Lift sling rigging company produce One Way Single Ply Endless Polyester Flat Lifting Webbing Sling,dharbaaxo siman oo aan dhammaad lahayn,Endless 1Ply Flat Sling,One Way Endless Webbing Sling Single Eye For Lifting Steel Pipe And Tubing,1 Ply Flat PES Webbing Sling,.
One Way Single Ply Endless Polyester Flat Lifting Webbing Sling
A one way single ply endless polyester flat lifting webbing sling is a closed loop of flat woven polyester webbing – one ply, joined to itself, with no eye, no end and no fitting anywhere on the article. It is bought for one journey and supplied with the load rather than drawn from a sling store. Heerka caadiga ah: 1 t ku 12 t working load limit on 4 mm webbing, ballacyada 25 mm ku 300 mm iyo a 5:1, 6:1 ama 7:1 arrin, loop lengths 0.5 m ku 100 m, colour coded to BS EN 1492-1 and supplied with a blue label stating the working load limit, dhererka, the factor and the batch.
Why a Loop Suits a One-Trip Band
The two halves of this name answer two different questions. One way is commercial: the band travels with the pack, is used once, and is not recovered or re-issued. aan dhamaad lahayn is structural: the band is joined to itself, so there is nothing to thread and nothing to align.
Put together, they answer what actually goes wrong at the far end of a consignment: the person re-slinging the load has no rigging plan, no sling store and no second choice, and a loop asks nothing of them.
- Nothing to align. An eye has to meet a hook of the right size the right way round. A loop is dropped over the load or passed round it, and the pick works whichever way it lands.
- Nothing to bruise a finish. No stitching stack at the bearing point, no thimble, no shackle in contact with the load. On coated pipe, anodised section or polished sheet that is the whole protection.
- Nothing to lose. A band with fittings can arrive with the fittings gone. A loop is one piece of webbing and it is either there or it is not.
- Nothing to get wrong on length. The one exception on this list, and it is the one that matters most – see the section on length below, because a loop is quoted two ways and they differ by nearly a factor of two.
Tilmaamaha
| Halbeegga | Ikhtiyaarada |
|---|---|
| Alaabta | One way single ply endless polyester flat lifting webbing sling / dharbaaxo siman oo aan dhammaad lahayn |
| Foomka | Closed loop, flat woven, joined to itself; no eye, ku habboonayn dhammaadka lahayn |
| Dhis | Maro kali ah – one layer of webbing forms the whole loop |
| Fiber | Polyester adkeysi sare leh (PES); nylon and polypropylene available for specific duties |
| Web thickness | 4 heerka mm |
| Xadka culeyska shaqada | 1 t – 12 t, hal baalle |
| Ballaca band | 25 mm – 300 mm, set by the working load limit and the factor |
| Qodobka badbaadada | 5:1 / 6:1 / 7:1, selected at order |
| Loop length | 0.5 m – 100 m, minimum rising with the width |
| Midabka | BS EN 1492-1 capacity colour; special colours and printed logos on OEM orders |
| Summada | Blue label: xadka culeyska shaqada, dhererka, arrin badbaado, lambarka dufcada |
| Nolosha adeegga | One journey – aan ka bogsan, dib looma soo saarin |
| HS code | 630790 |
Cabbirka: Width Follows the Figure and the Factor
Width is not a free choice: it follows from the working load limit and from the factor, which is why the same tonnage appears three times below with three widths. A 7:1 band is wider and heavier than a 5:1 band of the same figure – that is the cost of the extra factor, not a different grade of webbing.
| WLL | 5:1 | 6:1 | 7:1 | Min. loop | kg/m iyo 7:1 |
|---|---|---|---|---|---|
| 1 t | 25 mm | 25 mm | 30 mm | 0.5 m | 0.20 |
| 2 t | 50 mm | 50 mm | 60 mm | 1.0 m | 0.60 |
| 3 t | 75 mm | 75 mm | 90 mm | 1.0 m | 0.78 |
| 4 t | 100 mm | 100 mm | 120 mm | 1.5 m | 0.90 |
| 5 t | 125 mm | 125 mm | 150 mm | 1.5 m | 1.14 |
| 6 t | 150 mm | 150 mm | 180 mm | 1.5 m | 1.33 |
| 8 t | 200 mm | 200 mm | 240 mm | 2.0 m | 1.85 |
| 10 t | 250 mm | 250 mm | 300 mm | 2.0 m | 2.05 |
| 12 t | 300 mm | 300 mm | 300 mm | 2.0 m | 2.70 |
The same width ladder, in the looped-end form, is published on the dharbaaxo kor u qaadaya hal isticmaal bogga – useful when a consignment needs eyes at the top and a loop at the bottom, which is two articles rather than one.
Maximum length is 100 m in one continuous loop. Longer lengths, ballacyada dhexe, extra-wide loops and special colours are made to order. Nothing in the table is a stock size: the figure, qodobka, the width and the length together describe a band made to your line.
Two readings catch buyers out. The minimum length follows the width, ma aha tan: 25 mm qaadata 0.5 m, 50 iyo 75 mm qaado 1.0 m, 100 ku 150 mm qaado 1.5 m iyo 200 mm iyo wixii ka sareeya qaado 2.0 m. Rabitaanka koox ballaaran oo dusha jilicsan macnaheedu waa aqbalida ugu yaraan dheer, which in a short pack is the line that decides the order. Iyo weight column is a handling figure: at the top of the ladder a hundred metres of 300 mm band is over a quarter of a tonne, and the bands travel as cargo before they lift anything.
Dhererka: the Two Conventions, and Why It Matters More Here
A loop has no ends to measure between, so this trade quotes the same article two ways: ah wareega of the loop, iyo length of the band laid flat. For the same sling the two figures differ by about a factor of two. Both are legitimate; only one of them is the figure you meant.
On a reusable sling the mistake shows up at the next lift and is corrected from the store. On a one-way band it shows up at the far end, in front of a customer, with no second band to swap in – which is why this is the single line worth getting right on the enquiry. State the convention with the figure, or state the use instead (the girth of the article the loop must go round), and the ambiguity disappears before the band is cut.
| You write | It means | When to use it |
|---|---|---|
| Loop circumference 4.0 m | One full turn round the load, measured round the closed loop | The band is ordered to wrap a known girth |
| Band length 2.0 m, laid flat | The webbing cut length before joining, wareegga badhkii | The band is priced and cut by the metre |
| Girth at the pick 1.6 m, two picks | The dimension of the load itself, and the number of bands | The safest form on a first order: it needs no convention at all |
The Three Hitches, and What Each One Carries
The same loop works in three arrangements, and the figure on the label only describes the first of them. This is the most common error on an endless band, because all three are rigged without any change to the article.
| Habaynta | Qodob | A 5 t loop gives |
|---|---|---|
| Toosan – loop hangs, load on one side | 1.0 | 5.0 t |
| Ku ceejisay – round the load and back through itself | 0.8 | 4.0 t |
| Basket, legs 0-45° | 2.0 | 10.0 t |
| Basket, legs 45-60° | 1.4 | 7.0 t |
The choke is the arrangement a loop is bought for – it is what grips a pipe, a pole or a drum – and it is also the one that costs 20 % of the figure. Markaa a 4.5 t pipe bundle choked on a 5 t loop is an overload, not a margin, and the answer is the next width up rather than a longer band. Where the loop is used as a basket under a bundle, both sides carry and the figure doubles; where it is used vertically, the label figure applies as printed.
One Way Is a Commercial Life, Not a Lower Grade
The word describes the journey, and nothing else: fiber-ka, tidnaansho, ballac ahaan, arrin, working load limit and marking are specified exactly as for a band used for years, and buying a narrower band or a lower factor because it is only going one way is not a saving – waa xad aan la qiimayn oo wiishka laga saaray. What does change is the record. On a reusable sling the inspection history is the evidence; on a single-trip band there is no history after the lift, sidaas the print on the band and the packing list carry the whole traceability. The returnable version of the same loop, inspected between lifts and drawn from a store, is the dharbaaxo siman oo aan dhammaad lahayn.
- Marking is part of the specification, not the paperwork. Xadka culeyska shaqada, dhererka, arrin, and the reference the despatch actually uses – a pack number, an order number, your own part number. That reference is what ties a band on a quay to a line on a packing list in an office.
- Legible after the journey, not after production. The figures have to survive a lorry, weel iyo meel wax lagu raro. Daabac yar, low-contrast, or on a face that enters the choke is print that will not be read.
- Midab ahaan kanaalka labaad. Hal midab nooc baakidhkiiba, Macmiil kasta ama tan tan ayaa weel ka mid ah xadhkaha isku midka ah u rogaa shay la sooci karo, and on a made-to-order band it costs nothing.
Counting: One Band per Pick Point, per Pack
One-trip bands are bought in the same arithmetic as the packing, and it is done once because nothing comes back. Tiri xirmada, aan ka iman tan: two picks per pack is two bands, wiish afar dhibcood leh waa afar, and ninety packs at two picks is 180 kooxaha. Ku dar gunnada maaraynta si ulakac ah – two to five per cent covers the band cut on a sheet edge while the pack is made up – so a shortfall becomes a line on the order instead of a delay at the dock. Where the bands are packed inside a crate, ku xidhxidhan meel fadhiid ah ama lagu duubay xidhmo, the sling becomes a line on the bill of materials: lambarka qayb, a loop length, a colour and a print that does not change between shipments.
Where a One-Trip Loop Is the Right Order
| raran | What decides the band | Usual build |
|---|---|---|
| Dhuumaha birta dahaarka leh, kala goysyada | Band width is the coating’s only protection from the band doing the lift; measure the two pick positions from an end | 100-150 mm, 4-6 t, 7:1 |
| Dhuumaha ama tuubada xirmooyinka | Xirmadu waa culayska; boos kastaa wuxuu sitaa qaybtiisa xirmada oo dhan, and the girth sets the loop | 150-200 mm, 6-8 t, 7:1 |
| Steel sheet and plate stacks | Cidhifka go'an waa daab ka soo horjeeda xadhig tolan, so the height of the stack and the direction of the band both matter | 100-150 mm, 4-6 t, 7:1 |
| Alwaaxdii, logs and packs | The arris prints a line into dressed stock and cuts the weave on a narrow band | 125-200 mm, 5-8 t, 7:1 |
| Coils, qaybaha dhagaxa iyo wareega | A closed loop is the natural form; the choke grips and the width spreads the pressure | 150-300 mm, 6-12 t, 7:1 |
| Machinery and finished assemblies | Nothing metallic touches the load at either end, which on a painted or ground surface is the reason to buy it | 50-125 mm, 2-5 t, 7:1 |
The Single Inspection, and What It Looks At
A one-trip band has one inspection in its life and it happens before the load, marka qaladka weli la bedeli karo shixnad isku mid ah. Afar shay ayaa la eegayaa, siday u kala horreeyaan: the weave where it meets the load (goyn, naaxid, a glazed or pinched face), the join where the loop closes, the label – because an unreadable figure cannot be matched to the pack it was cut for – and what the band has been lying in. Grit, raxan, saliid iyo biyaha taagan waxay u safraan xiriirka, and a clean band is the cheapest protection on the list.
Ka ilaali geesaha fiiqan, hot surfaces and welding spatter with a sleeve or a padded protector, never shorten a sling with a knot, never join two slings by knotting them, oo waligaa ha ku dayactirin mareegaha tolitaanka, alxanka ama kuleylinta. At the destination the band is disposed of, aan la kaydin: a one-trip band that comes home to a rack gets issued again, and its marking then states something that is no longer true.
Su'aalaha Inta Badan La Isweydiiyo
What is a one way single ply endless polyester webbing sling?
A closed loop of flat woven polyester webbing, one ply thick, joined to itself with no eye, no end and no fitting. It is bought for one journey, supplied with the load and not recovered. The standard range runs 1 t ku 12 t on 4 mm webbing, 25 mm ku 300 ballac mm, with loop lengths from 0.5 m ku 100 m.
How is the length of an endless sling loop measured?
Two ways, and they differ by about a factor of two: the circumference of the closed loop, and the length of the band laid flat before joining. Magaca heshiiska, or name the girth of the load instead – that is the form that leaves nothing to interpret.
Is a one-trip endless band weaker than a reusable one?
Maya. Width follows the working load limit and the factor in exactly the same way, iyo jaantusyada ku daabacan guutada waa tirooyinka khuseeya wiishka. What changes is that the band is not recovered, so the print and the packing list carry the whole record of it.
Which safety factor should I order – 5:1, 6:1 ama 7:1?
7:1 is the design factor used for general-purpose flat woven webbing slings under European practice and is the usual choice with colour coded bands under BS EN 1492-1. 5:1 is the customary North American figure for synthetic webbing slings and 6:1 dhex fadhiisata. The same tonnage at a different factor is a different article with a different width, so the factor has to be on the enquiry.
Can an endless webbing loop be used in a choker hitch?
Haa, and it is what a loop is best at – it is how a pipe, a pole or a drum is gripped. Shaxda la xiiqay waa 0.8 of the vertical figure, sidaas a 5 t loop chokes 4 t. Select the width for the arrangement you will really use, not for the vertical figure on the label.
Single ply or double ply endless sling?
Single ply is the lighter, more flexible and more economical build, and it is the right answer for most lifts up to 12 t and for anything that has to be threaded through a tight space or wrapped round a small diameter. Double ply buys a higher figure at the same width, or a stiffer, wider bearing face – at more weight and more cost per band.
Can the band be printed with our own reference or packed with our product?
Yes to both, and they are usually ordered together. Xadka culeyska shaqada, the loop length and your own pack, order or part number can be printed as a production instruction, in the exact string and case you send; the bands can be packed inside a crate, ku xidhxidhan meel fadhiid ah ama lagu duubay xidhmo, labelled per pack and listed on the packing list with the reference that matches the print.
Codso Xigasho
Send the pack and its travelling mass, the pick points and their spacing, habaynta, the girth at each pick, the safety factor your market works to, and the reference to print. We come back with the width, dhererka loop, the finished weight and the marking – on a drawing, before the band is cut.
Send your loop specification for a quotation
Taleefanka / WeChat: +86 180 6600 2268 | E-mailka: 702461526@qq.com
Cinwaanka: Beerta Warshadaha ee Lifute, Magaalada Taizhou, Gobolka Jiangsu, Shiinaha | HS code: 630790