Produit Kategorien

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kuerz Beschreiwung:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

50 t heavy duty polyester endless round sling: 50,000 kg pro Been, 350,000 kg op 7:1, kee Metal am Laascht Wee. Op Längt gemaach, proof loaded to EN 1492-2.

Produit Detailer

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t briechen Laascht 1-30 m effektiv Längt 7:1 Sécherheet Faktor
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Et gi keng Enner, keng Aen, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Mir bauen et aus 1 m zu 30 m effective length, eenzeg oder duebel Hülse, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the ronn sling Gamme. The tier below is the 40 Tonne Ronn sling; the tier above is the 60 Tonne Ronn sling. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Wat de 50 t figure actually buys you

The number on the sleeve is the working load limit of engem Been, vertikal hänken. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
Dësch 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 Modus Faktoren)
Configuratioun Faktor Kapazitéit
Eng Schlaang, vertikal × 1.0 50 t
Eng Schlaang, erstéckt × 0.8 40 t
Eng Schlaang, Kuerf bei 0-7° × 2.0 100 t on the sling
Eng Schlaang, Kuerf op 7-45° × 1.4 70 t on the sling
Eng Schlaang, Kuerf bei 45-60° × 1.0 50 t
Zwee Schlaangen, 0-45° vu vertikalen × 1.4 70 t gesat
Véier Schlaangen, 0-45° vu vertikalen × 2.1 105 t gesat

Read the table from the load backwards. A 50 t Laascht op zwee Been brauch 50 t slings bei 0-45° (70 t gesat) an 60 t slings once the legs pass 45°. Zwee 30 t slings maachen net 60 t, and two 40 t slings droen 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Wou 50 t sits against the tiers either side

At this size the sling is rarely the weak link: den Haken, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Dësch 2 — Single-leg rating against what a pair actually carries
Schlaang Vertikal, engem Been Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t op zwee Been, with margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Eng eenzeg 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

De Kär dréit d'Laascht, the sleeve decides the life

E ronnen Sling ass zwee Artikelen an engem, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, gewaxt an ouni Twist geluecht; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: Schnëtt, knacken, Verglasung, chemesch Faarwen, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy Duty ass e Bau, net eng Bewäertung

The phrase describes the sleeve and the standard of make. A 50 t Schlaang ass 50 t egal wéi d'Hülse; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the duebel sleeve Ronn sling — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange gewéckelt Hülse, Studio Vue
Kee Metall, keng Enn, no stitching in the load path — the loop is the sling.

E steife Kierper brauch Plaz

A 50 t Kierper béit net ëm e knappe Radius wéi a 10 t een mécht. Als Aarbechtsregel, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Eng knapp Geometrie gëtt normalerweis mat engem méi laange Kierper geäntwert, a Hebestrahl fir d'Been méi no vertikal ze bréngen, oder a ronn sling mat Aen zu enger gemoosser Längt gemaach.

Technesch Parameteren

Dësch 3 - 50 t heavy duty polyester round sling, standard specification
Parameter Spezifizéierung
Produit 50 t heavy duty polyester lifting sling, endlos Ronn sling, 50,000 kg Ronn Ophiewe sling
Bau Kontinuéierlech parallele Filamentkär an enger gewéckelt tubulärer Hülse, an eng endlos Loop zougemaach; kee Metal am Laascht Wee
Kär Héich-Tenacity Polyester (PES) multifilament, parallel leeën, gewaxt
Ärmelen Heavy Duty gewéckelt héichwäerteg Polyester, eenzeg Layer als Standard; duebel Hülse op Bestellung
Aarbechtslastlimit 50,000 kg (50 t), eenzege Been, vertikal
Breaklast 350,000 kg op a 7:1 Faktor
Sécherheet Faktor 7:1 als Standard; aner Faktoren produzéiert op Uerdnung wou de Maart verlaangt
Elongation bei WLL Approximately 2–3 %
Service Temperatur -40 °C bis +100 °C
Effektiv Längt 1–30 m made to order; Minimum Längt gëllt bei dëser Kapazitéit
Faarf Orange als Standard; aner Ärmelfaarwen op Bestellung
Markéierung WLL an Längt op der Hülse gedréckt; gesait Label mat WLL, Längt, serial, Standard an Datum
Standard IN 1492-2 an ASME B30.9 Bau Praxis
Testen Beweis virum Versand gelueden; Testrekord entsprécht der Seriennummer
Verpakung Coil an enger Polybeutel, gezeechent Kartong; Palette oder Këscht op Ufro
MOQ & OEM Niddereg MOQ fir eng Proufbestellung; OEM op Längt, Ärm Faarf, Kärfaser, Label Layout a Verpakung
Body diameter and unit mass follow the length and the sleeve option, a ginn op der Zeechnung gewisen, déi mam Zitat erausginn ass. uewen 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Längt: effective length or circumference

En endlos Schlaang huet keng Enden, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, an op 50 t it is an expensive one to correct after the event.

Dësch 4 — The two length conventions
Zitéiert als Dir kritt Benotzt fir
Effektiv schaffen Längt D'Halschent vum Ëmfang - Haken erof op d'Laascht an zréck erop Vertikal an erstéckt Liften, wou d'Häng Héicht bekannt ass
Ëmfang Déi ganz Schleiflängt Basket Liften, wou de Girth vun der Laascht d'Längt dreift

A 4 m efficace Längt ass an 8 m luef. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. Fir e Kuerf Lift, huelen de Gürtel vun der Laascht, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, dat ass d'selwecht wéi e méi klenge Schlaang ze kafen.

Markéierung, serial and proof-load traceability

uewen 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, Längt, serial, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m Kierper, quoted by effective length.

Wou a 50 t sling earns its place

At this capacity the sling is chosen for what it does net do to the load — a wire rope grommet carries the same figure. The difference is contact.

  • Prefabrizéierte Gürtel a Brécksegmenter. Ee Schlaang op all Enn, girder opgehuewe Niveau; d'Hülse schützt d'geformt Gesiicht an d'Schacht.
  • Steel coils and plate packs. Kuerf ënner dem Pak, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformers, Generatoren an Maschinn Better. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Schëffer a Modulblocken. Véierpunkt mat engem Strahl uewen, wou de Schlaangwinkel d'Variabel ass déi de Set entscheet.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspektioun, care and retirement

Inspektéiert virun all Gebrauch, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: Schnëtt, knacken, Verglasung, melts, chemesch Faarwen.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label an Drécken: if the WLL or the length can no longer be read, de Sling kann net verifizéiert ginn.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, Hëtzt Verglasung, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

Oft gefrot

Can one 50 t sling lift 100 t an engem Kuerf?

Op der Sling Säit, Jo - 100 t bei 0-7°. An der Praxis den Haken, Master Link oder Strahl uewendriwwer muss och bewäert ginn 100 t, an op dëser Gréisst ass de Kran normalerweis net. Dofir de Kuerf um 50 t ass eng Grip Decisioun éischt an eng Kapazitéit Decisioun zweet.

Do two 50 t slings opgehuewe 100 t?

Not at an angle. Zwee Been op 0-45 ° vu vertikalen Droen 70 t, an 50 t once the legs open past 45°. A genuine 100 t Laascht op zwee Been brauch 75 t schlofen, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: niddereg Streck, gutt Abrasioun Liewen, -40 bis +100 °C, lowest cost at this rating. A UHMWPE Kär is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

Wéi eng Längt bestellen ech - 4 m oder 8 m?

Sot wéi eng Konventioun Dir mengt. A 4 m efficace Längt ass an 8 m luef. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, füügt den Ëmgank vun der Laascht op de Kappraum an zitéiert dat.

Wéi eng Dokumentatioun kënnt mat der Schlaang?

A sewn label carrying the WLL, Längt a Serien; e Beweis-Laascht-Rekord, dee mat deem Serien passt; e Faserzertifika a Batchzuelen op Ufro. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

Nee. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Ufro a 50 t Ronn sling quote

Send the lift, get a drawing and a price

Laascht pro Been, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, d'Ëmwelt, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industriezon, Taizhou, Jiangsu, China · HS Code 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Zesummenhang Produiten

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Taizhou Stad, Jiangsu Provënz, China · HS Code 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Verloossen Äre Message

Scroll op Top