• Imah /
  • Produk /
  • 50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kategori Produk

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Pedaran pondok:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Babak aisan.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kg ku 7:1, euweuh logam dina jalur beban. Dijieun panjang, proof loaded to EN 1492-2.

Rincian produk

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Babak aisan.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg jeung 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t megatkeun beban 1–30 m panjang éféktif 7:1 faktor kaamanan
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Teu aya tungtungna, euweuh panon, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Urang ngawangun ti 1 m ka 30 m panjangna éféktif, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, jadi sertipikat dina folder milik aisan dina peti. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the aisan buleud rentang. The tier below is the 40 ton aisan buleud; the tier above is the 60 ton aisan buleud. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Naon 50 t figure actually buys you

The number on the sleeve is the working load limit of hiji suku, ngagantung vertikal. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Dua pangaluyuan ngahurungkeun inohong single-leg kana inohong set, and both of them move it.

  • Modeu. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Sudut suku. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, sabab beban nyata pernah diuk sampurna simetris.
Méja 1 — What one 50 t round sling carries, by arrangement (DI 1492-2 faktor modus)
Konfigurasi Faktor Kapasitas
Hiji aisan, nangtung × 1.0 50 t
Hiji aisan, dicekek × 0.8 40 t
Hiji aisan, basket at 0–7° × 2.0 100 t on the sling
Hiji aisan, basket at 7–45° × 1.4 70 t on the sling
Hiji aisan, basket at 45–60° × 1.0 50 t
Dua alungan, 0-45 ° ti nangtung × 1.4 70 t diatur
Opat alungan, 0-45 ° ti nangtung × 2.1 105 t diatur

Baca tabel tina beban ka tukang. A 50 t beban dina dua suku perlu 50 t slings dina 0-45 ° (70 t diatur) jeung 60 t slings once the legs pass 45°. dua 30 t slings teu nyieun 60 t, and two 40 t slings mawa 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

dimana 50 t sits against the tiers either side

At this size the sling is rarely the weak link: pancing, belenggu, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Méja 2 — Single-leg rating against what a pair actually carries
Sleting Nangtung, hiji suku Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t dina dua suku, kalawan margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

A single 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

A aisan buleud nyaéta dua artikel dina hiji, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed sarta diteundeun tanpa pulas; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: motongan, snags, glazing, pewarnaan kimiawi, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Tugas beurat nyaéta ngawangun, teu rating a

The phrase describes the sleeve and the standard of make. A 50 t aisan téh 50 t naon leungeun baju; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the ganda leungeun baju buleud aisan — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Taya logam, euweuh tungtung, no stitching in the load path — the loop is the sling.

Awak kaku butuh rohangan

A 50 t awak teu ngabengkokkeun buleud radius kedap jalan a 10 t hiji ngalakukeun. Salaku aturan gawé, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Géométri ketang biasana dijawab ku awak leuwih panjang, a ngangkat balok pikeun mawa suku ngadeukeutan ka nangtung, atawa a aisan buleud ku panon dijieun pikeun panjang diukur.

Parameter téknis

Méja 3 — 50 t heavy duty polyester round sling, spésifikasi baku
Parameter Spésifikasi
produk 50 t heavy duty polyester lifting sling, aisan buleud sajajalan, 50,000 kg buleud ngangkat aisan
Pangwangunan Inti filamén paralel kontinyu dina leungeun baju tubular anyaman, ditutup kana loop sajajalan; euweuh logam dina jalur beban
Inti Poliéster kakuatan tinggi (PES) multifilamén, iklas paralel, waxed
leungeun baju tugas beurat anyaman poliéster-tenacity tinggi, lapisan tunggal salaku standar; leungeun baju ganda pikeun mesen
wates beban gawé 50,000 kg (50 t), suku tunggal, nangtung
Pegatna beban 350,000 kg ku a 7:1 faktor
Faktor kaamanan 7:1 sakumaha standar; faktor séjén dihasilkeun dina urutan mana pasar merlukeun
Elongation di WLL Approximately 2–3 %
Suhu jasa -40 °C nepi ka +100 °C
Panjang éféktif 1–30 m made to order; panjang minimum manglaku ka kapasitas ieu
Warna Oranyeu salaku standar; warna leungeun baju séjén pikeun mesen
Nyirian WLL sareng panjangna dicitak dina leungeun baju; labél sewn kalawan WLL, panjangna, séri, baku jeung titimangsa
Standar DI 1492-2 sarta ASME B30.9 prakték konstruksi
Nguji Buktina dimuat sateuacan kiriman; catetan test loyog jeung nomer serial
Bungkusan Coil dina kantong poli, karton dilabélan; Usuk atawa crate on pamundut
MOQ & OEM MOQ low pikeun urutan sidang; OEM dina panjangna, warna leungeun baju, serat inti, perenah labél jeung bungkusan
Diaméter awak sareng massa unit nuturkeun panjang sareng pilihan leungeun baju, sarta ditémbongkeun dina gambar dikaluarkeun kalawan cutatan. Di luhur 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Panjangna: panjangna éféktif atawa kuriling

A aisan sajajalan euweuh tungtung, so its length can be quoted two ways and the two are a factor of two apart. Ieu kasalahan urutan paling umum dina aisan buleud, jeung di 50 t éta hiji mahal pikeun ngabenerkeun sanggeus acara.

Méja 4 — The two length conventions
Dicutat salaku Anjeun nampi Dipaké pikeun
Panjang gawé éféktif Satengah kuriling - Hook handap ka beban jeung nyadangkeun Nangtung sarta choked lifts, dimana jangkungna ngagantung dipikawanoh
Kuriling Panjang loop pinuh Karanjang angkat, dimana girth tina beban drive panjangna

A 4 m panjang éféktif mangrupa 8 m gelung. On our slings the figure printed on the sleeve is the effective length, jadi print jeung cutatan salawasna satuju. Pikeun angkat karanjang, nyandak girth tina beban, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, nu sarua jeung meuli aisan leutik.

Nyirian, serial and proof-load traceability

Di luhur 10 t the colour code stops identifying the sling, jadi di 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Label sewn mawa WLL, panjangna, séri, standar jeung tanggal pabrik; serial nyaeta naon numbu aisan fisik pikeun paperwork na.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A sertipikat serat sarta inohong bets sadia on pamundut; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m awak, quoted by effective length.

Dimana a 50 t sling earns its place

At this capacity the sling is chosen for what it does henteu do to the load — a wire rope grommet carries the same figure. Bédana nyaéta kontak.

  • Girders precast jeung bagéan sasak. Hiji aisan dina unggal tungtung, girder diangkat tingkat; leungeun baju ngajaga beungeut kabentuk jeung chamfer nu.
  • Steel coils and plate packs. Karanjang handapeun pak, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformers, generator jeung ranjang mesin. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Kapal sareng blok modul. Opat-titik kalayan balok di luhur, dimana sudut aisan nyaéta variabel anu mutuskeun set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Pamariksaan, perawatan sarta pangsiun

Pariksa saméméh unggal pamakéan, sareng sacara resmi dina interval anu diperyogikeun ku rezim anjeun. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: motongan, snags, glazing, melts, pewarnaan kimiawi.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label jeung citak: upami WLL atanapi panjangna teu tiasa dibaca deui, aisan teu tiasa diverifikasi.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, panas glazing, inti nu geus Isro kaku atawa lumpy, chemical attack or a missing label.
  • Nyimpen coiled na kaluar lantai, kaluar ti beurang jeung jauh ti panas, pangleyur na spatter weld; pernah nyimpen aisan baseuh dina kantong katutup, and never drag one under load.

Remen ditanyakeun

Can one 50 t aisan angkat 100 t dina karanjang?

Di sisi alungan, enya- 100 t dina 0-7 °. Dina prakték hook, master link atanapi beam di luhur ogé kedah dipeunteun 100 t, sarta dina ukuran ieu bango biasana henteu. Éta pisan sababna naha karanjang di 50 t mangrupakeun kaputusan Pakem kahiji jeung kaputusan kapasitas kadua.

Ngalakukeun dua 50 t slings angkat 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, jeung 50 t once the legs open past 45°. A genuine 100 t beban dina dua suku perlu 75 t alungan, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: manteng low, hirup abrasion alus, −40 nepi +100 °C, lowest cost at this rating. A UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, nyokot tinggi, atawa aisan nu kudu dibawa naék tangga.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m atawa 8 m?

Sebutkeun konvénsi anu anjeun maksud. A 4 m panjang éféktif mangrupa 8 m gelung. For a vertical or choked lift the effective length is the distance from hook to load; pikeun karanjang, tambahkeun girth tina beban kana headroom jeung cutatan éta.

Naon dokuméntasi hadir kalawan aisan?

A sewn label carrying the WLL, panjang jeung serial; rékaman bukti-beban cocog jeung serial éta; sertipikat serat sarta inohong bets on pamundut. Béjakeun ka kami sateuacan pesenan upami pasar anjeun peryogi panyiri standar khusus.

Can the sleeve be replaced or repaired?

No. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Ménta a 50 t buleud aisan cutatan

Send the lift, get a drawing and a price

Beban per leg, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Panjang éféktif atawa kuriling, lingkungan, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Angkat Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Cina · Kode HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

produk patali

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Angkat aisan Rigging Company · Lifute Industrial Park, Kota Taizhou, Propinsi Jiangsu, Cina · Kode HS 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Ninggalkeun Pesen Anjeun

Gulung ka luhur