Produktkategorier

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kort beskrivning:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Rund Sling.

50 t heavy duty polyester endless round sling: 50,000 kg per ben, 350,000 kg vid 7:1, ingen metall i lastvägen. Tillverkad i längd, proof loaded to EN 1492-2.

Produktdetaljer

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Rund Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per ben och 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t brytande last 1–30 m effektiv längd 7:1 säkerhetsfaktor
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Det finns inga slut, inga ögon, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Vi bygger det av 1 m till 30 m effektiv längd, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the rund sele räckvidd. The tier below is the 40 ton rund sele; the tier above is the 60 ton rund sele. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Vad det 50 t figure actually buys you

The number on the sleeve is the working load limit of ett ben, hängande vertikalt. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Två justeringar gör enbensfiguren till en fast figur, and both of them move it.

  • Läget. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Benvinkeln. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, eftersom en riktig last aldrig sitter perfekt symmetriskt.
Tabell 1 — What one 50 t round sling carries, by arrangement (I 1492-2 lägesfaktorer)
Konfiguration Faktor Kapacitet
En sele, vertikal × 1.0 50 t
En sele, kvävdes × 0.8 40 t
En sele, basket at 0–7° × 2.0 100 t on the sling
En sele, basket at 7–45° × 1.4 70 t on the sling
En sele, basket at 45–60° × 1.0 50 t
Två selar, 0–45° från vertikalen × 1.4 70 t set
Fyra selar, 0–45° från vertikalen × 2.1 105 t set

Läs tabellen från lasten baklänges. A 50 t belastning på två ben behöver 50 t selar vid 0–45° (70 t set) och 60 t slings once the legs pass 45°. Två 30 t selar gör inte 60 t, and two 40 t selar bära 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Där 50 t sits against the tiers either side

At this size the sling is rarely the weak link: kroken, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tabell 2 — Single-leg rating against what a pair actually carries
Sling Vertikal, ett ben Two legs at 0–45° Valt när
30 t 30 t 42 t Up to about 40 t på två ben, med marginal
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

En singel 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

En rund sele är två artiklar i en, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: skärsår, hakar, glasering, kemisk färgning, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty är en konstruktion, inte ett betyg

The phrase describes the sleeve and the standard of make. A 50 t sling är 50 t oavsett ärm; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the dubbel ärm rund sele — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Ingen metall, inga slutar, no stitching in the load path — the loop is the sling.

En stel kropp behöver plats

A 50 Kroppen böjer sig inte runt en snäv radie som a 10 det gör man inte. Som arbetsregel, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometri besvaras vanligtvis med en längre kropp, a lyftbalk för att föra benen närmare vertikalt, eller a rund sele med ögon gjord till en uppmätt längd.

Tekniska parametrar

Tabell 3 — 50 t heavy duty polyester round sling, standardspecifikation
Parameter Specifikation
Produkt 50 t heavy duty polyester lifting sling, ändlös rund sele, 50,000 kg rund lyftsele
Konstruktion Kontinuerlig parallell filamentkärna i en vävd rörformig hylsa, stängd i en oändlig slinga; ingen metall i lastvägen
Kärna Höghållfast polyester (PES) multifilament, parallell läggning, vaxad
Ärm Kraftig vävd höghållfast polyester, enkellager som standard; dubbel hylsa på beställning
Arbetsbelastningsgräns 50,000 kg (50 t), enda ben, vertikal
Brytande last 350,000 kg vid a 7:1 faktor
Säkerhetsfaktor 7:1 som standard; andra faktorer framtagna på beställning där marknaden så kräver
Förlängning vid WLL Approximately 2–3 %
Servicetemperatur −40 °C till +100 °C
Effektiv längd 1–30 m made to order; minsta längd gäller vid denna kapacitet
Färg Orange som standard; andra ärmfärger på beställning
Märkning WLL och längd tryckt på ärmen; sydd etikett med WLL, längd, serie, standard och datum
Standard I 1492-2 och ASME B30.9 byggpraxis
Testning Bevis laddat före avsändning; testposten matchade serienumret
Förpackning Spola i en polypåse, märkt kartong; pall eller låda på begäran
MOQ & OEM Låg MOQ för en provorder; OEM på längd, ärmfärg, kärnfiber, etikettlayout och packning
Kroppsdiameter och enhetsmassa följer längden och ärmalternativet, och visas på ritningen som bifogas offerten. Ovan 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Längd: effektiv längd eller omkrets

En ändlös sele har inga ändar, so its length can be quoted two ways and the two are a factor of two apart. Detta är det vanligaste beställningsfelet på en rund sele, och kl 50 t det är dyrt att korrigera efter händelsen.

Tabell 4 — The two length conventions
Citerat som Du tar emot Används för
Effektiv arbetslängd Halva omkretsen — haka ner i lasten och backa upp Vertikala och kvävda lyft, där hänghöjden är känd
Omkrets Hela slinglängden Korglyft, där lastens omkrets driver längden

A 4 m effektiv längd är en 8 m slinga. On our slings the figure printed on the sleeve is the effective length, så trycket och offerten överensstämmer alltid. För en korglyft, ta lastens omkrets, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, vilket är samma sak som att köpa en mindre sele.

Märkning, serial and proof-load traceability

Ovan 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, längd, serie, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m kropp, quoted by effective length.

där a 50 t sling earns its place

At this capacity the sling is chosen for what it does inte do to the load — a wire rope grommet carries the same figure. Skillnaden är kontakten.

  • Prefabricerade balkar och brosegment. En sele i varje ände, balk lyft i nivå; hylsan skyddar det formade ansiktet och fasningen.
  • Steel coils and plate packs. Korg under förpackningen, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformatorer, generatorer och maskinbäddar. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Skepp och modulblock. Fyrpunkt med en balk ovanför, där slingvinkeln är den variabel som avgör mängden.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspektion, vård och pension

Inspektera före varje användning, och formellt med det intervall som din regim kräver. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: skärsår, hakar, glasering, melts, kemisk färgning.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Etikett och tryck: om WLL eller längden inte längre kan läsas, selen kan inte verifieras.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, värmeglas, en kärna som har blivit stel eller knölig, chemical attack or a missing label.
  • Förvara ihoprullad och från golvet, utom dagsljus och borta från värme, lösningsmedel och svetsstänk; Förvara aldrig en sele våt i en stängd påse, and never drag one under load.

Vanliga frågor

Can one 50 t lyftsele 100 t i en korg?

På selesidan, ja — 100 t vid 0–7°. I praktiken kroken, masterlänk eller balk ovanför måste också klassificeras för 100 t, och i denna storlek är det vanligtvis inte kranen. Det är därför korgen kl 50 t är ett greppbeslut först och ett kapacitetsbeslut därefter.

Gör två 50 t selar lyft 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, och 50 t once the legs open past 45°. A genuine 100 t belastning på två ben behöver 75 t selar, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: låg sträcka, bra nötningslivslängd, −40 till +100 °C, lowest cost at this rating. A UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, höga val, eller en sele som måste bäras upp på en stege.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m eller 8 m?

Säg vilken konvention du menar. A 4 m effektiv längd är en 8 m slinga. For a vertical or choked lift the effective length is the distance from hook to load; för en korg, lägg till lastens omkrets till takhöjden och citera det.

Vilken dokumentation som följer med selen?

A sewn label carrying the WLL, längd och serie; en korrekturladdningspost som matchar den serien; ett fibercertifikat och partisiffror på begäran. Berätta innan beställningen om din marknad behöver en specifik standardmärkning.

Can the sleeve be replaced or repaired?

Inga. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Begär a 50 t rund sling offert

Send the lift, get a drawing and a price

Belastning per ben, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effektiv längd eller omkrets, the environment, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Kina · HS-kod 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Relaterade produkter

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Liftsling Rigging Company · Lifute Industrial Park, Taizhou stad, Jiangsu-provinsen, Kina · HS-kod 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Lämna ditt meddelande

Bläddra till toppen