Products Categories

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Short Description:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kg ntawm 7:1, tsis muaj hlau nyob hauv txoj kev nqa. Ua raws li ntev, proof loaded to EN 1492-2.

Product Detail

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t breaking load 1–30 m ntev ua haujlwm 7:1 safety factor
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. There are no ends, no eyes, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

We build it from 1 m rau 30 m qhov ntev muaj txiaj ntsig, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, Yog li daim ntawv pov thawj hauv lub nplaub tshev yog ntawm lub sling hauv lub thawv.. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the round slings Kev deb. The tier below is the 40 tonne round sling; the tier above is the 60 tonne round sling. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

y 50 t figure actually buys you

The number on the sleeve is the working load limit of one leg, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. O, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, k.
Table 1 — What one 50 t round sling carries, by arrangement (EN 1492-2 mode factors)
Configuration Factor Capacity
Ib sling, ntsug × 1.0 50 t
Ib sling, choked × 0.8 40 t
Ib sling, basket at 0–7° × 2.0 100 t on the sling
Ib sling, basket at 7–45° × 1.4 70 t on the sling
Ib sling, basket at 45–60° × 1.0 50 t
Ob sling, 0-45° ntawm kab rov tav × 1.4 70 t set
Plaub sling, 0-45° ntawm kab rov tav × 2.1 105 t set

Nyeem daim ntawv los ntawm qhov thauj rov qab. A 50 t load ntawm ob ceg yuav tsum tau 50 t slings at 0–45° (70 t set) and 60 t slings once the legs pass 45°. Ob 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Qhov twg 50 t sits against the tiers either side

At this size the sling is rarely the weak link: the hook, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Table 2 — Single-leg rating against what a pair actually carries
n Vertical, one leg Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, with margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

A single 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

A round sling is two articles in one, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed thiab muab tso tsis muaj twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: Txiav, snags, glazing, n, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, k

The phrase describes the sleeve and the standard of make. A 50 v 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the s — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Tsis muaj hlau, tsis muaj kawg, no stitching in the load path — the loop is the sling.

A stiff body needs room

A 50 h 10 n. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a lifting beam to bring the legs closer to vertical, lossis a round sling with eyes made to a measured length.

Cov ntsiab lus technical

Table 3 — 50 t heavy duty polyester round sling, standard specification
Parameter Kev piav qhia
Product 50 t heavy duty polyester lifting sling, endless round sling, 50,000 kg round lifting sling
Construction Continuous parallel filament core in a woven tubular sleeve, closed into an endless loop; tsis muaj hlau nyob hauv txoj kev nqa
Core High-tenacity polyester (PES) multifilament, parallel lay, waxed
Sleeve Heavy duty woven high-tenacity polyester, single layer as standard; double sleeve to order
Kev txwv thauj khoom ua haujlwm 50,000 kg (50 t), single leg, ntsug
Kev thauj khoom tawg 350,000 kg at a 7:1 factor
Safety factor 7:1 raws li qauv; other factors produced to order where the market requires
Elongation at WLL Kwv yees 2–3 %
Service temperature −40 °C to +100 °C
Effective length 1–30 m made to order; minimum length applies at this capacity
Colour Orange as standard; xim sleeve lwm yam yuav xaj
Cim npe WLL and length printed on the sleeve; daim ntawv cim nrog WLL, ntev, serial, standard and date
Standard EN 1492-2 and ASME B30.9 construction practice
Kev kuaj Ntim pov thawj ua ntej xa tawm; cov ntaub ntawv kuaj phim tus lej serial
Ntim Coil hauv hnab poly, labelled carton; pallet lossis thawv thaum thov
MOQ & OEM MOQ qis rau kev sim; OEM ntawm ntev, xim hnab ris, core fibre, label layout and packing
Body diameter and unit mass follow the length and the sleeve option, and are shown on the drawing issued with the quotation. Sab saum 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Ntev: effective length or circumference

An endless sling has no ends, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, and at 50 t it is an expensive one to correct after the event.

Table 4 — The two length conventions
Quoted as You receive Used for
Effective working length Ib nrab ntawm circumference — hook nqes mus rau qhov hnyav thiab rov qab nce Vertical and choked lifts, thaum paub qhov siab ntawm kev nres
Circumference Qhov ntev tag nrho ntawm lub voj voog khiav Lub hnab nqa nce, thaum lub voj voog ntawm lub thauj khoom tsav qhov ntev

A 4 m effective length yog an 8 m lub voj voog . On our slings the figure printed on the sleeve is the effective length, yog li daim ntawv luam thiab nqi ib txwm sib haum. Rau ib lub hnab nqa khoom, nqa qhov dav ntawm lub thauj khoom, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, uas zoo ib yam li yuav ib lub sling me me.

Cim npe, serial and proof-load traceability

Sab saum 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, ntev, serial, standard and date of manufacture; Serial yog qhov txuas lub sling tiag tiag nrog nws cov ntawv..
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Daim ntawv pov thawj fiber thiab cov lej batch muaj thaum thov.; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m body, quoted by effective length.

Thaum ib tug 50 t sling earns its place

At this capacity the sling is chosen for what it does not do to the load — a wire rope grommet carries the same figure. Qhov txawv yog kev kov.

  • Cov hlau ua ntej thiab cov ntu choj. Ib lub sling ntawm txhua qhov kawg, lub girder nce qib; sleeve tiv thaiv qhov ntsej muag thiab chamfer.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformers, cov tshuab hluav taws xob thiab lub tshuab txaj. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, yog li ib lub voj mos khiav dhau qhov qhov yog tag nrho txoj kev.
  • Cov nkoj thiab module blocks. Plaub-taw nrog ib lub beam saum toj, uas lub kaum sab xis sling yog qhov hloov pauv uas txiav txim siab qhov teeb tsa.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspection, kev saib xyuas thiab so haujlwm

Xyuas ua ntej txhua qhov siv, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: Txiav, snags, glazing, melts, n.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: if the WLL or the length can no longer be read, the sling cannot be verified.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, heat glazing, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

feem ntau nug

Can one 50 t sling lift 100 t in a basket?

On the sling side, yes — 100 ntawm 0–7°. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

Do two 50 t sling nqa tau 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, and 50 t once the legs open past 45°. A genuine 100 t load ntawm ob ceg yuav tsum tau 75 t slings, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: kev ncab qis, lub neej zoo rau kev xeb, −40 to +100 °C, lowest cost at this rating. A UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, cov picks siab, lossis lub hnab nqa uas yuav tsum nqa mus saum ncej.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m lossis 8 m?

Hais tias koj txhais li cas. A 4 m effective length yog an 8 m lub voj voog . For a vertical or choked lift the effective length is the distance from hook to load; rau basket, ntxiv girth ntawm load rau headroom thiab hais tias.

What documentation comes with the sling?

A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

Tsis tau. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Request a 50 t round sling quotation

Send the lift, get a drawing and a price

Load per leg, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, ib puag ncig, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, China · HS code 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Related products

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Taizhou City, Jiangsu Province, China · HS code 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Leave Your Message

Scroll mus rau saum toj