Producten categorieën

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Korte beschrijving:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton rondstrop.

50 t heavy duty polyester endless round sling: 50,000 kilo per been, 350,000 kg bij 7:1, geen metaal in het lastpad. Op lengte gemaakt, proof loaded to EN 1492-2.

Productdetail

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton rondstrop.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 T WLL per leg 350 T breukbelasting 1–30 meter effectieve lengte 7:1 veiligheidsfactor
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Er zijn geen uiteinden, geen ogen, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Wij bouwen het op 1 m tot 30 m effective length, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the ronde slinger bereik. The tier below is the 40 ton rondstrop; the tier above is the 60 ton rondstrop. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Wat de 50 t figure actually buys you

The number on the sleeve is the working load limit of één been, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, omdat een echte lading nooit perfect symmetrisch zit.
Tafel 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 modus factoren)
Configuratie Factor Capaciteit
Eén slinger, verticaal × 1.0 50 T
Eén slinger, verstikte × 0.8 40 T
Eén slinger, basket at 0–7° × 2.0 100 t on the sling
Eén slinger, basket at 7–45° × 1.4 70 t on the sling
Eén slinger, basket at 45–60° × 1.0 50 T
Twee slingers, 0–45° ten opzichte van verticaal × 1.4 70 t ingesteld
Four slings, 0–45° ten opzichte van verticaal × 2.1 105 t ingesteld

Read the table from the load backwards. A 50 t belasting op twee benen nodig 50 t stroppen op 0–45° (70 t ingesteld) En 60 t slings once the legs pass 45°. Twee 30 t stroppen maken niet 60 T, and two 40 t stroppen dragen 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Waar 50 t sits against the tiers either side

At this size the sling is rarely the weak link: de haak, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tafel 2 — Single-leg rating against what a pair actually carries
Slinger Verticaal, één been Two legs at 0–45° Chosen when
30 T 30 T 42 T Up to about 40 t op twee poten, met marge
40 T 40 T 56 T 45–55 t on two legs at a moderate angle
50 T 50 T 70 T 55–65 t on two legs, or unknown weights
60 T 60 T 84 T Legs opening past 45° on a 50–60 t load

Een enkele 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Een rondstrop is twee artikelen in één, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist; every filament shares the load, which is how a body this slim rates at 50 T. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: bezuinigingen, haken en ogen, beglazing, chemische kleuring, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Zware uitvoering is een constructie, geen beoordeling

The phrase describes the sleeve and the standard of make. A 50 t slinger is 50 t wat de mouw ook is; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the ronde slinger met dubbele mouwen — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Geen metaal, geen uiteinden, no stitching in the load path — the loop is the sling.

Een stijf lichaam heeft ruimte nodig

A 50 Het lichaam buigt niet rond een kleine straal zoals a 10 Dat doet men niet. Als werkregel, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Strakke geometrie wordt meestal beantwoord met een langer lichaam, A hijsbalk om de benen dichter bij verticaal te brengen, of een ronde slinger met ogen op een gemeten lengte gemaakt.

Technische parameters

Tafel 3 — 50 t heavy duty polyester round sling, standaardspecificatie
Parameter Specificatie
Product 50 t heavy duty polyester lifting sling, eindeloze rondstrop, 50,000 kg ronde hijsband
Bouw Doorlopende parallelle filamentkern in een geweven buisvormige hoes, gesloten in een eindeloze lus; geen metaal in het lastpad
Kern Polyester met hoge sterktegraad (PES) multifilamenten, parallel liggen, gewaxt
Mouw Zwaar geweven polyester met een hoge sterktegraad, standaard enkele laag; dubbele hoes op bestelling
Maximale werklast 50,000 kg (50 T), enkel been, verticaal
Brekende belasting 350,000 kg bij een 7:1 factor
Veiligheidsfactor 7:1 standaard; andere factoren die op bestelling worden geproduceerd waar de markt dit vereist
Verlenging bij WLL Ongeveer 2–3 %
Bedrijfstemperatuur −40 °C tot +100 °C
Effectieve lengte 1–30 m made to order; Bij deze capaciteit geldt een minimale lengte
Kleur Standaard oranje; Andere mouwkleuren op bestelling
Markering WLL en lengte gedrukt op de mouw; genaaid label met WLL, lengte, serieel, standaard en datum
Standaard IN 1492-2 en ASME B30.9 bouwpraktijk
Testen Proef geladen vóór verzending; testrecord dat overeenkomt met het serienummer
Verpakking Opgerold in een polybag, geëtiketteerde doos; pallet of krat op aanvraag
MOQ & OEM Lage MOQ voor een proefbestelling; OEM op lengte, kleur mouw, kern vezel, etiketindeling en verpakking
Body diameter and unit mass follow the length and the sleeve option, en zijn weergegeven op de bij de offerte gevoegde tekening. Boven 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Lengte: effectieve lengte of omtrek

Een eindeloze slinger heeft geen uiteinden, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, en bij 50 t it is an expensive one to correct after the event.

Tafel 4 — The two length conventions
Geciteerd als You receive Gebruikt voor
Effectieve werklengte Halveer de omtrek – haak vast aan de last en maak een back-up Verticale en verstikte liften, waarbij de ophanghoogte bekend is
Omtrek De volledige luslengte Mandenliften, waarbij de omtrek van de last de lengte bepaalt

A 4 m effectieve lengte is een 8 m-lus. On our slings the figure printed on the sleeve is the effective length, zodat de print en de offerte altijd overeenkomen. Voor een mandenlift, take the girth of the load, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, which is the same as buying a smaller sling.

Markering, serial and proof-load traceability

Boven 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, lengte, serieel, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: A 12 m lichaam, quoted by effective length.

Waar een 50 t sling earns its place

At this capacity the sling is chosen for what it does niet do to the load — a wire rope grommet carries the same figure. The difference is contact.

  • Prefabliggers en brugsegmenten. Aan elk uiteinde een slinger, ligger opgeheven niveau; the sleeve protects the formed face and the chamfer.
  • Steel coils and plate packs. Mandje onder de rugzak, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformatoren, generatoren en machinebedden. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, dus een zachte lus die door het gat wordt geregen, is de hele methode.
  • Scheeps- en moduleblokken. Vierpunts met een balk erboven, waarbij de slinghoek de variabele is die de set bepaalt.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspectie, care and retirement

Inspecteer vóór elk gebruik, en formeel met de tussenpozen die uw regime vereist. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: bezuinigingen, haken en ogen, beglazing, melts, chemische kleuring.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Labelen en afdrukken: if the WLL or the length can no longer be read, de tilband kan niet worden geverifieerd.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, warmte beglazing, een kern die stijf of klonterig is geworden, chemical attack or a missing label.
  • Opgerold en van de vloer bewaren, buiten het daglicht en uit de buurt van hitte, oplosmiddelen en lasspatten; never store a sling wet in a closed bag, and never drag one under load.

Vaak gevraagd

Can one 50 t tillift 100 t in een mandje?

Aan de slingerzijde, Ja - 100 t bij 0–7°. In de praktijk de haak, hoofdlink of balk erboven moet ook worden beoordeeld 100 T, en bij dit formaat is de kraan dat meestal niet. Daarom het mandje bij 50 Het is eerst een gripbeslissing en daarna een capaciteitsbeslissing.

Doe er twee 50 t-tilbanden heffen 100 T?

Not at an angle. Two legs at 0–45° from vertical carry 70 T, En 50 t once the legs open past 45°. A genuine 100 t belasting op twee benen nodig 75 t stroppen, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: lage rek, goede slijtvastheid, −40 tot +100 °C, lowest cost at this rating. A UHMWPE-kern is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m of 8 M?

Say which convention you mean. A 4 m effectieve lengte is een 8 m-lus. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, add the girth of the load to the headroom and quote that.

What documentation comes with the sling?

A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

Nee. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Vraag een 50 t round sling quotation

Send the lift, get a drawing and a price

Belasting per been, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, the environment, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, China · HS-code 630790 · Tel +86 523 8693 5818 · WhatsAppen +86 180 6600 2268

Gerelateerde producten

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Bedrijf voor het hijsen van hijsbanden · Lifute Industrial Park, Taizhou-stad, Provincie Jiangsu, China · HS-code 630790
Tel +86 523 8693 5818 · WhatsAppen +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Laat uw bericht achter

Scroll naar boven