Perusahaan angkat aisan rigging ngahasilkeun jaring kargo tali nilon, jaring kargo tali kawat baja sareng jaring kargo anyaman kakuatan tinggi.
Kargo Angkat Net

A cargo lifting net turns a loose, stacked or bagged consignment into a single crane lift. The net closes around the whole load instead of choking individual pieces, and it carries that load from its corners rather than from one contact point, so cargo that cannot be repacked, banded or palletised can still be moved in one movement.
We manufacture cargo lifting nets in three woven constructions – high-tenacity nylon rope, galvanised steel wire rope and high-strength polyester webbing – across a rated capacity of 1 t ka 100 t. Bubukaan bolong, ukuran net, wates, lifting points and colour are made to your drawing, and every net is proof-load tested in our own plant before it is packed.
- Kapasitas dipeunteun: 1 t – 100 t, stated for the way the net is rigged
- Bubukaan bolong: 50 mm – 400 mm, chosen from the smallest dimension of the cargo
- Titik ngangkat: 4 reinforced corners as standard, 8 points for a spreader beam
- Faktor kaamanan: 5:1 / 6:1 / 7:1 depending on construction
- Dokuméntasi: capacity label, material test report and CE marking
- Standar: built to your nominated standard; ISO 9001 quality system
Which cargo lifting net suits your load?
Tilu konstruksi tumpang tindih dina kapasitas, so the choice is normally decided by the cargo and the working environment rather than by tonnage alone. Use the table below as a starting point, then confirm the mesh, the net size and the lifting points with our engineers.
| Cargo | Recommended construction | Usual mesh | Kapasitas has |
|---|---|---|---|
| Bagged goods – fertiliser, gandum, seed, tuang | Polyester webbing or nylon rope | 100 mm | 2 t – 10 t |
| karton Palletised, boxed goods | High-strength webbing kargo ngangkat net | 100 x 100 mm | 2 t – 10 t |
| Bata, blok, batu beulah | Nylon rope net in bag form | 100 mm – 150 mm | 2 t – 25 t |
| Quarry run, agrégat, uing demolition | Steel wire rope net | 150 mm – 300 mm | 10 t – 100 t |
| Log, kayu sawn, kutub | Nylon rope net, dicangcang | 200 mm – 300 mm | 2 t – 50 t |
| Steel plate packs, kebat pipa, bagian | Webbing net with edge protection, or wire rope net | 100 mm – 200 mm | 5 t – 50 t |
| kendang, ban, gulungan | Nylon rope net or webbing net | 100 mm – 200 mm | 1 t – 10 t |
| Machined, painted or plated parts | Webbing net only – datar, non-marking bands | 50 mm – 100 mm | 1 t – 20 t |
| Scrap metal, mixed abrasive bulk | Steel wire rope net | 200 mm – 400 mm | 10 t – 100 t |
| FIBC big bags, 1 t jeung 2 t | Jaring anyaman, or a purpose-made crane pallet kargo net | 50 mm – 100 mm | 1 t – 5 t |
What a cargo lifting net is – and what it is not
Jaring angkat kargo mangrupikeun kisi anyaman, lain kantong jeung lain selempang. Pita atawa untaian melintang di sudut katuhu pikeun ngabentuk bolong kabuka; the border and the corners carry the load; and the cargo sits inside the lattice rather than on top of it. That geometry is what makes a net useful: the load is distributed over a wide bearing face instead of being concentrated at a hook, a choke point or a fork pocket, so contact pressure drops and the surface of the cargo is left intact.
It differs from a sling in three practical ways. A net holds the cargo in three dimensions, so nothing can slide out sideways during the lift. A net can be loaded on the ground, spread flat, and only then closed around the goods, which means the goods never have to be lifted to be netted. And a net is rated as an assembly of corners, border and mesh, so its capacity is quoted for a stated rigging arrangement rather than as a single line pull.

The four elements that set the rating
The strand or the band. Tali nilon, steel wire rope or flat webbing. This single choice sets the strength, the net weight, the surface contact and the resistance to abrasion, cut and heat.
The mesh opening. The size of the square or diamond aperture. Éta mutuskeun naon anu aya di jero jaring sareng sabaraha beurat jaring. It is chosen from the smallest dimension of the cargo, pernah ti ukuran luar net – a 6 m net with a 300 mm mesh will lose bricks through the mesh no matter how strong the rope is.
wates. A doubled or reinforced edge running the full perimeter, jadi pita ujung teu bisa unroll, spread apart or pull out under load. On a webbing net the border is double-layer stitched; on a rope net it is a doubled border rope spliced into the corners.
The lifting points. Four reinforced corner loops as standard, atawa dalapan titik dimana net diangkat tina balok spreader. Load must enter the corners and the border, never the middle of a panel. Loading the middle of a net is the most common way a sound net is destroyed in service.

Cargo lifting net technical parameters
The table below puts the three constructions side by side. Values are our standard production range; anything outside it is built to drawing, and the rating that applies is the rating of the net as it is rigged, not the capacity of the crane above it.
| Parameter | Nylon rope net | Steel wire rope net | Jaring anyaman |
|---|---|---|---|
| Bahan | 100% nilon-tenacity tinggi (poliamida) multifilamén | Tali kawat baja galvanis; tahan karat 304 / 316 dina pamundut | 100% webbing poliéster-tenacity tinggi; nylon or PP on request |
| Strand / band | 8 – 24 tali mm, 3-strand diteundeun atawa 8 / 12-untaian dikepang (nepi ka 32 mm dina pamundut) | 6 x 19 for abrasion, 6 x 37 / 6 x 36WS for flexibility; 6 – 20 mm; FC or IWRC | 50 mm webbing standard; 25 / 75 / 100 mm dina pamundut |
| Bubukaan bolong | 100 – 300 mm, pasagi atawa inten | 150 – 400 mm, pasagi | 100 x 100 mm kuadrat baku; 50 – 300 mm dina pamundut |
| Bareng / lock | Netmaker’s knot, or knotless braided splice | Pressed aluminium ferrule at every intersection | Woven band crossings, stitched at the border |
| wates | Tali wates ganda, spliced into the corners | Tali wates kontinyu, ferrule-dikonci kana bolong | Double-layer stitched border round the full perimeter |
| Titik ngangkat | 4 panon juru; 8-titik dina pamundut | Dipencét panon juru ku thimbles, or rings / Tumbu master | 4 reinforced corner loops; 8-titik jeung ring fittings on pamundut |
| Kapasitas dipeunteun | 1 t – 50 t | 2 t – 100 t | 2 t – 10 t standar; heavier to order |
| Faktor kaamanan | 5:1 / 6:1 / 7:1 | 4:1 / 5:1 / 6:1 | 7:1 |
| Elongation | kira-kira. 18 – 22% dina istirahat – absorbs shock load | Handap pisan – the mesh keeps its shape under steady load | Lemah, kira-kira. 7% dina wates beban kerja |
| Abrasion sarta motong | Alus; a single damaged strand can be replaced locally | Pangluhurna ti tilu | Alus, tapi kudu diteundeun kaluar edges seukeut |
| Korosi | Rot-bukti; suited to wet and salt-water duty | Galvanised as standard; stainless for marine and chemical service | Poliéster tanpa karat, UV stabilisasi |
| Suhu gawé | -40 C ka +80 C | Hot and dirty service – mastikeun tugas kalawan kami | -40 C ka +100 C |
| Warna | Bodas, or dyed to order | Galvanis / stainless finish | Orange high-visibility, biru, hideung, héjo atawa adat |
| Sertifikasi | CE, GS, ISO 9001; test report per net | CE, ISO 9001; CNAS and DNV certified facility | CE, GS, ISO 9001; test report per net |
Net size and rated capacity
Standard sizes are listed below. ranjang treuk, wadahna, hold and spreader dimensions are made to drawing, and the capacity quoted is the capacity of the finished net, tested before dispatch.
| Ukuran net (L x W) | Kapasitas has | pamakéan has |
|---|---|---|
| 2.0 x 2.0 m | 1 t – 3 t | kendang, bagian mesin, komponén leutik |
| 2.5 x 2.5 m | 2 t – 5 t | Palletised jeung kargo kantong, loading wadahna |
| 2.5 x 6.0 m | 4 t – 10 t | Kargo panjang, kebat pipa, treuk jeung trailer loading |
| 4 x 4 ft (1.2 x 1.2 m) | 2 t – 3 t | beban leutik, kendang, bagian mesin (pasar kaisar) |
| 82 x 82 di | 2 t – 5 t | Sidik palet standar di pasar kaisar |
| 6.0 x 6.0 m | 10 t – 25 t | Kargo kantong bulk, kayu, besi tua |
| 8.0 x 8.0 m | 25 t – 50 t | bulk beurat, batu, gawé quarry jeung demolition |
| Diwangun pikeun ngagambar | 1 t – 100 t | ranjang treuk, wadahna, nahan sarta spreader beam dimensi |
Bubukaan bolong: choose it from the smallest dimension of the cargo
Mesh is the parameter buyers most often get wrong, because it is chosen from the net size instead of from the load. The rule we apply is simple: the aperture must be smaller than the smallest dimension of the smallest piece that must not escape. The table below is the guide we use on quotation.
| Smallest cargo dimension | Cargo example | Mesh to specify |
|---|---|---|
| Sahandapeun 50 mm | Bottles, small castings, nuts and bolts, components in bulk | 50 mm – closed or near-closed bag form |
| 50 – 100 mm | Bata, bagged fertiliser, boxed goods, FIBC big bags | 100 mm |
| 100 – 200 mm | kendang, karton, batu beulah, kayu sawn | 150 – 200 mm |
| Leuwih 200 mm | Blok, log, besi tua, uing demolition | 250 – 300 mm, atawa 400 mm in wire rope |
Lifting configuration and how the rating is stated
A cargo lifting net is rated as an assembly. The same net gives a different rating for a four-point vertical lift, a two-point lift and an eight-point lift from a spreader beam, because the number of load-bearing corners changes. Every net we supply is therefore labelled with its working load limit and, where a net is used in more than one arrangement, each arrangement is listed separately on the label. Quote the configuration you will actually use when you enquire – a rating copied from a catalogue without the configuration is not a rating.
Nylon rope cargo lifting net
A jaring angkat kargo nilon is knotted or braided from high-tenacity nylon rope. Each strand can move slightly inside its knot, so the net settles around an irregular stack instead of sitting on top of it, sarta elongation tinggi nilon urang nyerep shock nalika bango nyokot up slack nu. It is the usual choice for timber and logs, batu, kendang, ban, scrap and any load whose shape shifts as it is lifted.
Rope is also the most repairable construction: a damaged strand can be re-knotted or re-spliced locally and the net re-inspected, which matters on a site where a net is working daily. For polypropylene rope in the same construction, ningali ka polypropylene rope cargo net sling.

Steel wire rope cargo lifting net
A steel wire rope cargo lifting net is cross-woven from galvanised wire rope and locked at every intersection with a pressed aluminium ferrule, so the mesh cannot open up or distort when the net is dragged across a quay or a truck bed. Wire rope is the construction for abrasion, edges seukeut, hot surfaces and long service with little maintenance – quarry run, agrégat, uing demolition, scrap and heavy bulk.
It is the heaviest of the three and the least forgiving to finished surfaces, so it is normally specified where the cargo is rough. Where a wire rope net has to handle dressed material, we supply the same construction with sheathed contact sections, using the rope from our tali kawat tali rentang.

High-strength webbing cargo lifting net
A high-strength webbing cargo lifting net is woven from flat polyester webbing. Pita melintang dina sudut katuhu pikeun ngabentuk bolong pasagi kabuka, the border and corners take the load, sarta sakabeh net cukup lemes keur diuk ngalawan bagged, dikotak-kotak, kargo dicét atanapi machined tanpa nyirian eta. Ieu mawa beungeut bearing widest tina tilu constructions dina beurat net panghandapna, which is why it is the default for palletised, bagged and unitised cargo in ports, on trucks and on site cranes.
Poliéster ngagaduhan elongasi anu rendah, so the mesh keeps its shape while the crane takes up the slack and the load stays square. Webbing ieu anyaman dina ngagiling urang sorangan, which is why band width, warna, mesh and capacity can be tuned to the load instead of bought in from a catalogue. It is the same webbing used in our anyaman aisan jeung slings buleud sajajalan, so a net and a sling on the same lift are matched in elongation and colour coding.


Kumaha jaring angkat kargo rigged
- Four-point lift from a single hook. Opat puteran sudut dikumpulkeun kana hook atanapi cingcin master, so the net closes around the cargo as the crane takes up. This is the standard arrangement for bagged, palletised and unitised loads.
- Eight-point lift from a spreader beam. Jaring tetep pasagi sareng beban tetep tingkat, nu peryogi konsinyasi panjang atanapi lebar. Urang ngangkat spreader beam takes the eight points and keeps the legs vertical.
- Bentuk kantong. A closed three-dimensional net for loose goods that must not escape – bata, batu beulah, bottles, small castings.
- Flat net, cargo inside the mesh. For palletised, bundled or unitised loads that only have to be held together during the transfer.
Naon waé susunanana, load must go into the corners and the border. Three habits destroy nets faster than any cargo: loading the middle of a panel, nyered jaring ka gigir ku bango, and lifting on fewer than the full set of lifting points.
Naon urang kudu cutatan jaring angkat kargo
| Émbaran | Naha éta penting |
|---|---|
| Beban beurat sareng bentuk beban | Nyetél kapasitas anu dipeunteun sareng jumlah untaian anu nanggung beban atanapi pita handapeun kargo |
| Panjang net x lebar | Jaringna kedah langkung ageung tibatan tapak beban supados kargo aya di jero bolong, teu di luhur eta |
| Bubukaan bolong | 100 x 100 mm is our webbing standard; smaller or loose items need a smaller aperture |
| Strand diameter or band width | Sets strength and net weight; band width also sets the bearing face on the cargo |
| Titik ngangkat | Four corners as standard, or eight points and rings for a spreader beam |
| bango, hook atanapi spreader | Determines whether the corners carry eyes, cingcin, shackles or thimbles |
| Lingkungan | UV, cai uyah, lepas pantai atawa tugas-suhu luhur mutuskeun bahan jeung perlakuan |
| Dokuméntasi | nyirian CE, laporan tés, declaration of conformity or own-brand labels |
Pamariksaan: what to check and when to retire a net
Inspect before every lift and record a formal inspection at the interval your site requires. Check the corner loops and the corner stitching first – that is where wear starts – then work round the border and the mesh.
| Check | Retire the net if |
|---|---|
| Corner loops and corner stitching | Stitching is broken, the loop is deformed, or the ring / thimble is cracked or worn |
| wates | The border rope or border band is cut, unravelled or pulled out of the mesh |
| Strands or bands | Any load-bearing strand or band is cut, deeply abraded, heat-glazed or chemically stained |
| Knots and ferrules | A knot has slipped, or a ferrule is cracked, displaced or corroded through |
| Anyaman | Bands are cut, powdered by UV, or contaminated with oil, paint or chemicals that cannot be removed |
| Labels | The capacity label is missing or illegible – an unlabelled net cannot be rated |
Pernah ngalereskeun jaring ku knotting untaian rusak, las tali kawat atawa pemanasan band a. Repairs belong to the maker or to a competent person using the original materials, followed by a re-test where the standard requires it. Store nets clean, dry and off the ground, kaluar tina panonpoé langsung.
Where cargo lifting nets are used
| Sektor | Naon jaring |
|---|---|
| Palabuhan jeung terminal | Wadah isina jeung de-isi, kargo palletised jeung kantong, quay and hold work with a net that is soft, karat-gratis jeung gampang ngalipet |
| Baja jeung fabrikasi | Plate packs, buntelan, bagian machined jeung beban stillage mana beungeut kudu teu ditandaan |
| Batu, quarry jeung agrégat | Batu beulah, blok, cobbles jeung bulk abrasive; wire rope where cut resistance decides the service life |
| Kayu jeung hasil leuweung | Log, sawn packs and poles – a rope net settles around an irregular stack as it is lifted |
| Lepas pantai sareng laut | Deck and over-the-side transfer; nylon and polyester drain freely and do not rust |
| Tatanén jeung kantong bulk | Pupuk, gandum, siki jeung eupan dina kantong jeung kantong badag, lifted whole without repacking |
| Daur ulang jeung besi tua | Campuran sareng abrasive scrap, dimana jaring tali kawat langkung lami tibatan tékstil |
| Vehicle and plant loading | RoRo and breakbulk loading, where a wide net spreads the load across the body and chassis; tingali urang jaring angkat kandaraan rentang |
Two neighbouring ranges are often quoted with a lifting net: heavy duty truck cargo nets jeung container cargo nets for securing rather than lifting, jeung jaring tali kaamanan where the net protects people instead of holding cargo. Tell us which duty applies and we will confirm the construction – a securing net is not rated for lifting, and a lifting net is not a fall-arrest product.
Patarosan anu sering ditaroskeun
What is the difference between a cargo lifting net and a cargo net?
A cargo net is a general term that covers lashing, securing and climbing nets as well as lifting nets. A cargo lifting net is a rated assembly: it is designed for a stated working load limit, diuji, labelled and supplied with documentation. If a net has no capacity label, treat it as a securing net and never lift with it.
How do I choose between nylon rope, wire rope and webbing?
Kasar, titik bulk panas atawa abrasive kana tali kawat baja. Cargo that must not be marked points to webbing. Irregular loads that have to settle into the net, jeung gawe dek baseuh, nunjuk kana tali nilon. Where two of those apply at once, tell us and we will recommend the construction with the trade-off made explicit.
What safety factor should I specify?
Our standard ranges are 5:1, 6:1 jeung 7:1 for rope and webbing nets and 4:1 ka 6:1 for wire rope nets. The factor must satisfy the standard your site works to, so confirm it at enquiry rather than assuming the lowest option is acceptable.
Can a cargo lifting net be made to my size and mesh?
Sumuhun. Ukuran, bolong, strand diameter or band width, jumlah titik ngangkat, warna sareng kapasitas sadayana didamel pikeun pesenan, kaasup ranjang treuk, wadahna, nahan jeung ukuran spreader. Send a drawing or the internal dimensions of the space the net has to work in.
Will the net hold loose material such as bricks or split stone?
Sumuhun, in bag form with the correct mesh. The aperture must be smaller than the smallest piece, and the net must be closed on all sides. Where material is very fine or very sharp, we will normally propose a smaller mesh in a heavier construction.
Can the net be used in a marine or offshore environment?
Sumuhun. Polyester and nylon nets are UV stabilised and rust-free, jaring tali kawat bisa disadiakeun galvanized atanapi di stainless steel, sareng sadaya tilu solokan bebas dina dek. For offshore duty, tell us the salt-spray exposure and the inspection regime so the material and coating are matched to it.
Is a test certificate supplied with each net?
Sumuhun. Each net leaves the plant with a capacity label and a material test report, sarta fasilitas urang nyepeng CNAS, CE jeung ISO 9001 sertifikasi. Label merek sorangan, printed markings and declarations of conformity are available on OEM orders.
Naon kuantitas pesenan minimum?
There is no fixed minimum for standard constructions – a single net for a trial is possible, and batch quantities can combine mixed sizes and mixed constructions in one order. Mixed pallets are also acceptable where the export packing allows it.
How is a cargo lifting net packed for export?
Folded and strapped with the label and test report attached, lajeng kantong atawa peti dipak sakumaha sapuk. Export packing is built to survive sea freight, and nets can be supplied with a repair kit and a spare corner loop where the customer maintains its own fleet.
Can you print our logo or brand on the net?
Sumuhun. We weave and print webbing in house, so brand names, capacity text, fleet numbers and colour coding can be incorporated in the net rather than added as a tag. Send the artwork with the enquiry.
Why buy cargo lifting nets from Lift Sling Rigging Company
- 40 taun produksi alat-alat angkat – founded in 1985 di Taizhou, Jiangsu, kalawan leuwih ti 200 employees and one of China’s largest sling and net production bases.
- We weave our own webbing and make our own rope nets – lebar band, warna, bolong jeung kapasitas aya dina kontrol urang, so a net is tuned to the load instead of being bought in from a catalogue.
- Laboratorium tés sorangan sareng a 1000 t mesin uji horizontal – breaking load is tested per net and documented; the facility holds CNAS, CE and DNV certification and 15 patén-patén otorisasi.
- Hiji supplier pikeun sakabeh rentang kargo – jaring angkat kargo, anyaman aisan, slings buleud, tali kawat tali, spreader beams, tali nilon, kabel narik kaos kaki and safety nets.
- OEM jeung ODM – labél sorangan-brand, webbing dicitak, kelir custom sarta packing ékspor pikeun distributor jeung pamaké tungtung.

Nyuhunkeun kutipan net angkat kargo
Send the load weight and shape, ukuran net, bubuka bolong, the lifting points and the environment – or a drawing of the truck bed, wadahna atawa nahan jaring kudu pas. Insinyur kami bakal mastikeun konstruksi, kapasitas dipeunteun, the strand or band size and the packing, and quote in one reply. Pikeun ngobrolkeun heula, ngahubungan insinyur urang; urang certification and test records sadia on pamundut.
Angkat aisan Rigging Company
Lifute Industrial Park, Kota Taizhou, Propinsi Jiangsu, Cina
Tel: +86 523 8693 5818 | WhatsApp: +86 180 6600 2268 | Surélék: lift98@jslift.com
Kode HS: 630790


