறுவனம் · Lifute Industrial Park, தைஜோ நகரம், ஜியாங்சு மாகாணம், சீனா · HS குறியீடு 630790
டெல் +86 523 8693 5818 · வாட்ஸ்அப் +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

உங்கள் செய்தியை விடுங்கள்

மேலே உருட்டவும்