Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 ກິໂລຕໍ່ຂາແລະ 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

We build it from 1 m ກັບ 30 m ຄວາມຍາວປະສິດທິພາບ, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, ດັ່ງນັ້ນໃບຢັ້ງຢືນຢູ່ໃນໂຟນເດີເປັນຂອງ sling ໃນ crate ໄດ້. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the ສາຍເຊືອກ ຊ່ວງ. The tier below is the 40 ໂຕນ sling ມົນ; the tier above is the 60 ໂຕນ sling ມົນ. For the whole heavy series see heavy duty round slings.

ແມ່ນຫຍັງ 50 t figure actually buys you
The number on the sleeve is the working load limit of ຂາຫນຶ່ງ, ຫ້ອຍຕາມແນວຕັ້ງ. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
| ການຕັ້ງຄ່າ | ປັດໄຈ | ຄວາມອາດສາມາດ |
|---|---|---|
| ເຊືອກສາຍໜຶ່ງ, ຕັ້ງ | × 1.0 | 50 t |
| ເຊືອກສາຍໜຶ່ງ, ຊັກ | × 0.8 | 40 t |
| ເຊືອກສາຍໜຶ່ງ, basket at 0–7° | × 2.0 | 100 t on the sling |
| ເຊືອກສາຍໜຶ່ງ, basket at 7–45° | × 1.4 | 70 t on the sling |
| ເຊືອກສາຍໜຶ່ງ, basket at 45–60° | × 1.0 | 50 t |
| ສອງເຊືອກ, 0-45° ຈາກແນວຕັ້ງ | × 1.4 | 70 t ຕັ້ງ |
| ສີ່ slings, 0-45° ຈາກແນວຕັ້ງ | × 2.1 | 105 t ຕັ້ງ |
ອ່ານຕາຕະລາງຈາກການໂຫຼດກັບຄືນໄປບ່ອນ. ກ 50 t ໂຫຼດສຸດສອງຂາຕ້ອງການ 50 t slings ຢູ່ 0–45° (70 t ຕັ້ງ) ແລະ 60 t slings once the legs pass 45°. ສອງ 30 t slings ບໍ່ເຮັດໃຫ້ 60 t, and two 40 t slings ປະຕິບັດ 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
ຢູ່ໃສ 50 t sits against the tiers either side
At this size the sling is rarely the weak link: hook ໄດ້, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Sling | ຕັ້ງ, ຂາຫນຶ່ງ | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t ສອງຂາ, ກັບຂອບ |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
ອັນດຽວ 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
ຫຼັກປະຕິບັດການໂຫຼດ, the sleeve decides the life
A sling ຮອບແມ່ນສອງບົດຄວາມໃນຫນຶ່ງ, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed ແລະວາງໄວ້ໂດຍບໍ່ມີການບິດ; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: ການຕັດ, ງູ, glazing, ການ staining ສານເຄມີ, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
ຫນ້າທີ່ຫນັກແມ່ນການກໍ່ສ້າງ, ບໍ່ແມ່ນການຈັດອັນດັບ
The phrase describes the sleeve and the standard of make. ກ 50 t sling ແມ່ນ 50 t ໃດກໍ່ຕາມແຂນ; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the sling ແຂນຄູ່ — on a clean indoor lift it is money spent on nothing.

ຮ່າງກາຍແຂງກະດ້າງຕ້ອງການຫ້ອງ
ກ 50 t ຮ່າງກາຍບໍ່ໂຄ້ງຮອບເປັນລັດສະໝີທີ່ແໜ້ນໜາ ກ 10 t ຫນຶ່ງເຮັດ. ຕາມກົດລະບຽບການເຮັດວຽກ, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. ເລຂາຄະນິດທີ່ເຄັ່ງຄັດແມ່ນມັກຈະຕອບດ້ວຍຮ່າງກາຍທີ່ຍາວກວ່າ, ກ beam ຍົກ ເພື່ອເອົາຂາເຂົ້າໃກ້ແນວຕັ້ງ, ຫຼື ກ Sling ຮອບດ້ວຍຕາ ສ້າງເປັນຄວາມຍາວວັດແທກ.
ຕົວກໍານົດການດ້ານວິຊາການ
| ພາລາມິເຕີ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຜະລິດຕະພັນ | 50 t heavy duty polyester lifting sling, sling ຕະຫຼອດທີ່ບໍ່ມີທີ່ສິ້ນສຸດ, 50,000 kg sling ຍົກໄດ້ຕະຫຼອດ |
| ການກໍ່ສ້າງ | ແກນ filament ຂະຫນານຢ່າງຕໍ່ເນື່ອງຢູ່ໃນແຂນ tubular ແສ່ວ, ປິດເຂົ້າໄປໃນ loop ທີ່ບໍ່ມີທີ່ສິ້ນສຸດ; ບໍ່ມີໂລຫະຢູ່ໃນເສັ້ນທາງການໂຫຼດ |
| ຫຼັກ | polyester ທົນທານສູງ (PES) multifilament, ວາງຂະຫນານ, ຂີ້ເຜີ້ງ |
| ເສອແຂນ | ຜ້າ Polyester ທີ່ມີຄວາມທົນທານສູງ, ຊັ້ນດຽວຕາມມາດຕະຖານ; ແຂນສອງເທົ່າເພື່ອສັ່ງ |
| ຂີດຈຳກັດການໂຫຼດ | 50,000 ກິໂລ (50 t), ຂາດຽວ, ຕັ້ງ |
| ການໂຫຼດແຕກ | 350,000 ກິໂລຕໍ່ ກ 7:1 ປັດໄຈ |
| ປັດໄຈຄວາມປອດໄພ | 7:1 ຕາມມາດຕະຖານ; ປັດໃຈອື່ນໆທີ່ຜະລິດເພື່ອສັ່ງບ່ອນທີ່ຕະຫຼາດຕ້ອງການ |
| ການຍືດຕົວຢູ່ທີ່ WLL | Approximately 2–3 % |
| ອຸນຫະພູມການບໍລິການ | −40°C ເຖິງ +100 °C |
| ຄວາມຍາວທີ່ມີປະສິດທິພາບ | 1–30 m made to order; ຄວາມຍາວຕໍ່າສຸດແມ່ນໃຊ້ໃນຄວາມສາມາດນີ້ |
| ສີ | ສີສົ້ມຕາມມາດຕະຖານ; ສີແຂນອື່ນໆສັ່ງໄດ້ |
| ເຄື່ອງຫມາຍ | WLL ແລະຄວາມຍາວທີ່ພິມຢູ່ເທິງແຂນ; ປ້າຍ sewn ກັບ WLL, ຄວາມຍາວ, ລໍາດັບ, ມາດຕະຖານ ແລະວັນທີ |
| ມາດຕະຖານ | IN 1492-2 ແລະການປະຕິບັດການກໍ່ສ້າງ ASME B30.9 |
| ການທົດສອບ | ຫຼັກຖານສະແດງກ່ອນການຈັດສົ່ງ; ບັນທຶກການທົດສອບທີ່ກົງກັບເລກລໍາດັບ |
| ການຫຸ້ມຫໍ່ | ມ້ວນໃນຖົງ poly, ກ່ອງໃສ່ປ້າຍ; pallet ຫຼື crate ຕາມການຮ້ອງຂໍ |
| MOQ & OEM | MOQ ຕ່ໍາສໍາລັບຄໍາສັ່ງທົດລອງ; OEM ກ່ຽວກັບຄວາມຍາວ, ສີແຂນ, ເສັ້ນໄຍຫຼັກ, ແຜນຜັງປ້າຍຊື່ແລະການຫຸ້ມຫໍ່ |
ຄວາມຍາວ: ຄວາມຍາວຫຼືເສັ້ນຜ່າສູນກາງທີ່ມີປະສິດທິພາບ
ສາຍເຊືອກທີ່ບໍ່ມີທີ່ສິ້ນສຸດບໍ່ມີບ່ອນສິ້ນສຸດ, so its length can be quoted two ways and the two are a factor of two apart. ນີ້ແມ່ນຄວາມຜິດພາດການສັ່ງຊື້ທົ່ວໄປທີ່ສຸດໃນສາຍເຊືອກຮອບ, ແລະຢູ່ 50 t ມັນເປັນລາຄາແພງທີ່ຈະແກ້ໄຂຫຼັງຈາກເຫດການ.
| ອ້າງວ່າ | ທ່ານໄດ້ຮັບ | ໃຊ້ສໍາລັບ |
|---|---|---|
| ຄວາມຍາວການເຮັດວຽກທີ່ມີປະສິດທິພາບ | ເຄິ່ງວົງມົນ — hook ລົງກັບການໂຫຼດແລະສໍາຮອງຂໍ້ມູນ | ຍົກແນວຕັ້ງ ແລະ choked, ບ່ອນທີ່ຄວາມສູງຫ້ອຍແມ່ນເປັນທີ່ຮູ້ຈັກ |
| ວົງຮອບ | ຄວາມຍາວຂອງ loop ເຕັມ | ຍົກກະຕ່າ, ບ່ອນທີ່ girth ຂອງການໂຫຼດໄດ້ຂັບລົດຄວາມຍາວ |
ກ 4 m ຄວາມຍາວປະສິດທິພາບແມ່ນເປັນ 8 m loop. On our slings the figure printed on the sleeve is the effective length, ດັ່ງນັ້ນການພິມແລະວົງຢືມແມ່ນຕົກລົງເຫັນດີສະເຫມີ. ສໍາລັບການຍົກກະຕ່າ, ເອົາ girth ຂອງການໂຫຼດໄດ້, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, ເຊິ່ງຄືກັນກັບການຊື້ sling ຂະຫນາດນ້ອຍກວ່າ.
ເຄື່ອງຫມາຍ, serial and proof-load traceability
ຂ້າງເທິງ 10 t the colour code stops identifying the sling, ສະນັ້ນຢູ່ 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- ປ້າຍທີ່ຫຍິບແມ່ນຖື WLL, ຄວາມຍາວ, ລໍາດັບ, ມາດຕະຖານແລະວັນທີຜະລິດ; serial ແມ່ນສິ່ງທີ່ເຊື່ອມຕໍ່ sling ທາງດ້ານຮ່າງກາຍກັບເອກະສານຂອງຕົນ.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- ໃບຮັບຮອງເສັ້ນໄຍແລະຕົວເລກ batch ແມ່ນມີຢູ່ໃນການຮ້ອງຂໍ; if your market needs a specific standard marking, say so before the order rather than after.

ບ່ອນທີ່ ກ 50 t sling earns its place
At this capacity the sling is chosen for what it does ບໍ່ do to the load — a wire rope grommet carries the same figure. ຄວາມແຕກຕ່າງແມ່ນການຕິດຕໍ່.
- ພາກສ່ວນຂົວ ແລະພາກສ່ວນຂົວ. ເຊືອກສາຍໜຶ່ງຢູ່ແຕ່ລະປາຍ, girder ລະດັບຍົກ; ເສອແຂນປົກປ້ອງໃບຫນ້າທີ່ຖືກສ້າງຕັ້ງຂຶ້ນແລະ chamfer ໄດ້.
- Steel coils and plate packs. ກະຕ່າພາຍໃຕ້ຊອງ, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- ໝໍ້ແປງ, ເຄື່ອງປັ່ນໄຟ ແລະຕຽງເຄື່ອງ. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- ເຮືອແລະໂມດູນຕັນ. ສີ່ຈຸດທີ່ມີ beam ຂ້າງເທິງ, ບ່ອນທີ່ມຸມ sling ແມ່ນຕົວແປທີ່ຕັດສິນໃຈຊຸດ.


ການກວດກາ, ການດູແລແລະການບໍານານ
ກວດສອບກ່ອນການນໍາໃຊ້ທຸກຄັ້ງ, ແລະຢ່າງເປັນທາງການໃນໄລຍະເວລາທີ່ລະບອບຂອງເຈົ້າຕ້ອງການ. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: ການຕັດ, ງູ, glazing, melts, ການ staining ສານເຄມີ.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- ປ້າຍແລະພິມ: ຖ້າ WLL ຫຼືຄວາມຍາວບໍ່ສາມາດອ່ານໄດ້, sling ບໍ່ສາມາດກວດສອບໄດ້.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, glazing ຄວາມຮ້ອນ, ແກນທີ່ແຂງ ຫຼືເປັນກ້ອນ, chemical attack or a missing label.
- ເກັບຮັກສາມ້ວນແລະອອກຈາກພື້ນເຮືອນ, ອອກຈາກແສງແດດແລະຫ່າງຈາກຄວາມຮ້ອນ, solvents ແລະ spatter ການເຊື່ອມ; ຢ່າເກັບສາຍເຊືອກປຽກໄວ້ໃນຖົງປິດ, and never drag one under load.
ຖືກຖາມເລື້ອຍໆ
Can one 50 t sling ຍົກ 100 t ໃນກະຕ່າ?
ຂ້າງ sling, ແມ່ນ - 100 t ທີ່ 0–7°. ໃນການປະຕິບັດ hook ໄດ້, ການເຊື່ອມໂຍງຕົ້ນສະບັບຫຼື beam ຂ້າງເທິງມັນຍັງຕ້ອງໄດ້ຮັບການຈັດອັນດັບສໍາລັບ 100 t, ແລະໃນຂະຫນາດນີ້ crane ປົກກະຕິແລ້ວແມ່ນບໍ່. ນັ້ນແມ່ນເຫດຜົນທີ່ວ່າກະຕ່າຢູ່ 50 t ແມ່ນການຕັດສິນໃຈຈັບມືທໍາອິດແລະການຕັດສິນໃຈຄວາມສາມາດທີສອງ.
Do two 50 t slings ຍົກ 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, ແລະ 50 t once the legs open past 45°. A genuine 100 t ໂຫຼດສຸດສອງຂາຕ້ອງການ 75 t slings, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: stretch ຕ່ໍາ, ຊີວິດການຂັດທີ່ດີ, −40 ເຖິງ +100 °C, lowest cost at this rating. ກ ຫຼັກ UHMWPE is worth it where the sling’s own weight is the problem — long bodies, ເລືອກສູງ, ຫຼືສາຍເຊືອກທີ່ຕ້ອງຍົກຂຶ້ນເປັນຂັ້ນໄດ.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m ຫຼື 8 ມ?
ເວົ້າວ່າສົນທິສັນຍາໃດທີ່ທ່ານຫມາຍເຖິງ. ກ 4 m ຄວາມຍາວປະສິດທິພາບແມ່ນເປັນ 8 m loop. For a vertical or choked lift the effective length is the distance from hook to load; ສໍາລັບກະຕ່າ, ເພີ່ມ girth ຂອງການໂຫຼດໄດ້ headroom ແລະອ້າງວ່າ.
ເອກະສານໃດທີ່ມາພ້ອມກັບສາຍເຊືອກ?
A sewn label carrying the WLL, ຄວາມຍາວແລະ serial; ບັນທຶກການໂຫຼດທີ່ກົງກັບ serial ນັ້ນ; ໃບຮັບຮອງເສັ້ນໄຍແລະຕົວເລກ batch ຕາມການຮ້ອງຂໍ. ບອກພວກເຮົາກ່ອນຄໍາສັ່ງຖ້າຕະຫຼາດຂອງທ່ານຕ້ອງການເຄື່ອງຫມາຍມາດຕະຖານສະເພາະ.
Can the sleeve be replaced or repaired?
ບໍ່. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
ຮ້ອງຂໍ ກ 50 t round sling ວົງຢືມ
Send the lift, get a drawing and a price
ໂຫຼດຕໍ່ຂາ, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
ຄວາມຍາວ ຫຼືເສັ້ນຜ່າສູນກາງທີ່ມີປະສິດທິພາບ, ສະພາບແວດລ້ອມ, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, ຈຽງຊູ, ຈີນ · ລະຫັດ HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
ຜະລິດຕະພັນທີ່ກ່ຽວຂ້ອງ
- slings ຕະຫຼອດ, 1– 1000 ທ — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T polyester slings ຮອບ — for 40 t loads on two legs;
- 60 ໂຕນ sling ມົນ — the tier above;
- Heavy duty round sling range — 50 t ແລະຂ້າງເທິງ, heavier sleeves;
- Sling ມົນດ້ວຍຕາ — a measured length and two pick-up points;
- ເຊືອກສາຍເຊືອກແປ — the same rating in a thinner profile;
- ການຍົກ beams — to keep multi-leg sets closer to vertical.
