Zogulitsa Magulu

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

Kufotokozera Kwachidule:

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way endless sling, diso limodzi, for steel pipe and tube: 25-300 poliyesitala mm, 1-24 t WLL, choke factor 0.8. WLL ndi kutalika kwasindikizidwa pa bandi.

Tsatanetsatane wa Zamalonda

Lift sling rigging company produce One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing,steel pipe lifting sling,One Way Endless Slings Solutions for Export Packaging and Heavy Industrial Lifting,Eye and Eye Sling with Webbing Eyes for Secure Lifting.

One-way sling · single eye · steel pipe and tube

One Way Endless Lifting Slings Single Eye For Lifting Steel Pipe And Tubing

A closed loop with one eye, bought for one journey: the choke grips the pipe by its own tension and the sling ships out with the consignment.

1-24 t Mtengo WLL 25- 300 mm band wide 0.8 choke factor ±2 % length tolerance
one way endless lifting slings single eye carrying a steel pipe under a crane hook

This is the one-way build of the endless sling: the same closed loop that is thrown round a bundle, made in the single-eye form so that the tail can be passed back through the eye and pulled down into a choke. It is bought with the consignment rather than drawn from a lifting store, it grips the pipe by its own tension, and it is cut off at the far end instead of being recovered. Sizes run from 25 mm kuti 300 mm kusaka, 1 t kuti 24 t working load limit and 0.5 m kuti 100 m of band, at a factor of 5:1, 6:1 kapena 7:1.

Yankho lofulumira: a single-eye endless sling is a choker. One eye means the band can be passed round the pipe and back through itself, which is the cheapest way to grip a round, slippery or coated load — and the grip increases with the load instead of depending on friction alone.

What the three words decide

The name carries three separate decisions and they are worth separating, because buyers often use the words interchangeably and then order the wrong article. Mbali Imodzi says what happens after the lift. Zosatha says the shape of the band. Diso limodzi says how the sling meets the load. Only the third one changes the lift itself.

Table 1 — The three words, and what each one actually decides
Mawu Zomwe zimasankha What it does not change
Mbali Imodzi The sling travels with the load and is not recovered; kuyendera kumodzi, pa nkhani; bought and counted in quantities The weave, chinthu, the proof test or the marking — all identical to a returnable sling
Zosatha The band is closed into a loop with no free ends, so it can be wrapped round a section and closed on itself Whether the article is reused; endless slings are made in both builds
Diso limodzi A choke. Mchira umadutsa mozungulira katundu ndikubwerera m'diso, and the noose closes as the hook takes up The vertical rating printed on the band — the choke derates it to 0.8

Read together, the phrase describes one article: a closed-loop polyester sling, finished with a single eye, issued for one pipe or tube consignment. Where the consignment is lifted and then re-slung at the far end, the same band is often supplied in the two-eye looped end single use lifting sling form instead, because the receiving site can then hang it without threading a choke.

Why a choke is the right grip for pipe

A pipe is the worst case for a sling that relies on friction: it is round, it rolls, the wall is thin at the contact line and the coating is softer than the steel under it. A choke answers all four problems at once.

  • The grip is generated, not borrowed. The noose closes as the load comes on, so the band tightens round the pipe in proportion to the weight it is carrying; a vertical sling on a bare pipe has only friction and balance holding it.
  • One contact line, chosen by you. The band bears on a single line of the wall. Set that line where the pipe is strongest — behind the end collar, away from a weld seam — and the load is carried where you put it.
  • Palibe chitsulo chomwe chimakhudza chitoliro. There are no hooks, shackles or buckles on the article, so a coated or painted pipe is not scratched at the sling point.
  • The sling stays where it was fitted. On a one-way build the choke is made at loading and left closed, so the receiving site lifts the bundle with the same sling it arrived in, without a rigger and without a plan.
choker eye closing on a bundle of steel tubing in a warehouse
The choke closing on a tube bundle. Diso limodzi, mchira umodzi, one journey — the sling stays on the load and ships out with it.

The trade-off is length: a choke consumes reach, because the tail has to come back through the eye and lie alongside the standing part. That is why a one-way pipe sling is ordered by the girth of the bundle rather than by the height of the hook, and why the length arithmetic further down this page starts from the circumference.

Kufotokozera

Four lines on the order decide the price — width, chinthu, length and marking — because the eye is formed from the same band and adds nothing to the cost but a stitch pattern.

Table 2 — Single-eye endless one-way sling, muyezo
Parameter Standard kumanga Zolemba
Webbing Flat woven high-tenacity polyester, 25-300 mm m'lifupi 4 mm kapena 7.5 mm gulu; one to three plies at the heavy end
Malire olemetsa ogwira ntchito 1 t - 24 t pa gulaye Oima, single leg — the figure printed on the band
Chojambula chojambula 5:1 / 6:1 / 7:1 The same WLL needs a wider band at 7:1 pa 5:1
Fomu Closed loop with one formed eye Eye stitched and bar-tacked at the mouth
Utali 0.5 m - 100 m of band Quoted as band length; the choke takes up reach
Eye clear length 250 mm ndi 1 t kuti 650 mm ndi 15 t Sized to the hook bowl or pin, plus about 10 mm
Mtundu Kuyitanitsa; MU 1492-1 code up to 10 t Usually matched to the goods it travels with
Kutentha −40 °C mpaka +100 °C Polyester; attacked by concentrated acids
Kuyika chizindikiro WLL, kutalika, fiber, batch and your reference Printed on the band and repeated on a sewn label
Kulongedza Chophimbidwa, banded in bales or cartoned Can be packed into the crate or container with the goods
HS kodi 630790 Packing list line, not a lifting register entry

The size ladder: WLL, width and factor

The factor is a market decision as much as an engineering one: momwemonso 5 t sling ndi 125 mm ndi 5:1, 250 mm ndi 6:1 ndi 150 mm ndi 7:1 pa a 4 mm gulu. Tell us the factor your market expects and the width follows from the ladder below.

Table 3 — Width against working load limit (4 mm gulu)
WLL Pa 5:1 Pa 6:1 Pa 7:1 Kutalika kochepa
1 t 25 mm 50 mm 30 mm 0.5 m
2 t 50 mm 100 mm 60 mm 1.0 m
3 t 75 mm 150 mm 90 mm 1.0 m
5 t 125 mm 250 mm 150 mm 1.5 m
8 t 200 mm 200 mm 240 mm 2.0 m
10 t 250 mm 250 mm 300 mm 2.0 m

Widths as published on our single use slings ladder; the full range continues in double ply to 24 t. Where a row shows the same width at two factors, that is the current ladder quoted as it stands.

What a choke does to the figure on the band

The number printed on the band is the vertical, mlingo wa mwendo umodzi. A choker costs a fifth of it, and that is not a safety margin — it is the capacity. Decide the arrangement before the tonnage, then buy the sling that carries the load in that arrangement.

Table 4 — Capacity by hitch (worked for a 5 t gula)
Kukonzekera Factor Kuthekera kwa a 5 t gula
Oima, mwendo umodzi × 1.0 5,000 kg
Choked — the form on this page × 0.8 4,000 kg
Basket, two parts at 0–45° × 2.0 10,000 kg
Basket, two parts at 45–60° × 1.4 7,000 kg
Two-leg assembly at 0–45° × 1.4 7,000 kg per pair
Two-leg assembly at 45–60° × 1.0 5,000 kg per pair
Three or four legs at 0–45° × 2.1 10,500 kg set
Three or four legs at 45–60° × 1.5 7,500 kg set

A worked case from a pipe yard: a 9.6 t bundle of 508 mm chubu, lifted on four chokes. Each sling carries 9,600 ÷ 4 = 2,400 kg, and because the hitch is a choke the rating has to be 2,400 ÷ 0.8 = 3,000 kg. A 3 t band at the factor your market uses is the answer — not a 2.4 t chimodzi, which is the figure that comes out if the choke derate is forgotten. On two chokes the same bundle needs 6 t bands.

Utali: from the pipe circumference to the band you order

A choke is ordered by the girth of the load, not by the height of the hook. Measure the bundle — for a single pipe, π × outside diameter; for a square or rectangular pack, twice the width plus twice the height — then add what the choke itself consumes. In quotation we use:

Band length ≈ girth + eye and tail allowance + handling allowance, where the eye and tail allowance is about 0.3 m, and the handling allowance is 0.3–0.5 m for the tail to come back through the eye and lie alongside the standing part. Round up to the next half metre. The finished length is confirmed against your drawing before the bands are cut; the tolerance on a sewn article is ±2 %.

Table 5 — Girth of common pipe sizes, and the band to start from
Pipe OD Girth (π × OD) Starting band length Typical arrangement
168 mm 0.53 m 1.0 - 1.5 m Two to four lengths
219 mm 0.69 m 1.5 m Two to three lengths
273 mm 0.86 m 1.5 - 2.0 m Two lengths
325 mm 1.02 m 2.0 m Two lengths
406 mm 1.28 m 2.0 - 2.5 m Single or paired
508 mm 1.60 m 2.5 m Single or paired
610 mm 1.92 m 2.5 - 3.0 m Wokwatiwa
762 mm 2.39 m 3.0 - 3.5 m Wokwatiwa

Starting lengths assume a single wrap and a 0.6 m allowance. A bundle wider than one pipe, a double wrap, or a tail that has to be tied off adds to the figure — send the bundle dimensions and the length is quoted against them.

Chitsanzo chogwira ntchito: one length of 508 mm pipe, kutsokomola kamodzi. Girth 1.60 m + 0.6 m = 2.2 m, rounded up to a 2.5 m gulu. A pair of the same pipes is measured on the pair, not on the pipe: 1.016 m wide by 0.508 m deep gives 2 × 1.016 + 2 × 0.508 = 3.05 m of girth, choncho 3.65 m with the allowance and a 4 m gulu.

Choosing the band for the pipe you have

The wall, the coating and the end finish decide the width more often than the tonnage does, because the failure on pipe work is a cut or a crush at one contact line rather than a break in the middle of the band. The widths below are the starting point we quote from; take one size up where the pipe is coated, painted or has a sheared end.

Table 6 — Band width by pipe size and finish
Pipe outside diameter Bare black pipe Zokutidwa, painted or lined
Mpaka 200 mm 50 - 75 mm 75 - 100 mm, chikwama pa mzere wolumikizana
200 - 400 mm 75 - 100 mm 100 - 150 mm
400 - 600 mm 100 - 150 mm 150 mm, 7.5 mm gulu
Pamwamba 600 mm 150 mm, 7.5 mm gulu 150 - 200 mm with wear sleeve
Mitolo chubu ndi mbiri 75 - 200 mm 200 mm if the ends are square-cut

Three details are worth settling at the quotation rather than at the quay. A kuvala manja slid over the contact point takes the abrasion that would otherwise go into the load-bearing weave. A diso lolimbikitsidwa in a sleeve keeps a steel hook or shackle pin off the stitch line. And on thin-wall tube the choke should sit where the section is supported, not on an unsupported span — a 3 mm wall will oval under a choke that a 10 mm wall would not notice.

white polyester sling with reinforced red eyes for pipe lifting
A reinforced eye in a red sleeve: on pipe work the eye sits against the hook and takes the wear, which is cheaper than buying a size up.

Kuyika chizindikiro, packing and the one inspection

A one-way sling is inspected once, pa nkhani, and that inspection is the only one it will get. Everything the receiving site needs to know therefore has to be on the article, in a form that survives a sea freight and a forklift.

  • Printed on the band: working load limit and length, at a size a rigger can read from the ground — for example “WLL 3ton 2.5m”.
  • Sewn label at the eye: the same figures plus the fibre, gulu, the design factor and the standard; CE marking where the 7:1 series is supplied for a market that requires it, and type-test reports for other factors.
  • Your reference: order, bundle or project number printed at the same time as the WLL — printed into the band, not applied as a sticker that lifts in the hold.
  • Colour as a check: one colour per goods type or per customer, so the wrong bundle is not lifted at the far end with a sling that looks right.
  • Kulongedza: coiled and banded in bales for volume, cartoned for mixed sizes, or packed into the crate beside the goods so the slings arrive with the consignment instead of ahead of it.
sewn label on a one way sling showing working load limit and length
The sewn label carries the WLL, kutalika, fiber, the batch and the standard. On a one-trip article this is the whole record.

At issue, check three places: the eye — stitch line, bar-tack and eye mouth; the band along its length — cuts, snags, a thin patch that shows daylight, and any glazing or hardening from heat; and the print — if it cannot be read, the article cannot be rated. A sling that fails is destroyed rather than returned to a rack, because a band that comes back will be issued again carrying a marking nobody has checked.

Mtundu, ndi nambala pambali pake

Mpaka 10 t, MU 1492-1 assigns a colour to each working load limit so a supervisor can spot a wrong sling at a distance. Mtundu ndi cheke, never the authority: the label governs, ndi pamwamba 10 t — or on an undyed band — the print is the only statement of capacity.

Table 7 — EN 1492-1 kodi mtundu, with typical width and minimum length
WLL Mtundu M'lifupi mwake Kutalika kochepa
1,000 kg Violet 30 mm 1.1 m
2,000 kg Green 60 mm 1.2 m
3,000 kg Yellow 90 mm 1.3 m
4,000 kg Imvi 120 mm 1.4 m
5,000 kg Chofiira 150 mm 2.0 m
6,000 kg Brown 180 mm 2.0 m
8,000 kg Buluu 240 mm 2.0 m
10,000 kg lalanje 300 mm 3.0 m
12,000 kg No standard colour 300 mm 3.0 m

The 2 t row is the one most pipe orders land on, and it shows the trade-off plainly: 2,000 kg in a 60 mm single-ply band, or the same rating in a 30 mm double-ply band that will pass a narrow eye but spreads the load over half the face. For pipe, the wider band is usually the right choice; ndi 2000KG ntchito imodzi yokweza masing'i page sets the two builds side by side.

yellow endless webbing sling loop used for pipe and tube handling
The undyed and coloured bands are the same weave: the colour is a capacity code up to 10 t, not a different grade of sling.

Amafunsidwa pafupipafupi

Is a single-eye endless sling the same as a round sling?

Ayi. A round sling is a bundle of filament inside a woven sleeve, with no eye and no ends; this article is a flat webbing band closed into a loop and finished with a sewn eye. The round sling conforms better and is kinder to a coated surface, the flat band is thinner, cheaper and easier to print. For a pipe that must not be marked at all, yerekezerani ndi one way round slings.

Itha kugwiritsidwa ntchito kachiwiri?

It is built, zolembedwa ndi mtengo wa ulendo umodzi, and it is not inspected between lifts. A second use is an uninspected article doing a job nobody rated — which is exactly the failure the one-way discipline exists to prevent. If the sling is coming back into stock, buy the returnable gulaye with the same rating instead.

Why one eye rather than two for pipe?

Maso awiri amapanga gulaye choyimirira kapena dengu, which needs a lifting point or a pair of legs to sit on. A pipe bundle usually has neither: it has to be gripped. One eye and a tail is the whole of a choke, and a choke is what a round, slippery or coated load wants.

Ndimayitanitsa kutalika kotani?

The band length that gives the choke you need, worked out from the girth as in Table 5. Do not order by hook height: a 2.5 m band on a 508 mm pipe leaves only about 0.9 m of tail once the choke has closed, which is enough to pass back through the eye and no more.

How do I stop the pipe edge cutting the band?

Three ways, in order of cost: a wider band so the load is spread over more weave; a loose wear sleeve at the contact line, which is replaced with the sling rather than repaired; and edge protectors or a soft sling where the end is sheared or the wall is thin. On coated pipe the sleeve also protects the coating, which is usually the more expensive of the two losses.

Can it be printed with our reference and packed with the goods?

Inde. The WLL, kutalika, the batch and your own reference are printed on the band, a colour can be run per customer or per goods type, and the coils can be packed into the crate or the container with the consignment. The HS code is 630790 and the banded weight is confirmed on the quotation so the freight can be calculated before the order.

Pemphani mawu anu

Five lines and we can quote the choke

The pipe or tube: kunja kwake, khoma, zokutira, and whether it travels single or as a bundle;

The mass of one lift, and how many chokes you intend to use;

The factor your market expects — 5:1, 6:1 kapena 7:1 — and the hook or shackle the eye must pass;

Zolemba za kusindikiza, the colour, and whether the slings ship inside the consignment.

Send your lifting details for a quotation →

Malingaliro a kampani Lift Sling Rigging Co., Ltd., Ltd · Lifute Industrial Park, Mzinda wa Taizhou, Chigawo cha Jiangsu, China · HS kodi 630790 · Tel / WeChat +86 180 6600 2268 · 702461526@qq.com

Komwe mungapiteko

four single use slings lifting a square tube bundle in a factory
Where a bundle is lifted as one body, four chokes beat two: the load is shared, and each band grips its own section instead of sliding along the pack.

Kampani ya Lift Sling Rigging Company · Lifute Industrial Park, Mzinda wa Taizhou, Chigawo cha Jiangsu, China · HS kodi 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Siyani Uthenga Wanu

Pitani ku Top