Lift sling rigging company produce Single Ply Endless Lifting Sling,Single Ply Endless Sling,single ply Endless webbing sling,Single-Ply Endless Flat Sling.
Single Ply Endless Lifting Sling
One layer, one lapped joint, अंत नाही. The lightest closed loop in the range: it folds into a pocket, turns a tight radius and drapes over the load — 1 t ते 12 t येथे 7:1 दोन एक 1492-1.

The word to be careful with is ply. It does not mean two slings or two bands in parallel; it means how many layers of webbing are woven into the one band the loop is made from. Single ply is one layer, and everything that follows — the 4 mm section, the weight per metre, the way it turns round a small radius, and the capacity it can be given at a given width — comes from that one decision.
What one layer actually gives you
Four practical differences separate the single-layer loop from the duplex build, and each one shows up on a different job:
- ए 4 mm section. The band folds into a pocket, coils onto a hook and passes between a load and a tight gap where a thicker band will not go.
- Less weight per metre. The ladder below runs from 0.20 kg/m वर 1 t ते 2.05 kg/m वर 10 t — a one-handed carry for the sizes most yards actually use.
- More supple over a radius. One layer conforms to pipe, tube and rolled sections instead of standing off them, so contact is over the full width rather than at two edges.
- एक संयुक्त, thin and easy to read. The lapped joint is the only made connection in the load path; in a single layer the stitching rows sit on one visible face, with no second layer masking them.

Single ply against duplex, at the same width
The two builds are not two grades of the same thing; they are two answers to different questions. The comparison below is the one we use in quotation, and the widths are the published single-ply ladder.
| सिंगल प्लाय | डुप्लेक्स | |
|---|---|---|
| Layers in the band | एक | दोन, woven as one band |
| Section thickness | 4 mm at the standard ladder | Roughly twice the single-ply section |
| Capacity at a given width | The ladder figure | Higher — the reason duplex exists above the single-ply range |
| प्रति मीटर वजन | 0.20 kg/m वर 1 t ते 2.05 kg/m वर 10 t | Higher for the same width |
| हाताळणी | Folds small, turns a tight radius, drapes onto the load | कडक; sits flatter over an edge and resists abrasion longer |
| जिथे तो जिंकतो | Below about 6 t, tight gaps, लहान व्यास, mixed rigs | High capacity in a narrow width, rough edges, heavy abrasion |
| संयुक्त | One lap, stitching visible on the face | One lap through the doubled band |
The duplex build has its own page: double ply endless lifting sling.
The capacity ladder, सिंगल प्लाय
Working load limits are quoted in straight lift, येथे 7:1 दोन एक 1492-1. Colour follows EN 1492-1 and is a capacity band, not a material; वर 10 t there is no colour code and the label is the only rating.
| WLL, सरळ लिफ्ट | रंग | संदर्भ रुंदी | लांबीची श्रेणी | अंदाजे. वजन | गुदमरले (× 0.8) |
|---|---|---|---|---|---|
| 1 t | व्हायलेट | ऑर्डरची पुष्टी करा | 0.5 - 100 मी | 0.22 kg/m | 0.8 t |
| 2 t | हिरवा | 50 मिमी | 1 - 100 मी | 0.35 kg/m | 1.6 t |
| 3 t | पिवळा | 75 मिमी | 1 - 100 मी | 0.52 kg/m | 2.4 t |
| 4 t | राखाडी | 100 मिमी | 1.5 - 100 मी | 0.80 kg/m | 3.2 t |
| 5 t | लाल | 125 मिमी | 1.5 - 100 मी | 0.85 kg/m | 4.0 t |
| 6 t | तपकिरी | 150 मिमी | 1.5 - 100 मी | 0.96 kg/m | 4.8 t |
| 8 t | निळा | 200 मिमी | 2 - 100 मी | 1.34 kg/m | 6.4 t |
| 10 t | केशरी | 250 मिमी | 2 - 100 मी | 1.64 kg/m | 8.0 t |
| वर 10 t | रंग कोड नाही | Duplex build | ऑर्डर करण्यासाठी | विनंतीनुसार | लेबल नियंत्रित करते |
Widths and weights are the published series for this range; the finished width, ply and weight are confirmed on the order acknowledgement.
रुंदी, safety factor and the same capacity
A higher safety factor needs a wider band for the same working load limit, which is why the width column has three values. Tell us the standard your site works to and the sling is built to it; the figures below are the single-ply polyester ladder.
| WLL | येथे 5:1 | येथे 6:1 | येथे 7:1 | जाडी | येथे वजन 7:1 |
|---|---|---|---|---|---|
| 1 t (1 000 किलो) | 25 मिमी | 25 मिमी | 30 मिमी | 4 मिमी | 0.20 kg/m |
| 2 t (2 000 किलो) | 50 मिमी | 50 मिमी | 60 मिमी | 4 मिमी | 0.60 kg/m |
| 3 t (3 000 किलो) | 75 मिमी | 75 मिमी | 90 मिमी | 4 मिमी | 0.78 kg/m |
| 4 t (4 000 किलो) | 100 मिमी | 100 मिमी | 120 मिमी | 4 मिमी | 0.90 kg/m |
| 5 t (5 000 किलो) | 125 मिमी | 125 मिमी | 150 मिमी | 4 मिमी | 1.14 kg/m |
| 6 t (6 000 किलो) | 150 मिमी | 150 मिमी | 180 मिमी | 4 मिमी | 1.33 kg/m |
| 8 t (8 000 किलो) | 200 मिमी | 200 मिमी | 240 मिमी | 4 मिमी | 1.85 kg/m |
| 10 t (10 000 किलो) | 250 मिमी | 250 मिमी | 300 मिमी | 4 मिमी | 2.05 kg/m |
| 12 t (12 000 किलो) | 300 मिमी | 300 मिमी | 300 मिमी | 4 मिमी | 2.70 kg/m |

The joint, and why it is the first thing to look at
An endless sling is endless in use, अखंड नाही. The band is lapped over itself and closed with dense parallel rows of stitching; that lap is a full-strength joint and it sits in the load path. It is the only made connection in the whole article.
On a single-layer loop that joint is easier to inspect than on a duplex one, because the stitching rows lie on one visible face rather than between two layers. Look for broken or pulled stitches, a lap that has started to open, and abrasion where the lap passes over an edge. If the joint is sound, the rest of the loop is one continuous band and can be read anywhere along its length.

Three hitches from the same loop
The marked figure is the straight-lift rating; every other arrangement is derived from it. Size the sling to the hitch the crew will actually rig, not to the one in the lift plan.
| हिच | मोड घटक | साइटवर याचा अर्थ काय आहे |
|---|---|---|
| उभ्या | × 1.0 | The label figure applies directly |
| गुदमरले | × 0.8 | ए 4 t लोड in a चोक आवश्यक आहे 5 t sling — the wrap grips as the load comes on |
| टोपली, उभ्या जवळ पाय | × 2.0 | Both sides of the loop carry the load and the bearing face is doubled |
| टोपली, 7°–45° | × 1.4 | As the legs open the rating falls; plan the angle, not only the weight |
| टोपली, 45°–60° | × 1.0 | At wide angles the basket advantage is gone — treat it as a straight lift |
लांबी: घेर, or the height you actually get
बंद लूपला अंत नसतो, त्यामुळे शेवटपर्यंत मोजण्यासाठी काहीही नाही. This trade quotes the same sling two ways, and they differ by about a factor of two: the circumference is the perimeter of the loop, while the effective working length is the usable height you get, roughly half the circumference because the loop is doubled when it hangs.
| म्हणून उद्धृत केले | ते काय मोजते | समान गोफण समान |
|---|---|---|
| घेर | The perimeter of the loop — total band in the article | 2 मी |
| प्रभावी कामकाजाची लांबी | वापरण्यायोग्य उंची; the loop doubles when it hangs | 1 मी |
Name the convention with the figure, किंवा त्याऐवजी वापर सांगा — लूपच्या लेखाच्या परिघापर्यंत जावे लागते — आणि बँड कापण्यापूर्वी अस्पष्टता नाहीशी होते.

पॉलिस्टर, and the limits of it
The standard build is 100% उच्च दृढता पॉलिस्टर (PES). It elongates no more than 3% at the working load limit and no more than 10% ब्रेकिंग लोड येथे, so the load does not creep down as the lift comes on, and the standard build works from −40 °C to +100 °C. Nylon is offered where shock and abrasion dominate; polypropylene where weight and cost matter more than strength; UHMWPE and aramid where strength-to-weight or heat is the deciding factor.
What ends a polyester build is the same list as for any synthetic sling: heat above the range, strong alkalis, sharp edges that cut rather than abrade, and a cut or a glaze anywhere on the circumference. On a closed loop there is no second end to compare, so condition is judged against the surrounding band.

Marking and traceability
- IN 1492-1 capacity colour in the weave — violet 1 t, हिरवा 2 t, पिवळा 3 t, राखाडी 4 t, लाल 5 t, तपकिरी 6 t, निळा 8 t, संत्रा 10 t.
- One black transverse stripe per tonne as a second, optical check on the band itself.
- A sewn label with the working load limit, साहित्य, मानक, length and traceability code — and above 10 t, the label is the only rating there is.
- Every sling proof tested in our own laboratory before dispatch, with a test certificate per batch on request; एचएस कोड 630790.

वारंवार विचारले
What does single ply mean, exactly?
One layer of webbing in the band the loop is made from — not two slings, and not two bands side by side. It gives a 4 mm section at the standard ladder widths, the lowest weight per metre in the range, and the most supple loop we build.
Is an endless sling seamless?
नाही. त्याचा वापर अंतहीन आहे, अखंड नाही: the band is lapped over itself and closed with dense parallel stitching, and that lap is a full-strength joint in the load path. What a closed loop removes is the eyes and the end fittings, not the joint. If you need a closed loop with no joint in the load-bearing element at all, ते आहे अंतहीन गोल गोफण, where the core is continuous.
How far up the capacity range does single ply go?
The single-ply ladder is published to 12 t येथे 7:1 in a 300 मिमी बँड; the range as a whole runs to 30 t, and above the single-ply ladder the duplex build is the answer rather than a wider single band.
Can I use one loop for a vertical lift and a choke?
होय, and the figure changes with the arrangement: 1.0 अनुलंब, 0.8 गुदमरणे, 2.0 in a basket with the legs near vertical, वर पडणे 1.4 and then 1.0 as the legs open. Size to the hitch the crew will actually rig.
Will a single ply sling mark aluminium or painted steel?
बँड सिंथेटिक फायबर आहे आणि कोणतेही फिटिंग लोडला स्पर्श करत नाही, so it will not scratch or burr the way a chain or a wire rope can. Width is the protection measure — for mirror-finish or anodised work, specify a width above the capacity ladder and the pressure on the surface falls with it.
How should the length be quoted?
परिघानुसार किंवा प्रभावी कामकाजाच्या लांबीनुसार - दोन्ही सुमारे दोन घटकांनी भिन्न आहेत. अधिवेशनाला नाव द्या, or give the girth of the article the loop must go round, and the figure is confirmed on the order acknowledgement.
कोटेशनची विनंती करा
Five things settle a single ply loop
The load — what it is, its girth at the pick positions, and its surface;
The hitch — vertical, गुदमरलेली किंवा टोपली, and the leg angle if it is a basket;
The working load limit in that hitch, and the safety factor your site works to;
The length — with its convention, or the girth the loop has to go round;
The marking and packing — own-brand label, carton or pallet specification.
पुढे कुठे जायचे
- The endless lifting sling range — every closed form, compared by load;
- सिंगल प्लाय अंतहीन फ्लॅट स्लिंग आणि polyester endless flat strap sling for the full size and weight tables;
- Double ply endless lifting sling where the capacity needs to go up at the same width;
- अंतहीन वेब गोफण आणि अंतहीन गोफण for the type A article in full;
- स्टील पाईप लिफ्टिंग पट्टा पाईप कर्तव्यासाठी, आणि the one-way single ply version for single-trip export packing;
- बद्धी स्लिंग्ज in all builds, आणि contact.