• Dar /
  • Prodotti /
  • 50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kategoriji tal-Prodotti

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Deskrizzjoni Qasira:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kg fi 7:1, ebda metall fil-mogħdija tat-tagħbija. Magħmul għat-tul, proof loaded to EN 1492-2.

Dettall tal-Prodott

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg kull sieq u 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t tkissir tat-tagħbija 1–30 m tul effettiv 7:1 fattur tas-sigurtà
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. M'hemm l-ebda truf, l-ebda għajnejn, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

We build it from 1 m biex 30 m tul effettiv, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, għalhekk iċ-ċertifikat fil-folder jappartjeni għall-braga fiċ-ċestun. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the braga tonda firxa. The tier below is the 40 braga tonda tunnellata; the tier above is the 60 braga tonda tunnellata. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

X'inhu 50 t figure actually buys you

The number on the sleeve is the working load limit of sieq waħda, mdendlin vertikalment. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Żewġ aġġustamenti jibdlu l-figura b'sieq waħda f'figura stabbilita, and both of them move it.

  • Il-mod. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • L-angolu tar-riġel. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, għax tagħbija reali qatt ma toqgħod perfettament b'mod simetriku.
Tabella 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 fatturi tal-modalità)
Konfigurazzjoni Fattur Kapaċità
Braga waħda, vertikali × 1.0 50 t
Braga waħda, fgat × 0.8 40 t
Braga waħda, basket at 0–7° × 2.0 100 t on the sling
Braga waħda, basket at 7–45° × 1.4 70 t on the sling
Braga waħda, basket at 45–60° × 1.0 50 t
Two slings, 0–45° mill-vertikali × 1.4 70 t sett
Four slings, 0–45° mill-vertikali × 2.1 105 t sett

Read the table from the load backwards. A 50 t load on two legs needs 50 t slings at 0–45° (70 t sett) u 60 t slings once the legs pass 45°. Żewġ 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Fejn 50 t sits against the tiers either side

At this size the sling is rarely the weak link: the hook, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tabella 2 — Single-leg rating against what a pair actually carries
Sling Vertikali, sieq waħda Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, bil-marġni
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

A single 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Braga tonda hija żewġ oġġetti f'wieħed, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: qatgħat, snags, ħġieġ, tbajja kimika, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, mhux klassifikazzjoni

The phrase describes the sleeve and the standard of make. A 50 t braga hija 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the braga tonda kmiem doppju — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
No metal, bla truf, no stitching in the load path — the loop is the sling.

A stiff body needs room

A 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a travu ta 'rfigħ to bring the legs closer to vertical, jew a braga tonda bl-għajnejn made to a measured length.

Parametri tekniċi

Tabella 3 — 50 t heavy duty polyester round sling, speċifikazzjoni standard
Parametru Speċifikazzjoni
Prodott 50 t heavy duty polyester lifting sling, braga tonda bla tarf, 50,000 kg round lifting sling
Kostruzzjoni Continuous parallel filament core in a woven tubular sleeve, magħluqa f'linja bla tarf; ebda metall fil-mogħdija tat-tagħbija
Qalba Poliester ta 'tenaċità għolja (PES) multifilament, jistabbilixxu paralleli, waxed
kmiem Heavy duty woven high-tenacity polyester, single layer as standard; double sleeve to order
Limitu tat-tagħbija tax-xogħol 50,000 kg (50 t), sieq waħda, vertikali
Breaking load 350,000 kg fi a 7:1 fattur
Fattur tas-sigurtà 7:1 bħala standard; other factors produced to order where the market requires
Titwil fil-WLL Approximately 2–3 %
Temperatura tas-servizz −40 °C sa +100 °C
Tul effettiv 1–30 m made to order; minimum length applies at this capacity
Kulur Oranġjo bħala standard; kuluri oħra tal-kmiem għall-ordni
Immarkar WLL and length printed on the sleeve; tikketta meħjuta b'WLL, tul, serjali, standard u data
Standard IN 1492-2 and ASME B30.9 construction practice
Ittestjar Prova mgħobbija qabel id-dispaċċ; test record matched to the serial number
Ippakkjar Coil f'borża poly, kartuna ttikkettjata; pallet jew ċestun fuq talba
MOQ & OEM MOQ baxx għal ordni ta 'prova; OEM fuq it-tul, kulur tal-kmiem, fibra tal-qalba, it-tqassim tat-tikketta u l-ippakkjar
Body diameter and unit mass follow the length and the sleeve option, and are shown on the drawing issued with the quotation. Fuq 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Tul: effective length or circumference

Braga bla tarf m'għandha l-ebda truf, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, u fi 50 t hija waħda għalja biex tikkoreġi wara l-avveniment.

Tabella 4 — The two length conventions
Ikkwotat bħala Inti tirċievi Użat għal
Tul tax-xogħol effettiv Nofs iċ-ċirkonferenza — aqbad mat-tagħbija u lura Lifts vertikali u fgat, fejn l-għoli tad-dendil huwa magħruf
Ċirkonferenza It-tul tal-linja sħiħa Liftijiet tal-basket, fejn il-girth tat-tagħbija jmexxi t-tul

A 4 m tul effettiv huwa an 8 m linja. On our slings the figure printed on the sleeve is the effective length, għalhekk l-istampar u l-kwotazzjoni dejjem jaqblu. Għal basket lift, ħu l-girth tat-tagħbija, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, li huwa l-istess bħax-xiri ta 'braga iżgħar.

Immarkar, serial and proof-load traceability

Fuq 10 t the colour code stops identifying the sling, hekk fi 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Tikketta meħjuta ġġorr il-WLL, tul, serjali, standard u data tal-manifattura; is-serje huwa dak li jgħaqqad il-braga fiżika mal-burokrazija tagħha.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Ċertifikat tal-fibra u figuri tal-lott huma disponibbli fuq talba; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m korp, quoted by effective length.

Fejn a 50 t sling earns its place

At this capacity the sling is chosen for what it does le do to the load — a wire rope grommet carries the same figure. Id-differenza hija l-kuntatt.

  • Precast girders and bridge segments. One sling at each end, girder lifted level; il-kmiem jipproteġi l-wiċċ iffurmat u ċ-chamfer.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformers, ġeneraturi u sodod tal-magni. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Spezzjoni, kura u l-irtirar

Spezzjona qabel kull użu, u formalment fl-intervall ir-reġim tiegħek jeħtieġ. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: qatgħat, snags, ħġieġ, melts, tbajja kimika.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: jekk il-WLL jew it-tul ma jistgħux jinqraw aktar, the sling cannot be verified.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, ħġieġ tas-sħana, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

Mistoqsija ta' spiss

Can one 50 t sling lift 100 t f'basket?

On the sling side, iva — 100 t f'0-7°. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

Agħmel tnejn 50 t bragi lift 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, u 50 t once the legs open past 45°. A genuine 100 t load on two legs needs 75 t slings, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: medda baxxa, ħajja tajba tal-brix, −40 sa +100 °C, lowest cost at this rating. A qalba UHMWPE is worth it where the sling’s own weight is the problem — long bodies, fisien għolja, jew braga li trid tinġarr sa sellum.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m jew 8 m?

Għid liema konvenzjoni trid tfisser. A 4 m tul effettiv huwa an 8 m linja. For a vertical or choked lift the effective length is the distance from hook to load; għal basket, żid il-girth tat-tagħbija mal-headroom u kkwota dak.

Liema dokumentazzjoni tiġi mal-braga?

A sewn label carrying the WLL, tul u serjali; rekord ta' tagħbija ta' prova imqabbel ma' dak is-serje; ċertifikat tal-fibra u figuri tal-lott fuq talba. Għidilna qabel l-ordni jekk is-suq tiegħek jeħtieġx immarkar standard speċifiku.

Can the sleeve be replaced or repaired?

Nru. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Talba a 50 t round sling quotation

Send the lift, get a drawing and a price

Tagħbija għal kull sieq, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Tul jew ċirkonferenza effettivi, l-ambjent, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Iċ-Ċina · Kodiċi HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Prodotti relatati

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Belt Taizhou, Provinċja ta 'Jiangsu, Iċ-Ċina · Kodiċi HS 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Ħalli l-Messaġġ Tiegħek

Skrollja għal Fuq