• 집 /
  • 제품 /
  • 50T Heavy Duty Polyester Lifting Sling Endless Round Sling

제품 카테고리

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

간단한 설명:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 톤 라운드 슬링.

50 t heavy duty polyester endless round sling: 50,000 다리당 kg, 350,000 kg ~에 7:1, 로드 경로에 금속이 없음. 길이에 맞춰 제작됨, proof loaded to EN 1492-2.

제품 세부정보

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 톤 라운드 슬링.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 다리 당 kg 및 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 티 WLL per leg 350 티 파괴 하중 1-30m 유효 길이 7:1 안전계수
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

에이 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. 끝은 없어, 눈이 없다, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

우리는 그것을 구축합니다 1 m ~ 30 m 유효 길이, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, 따라서 폴더에 있는 인증서는 상자에 있는 슬링에 속합니다.. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the 둥근 슬링 범위. The tier below is the 40 톤 라운드 슬링; the tier above is the 60 톤 라운드 슬링. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
에이 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

무슨 50 t figure actually buys you

The number on the sleeve is the working load limit of 한쪽 다리, 수직으로 매달려. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. 두 가지 조정으로 외다리 체형을 세트 체형으로 바꿉니다., and both of them move it.

  • 모드. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • 다리 각도. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, 실제 하중은 완벽하게 대칭으로 놓일 수 없기 때문입니다..
테이블 1 — What one 50 t round sling carries, by arrangement (안에 1492-2 모드 요인)
구성 요인 용량
슬링 1개, 수직의 × 1.0 50 티
슬링 1개, 질식하다 × 0.8 40 티
슬링 1개, basket at 0–7° × 2.0 100 t on the sling
슬링 1개, basket at 7–45° × 1.4 70 t on the sling
슬링 1개, basket at 45–60° × 1.0 50 티
슬링 2개, 0수직에서 –45° × 1.4 70 t 세트
슬링 4개, 0수직에서 –45° × 2.1 105 t 세트

로드에서 거꾸로 테이블을 읽습니다.. 에이 50 두 다리에 짐을 싣지 마세요. 50 0~45°의 t 슬링 (70 t 세트) 그리고 60 t slings once the legs pass 45°. 둘 30 슬링은 만들지 않는다 60 티, and two 40 t 슬링 운반 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

어디 50 t sits against the tiers either side

At this size the sling is rarely the weak link: 후크, 족쇄, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

테이블 2 — Single-leg rating against what a pair actually carries
슬링 수직의, 한쪽 다리 Two legs at 0–45° 다음과 같은 경우에 선택됨
30 티 30 티 42 티 Up to about 40 두 다리로, 여백 있음
40 티 40 티 56 티 45–55 t on two legs at a moderate angle
50 티 50 티 70 티 55–65 t on two legs, or unknown weights
60 티 60 티 84 티 Legs opening past 45° on a 50–60 t load

싱글 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

라운드 슬링은 1개에 2개의 물품이 들어있습니다, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, 왁스 칠하고 비틀림 없이 눕혀서; every filament shares the load, which is how a body this slim rates at 50 티. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: 상처, 걸림돌, 유약, 화학적 염색, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

헤비 듀티는 빌드입니다, 등급이 아님

The phrase describes the sleeve and the standard of make. 에이 50 슬링은 50 t 소매가 무엇이든; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the 더블 슬리브 라운드 슬링 — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
금속 없음, 끝이 없어, no stitching in the load path — the loop is the sling.

뻣뻣한 몸에는 공간이 필요하다

에이 50 t 몸체는 a처럼 좁은 반경으로 구부러지지 않습니다. 10 하나도 그렇지 않아. 근무규칙으로는, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. 단단한 기하학은 일반적으로 더 긴 몸체로 대답됩니다., 에이 리프팅 빔 다리를 수직에 가깝게 가져오려면, 또는 눈이 달린 둥근 슬링 측정된 길이로 제작됨.

기술적인 매개변수

테이블 3 — 50 t heavy duty polyester round sling, standard specification
매개변수 사양
제품 50 t heavy duty polyester lifting sling, 끝없는 둥근 슬링, 50,000 kg 라운드 리프팅 슬링
건설 직조된 관형 슬리브에 연속적으로 평행한 필라멘트 코어가 있음, 무한 루프에 빠졌다; 로드 경로에 금속이 없음
핵심 고강도 폴리에스터 (PES) 멀티필라멘트, 평행하다, 왁스 칠한
소매 내구성이 강한 폴리에스터로 직조, 표준으로 단일 레이어; 더블 슬리브 주문
작업 부하 제한 50,000 kg (50 티), 한쪽 다리, 수직의
파단하중 350,000 kg에서 7:1 요인
안전계수 7:1 표준으로; 시장이 요구하는 곳에서 주문하기 위해 생산되는 기타 요소
WLL에서의 신장 약 2~3개 %
서비스 온도 −40°C ~ +100 ℃
유효 길이 1–30 m made to order; 이 용량에는 최소 길이가 적용됩니다.
색상 오렌지는 기본; 다른 슬리브 색상 주문
마킹 소매에 WLL과 길이가 인쇄되어 있습니다.; WLL로 봉제된 라벨, 길이, 연속물, 표준 및 날짜
기준 안에 1492-2 및 ASME B30.9 건설 실무
테스트 발송 전 증거 자료 로드됨; 일련번호와 일치하는 테스트 기록
포장 폴리 백에 코일, 라벨이 붙은 상자; 요청 시 팔레트 또는 상자
MOQ & OEM 시험 주문에 대한 낮은 MOQ; 길이에 대한 OEM, 소매 색상, 코어 섬유, 라벨 레이아웃 및 포장
본체 직경과 단위질량은 길이와 슬리브 옵션에 따릅니다., 견적과 함께 발행된 도면에 표시됩니다.. 위에 10 t the sleeve colour no longer encodes capacity — the print and the label do.

길이: 유효 길이 또는 둘레

끝이 없는 슬링에는 끝이 없다, so its length can be quoted two ways and the two are a factor of two apart. 이것은 라운드 슬링에서 가장 흔히 발생하는 주문 오류입니다., 그리고 에 50 t 이벤트 후에 수정하는 것은 비용이 많이 드는 일입니다..

테이블 4 — The two length conventions
다음과 같이 인용됨 당신은 받는다 용도
효과적인 작업 길이 둘레의 절반 - 짐에 연결하고 백업 수직 및 막힌 리프트, 매달린 높이를 아는 곳
둘레 전체 루프 길이 바구니 리프트, 하중의 둘레가 길이를 결정하는 곳

에이 4 m 유효 길이는 8 m 루프. On our slings the figure printed on the sleeve is the effective length, 그래서 인쇄물과 인용문은 항상 일치합니다. 바구니 리프트의 경우, 짐의 둘레를 잡아라, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, 이는 더 작은 슬링을 구입하는 것과 같습니다..

마킹, serial and proof-load traceability

위에 10 t the colour code stops identifying the sling, 그래서 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • 봉제된 라벨에는 WLL이 표시됩니다., 길이, 연속물, 규격 및 제조일자; 일련번호는 실제 슬링을 서류 작업에 연결하는 것입니다..
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • 요청 시 섬유 인증서 및 배치 수치를 이용할 수 있습니다.; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: 에이 12 m 몸, quoted by effective length.

어디서 50 t sling earns its place

At this capacity the sling is chosen for what it does ~ 아니다 do to the load — a wire rope grommet carries the same figure. 차이점은 접촉이다.

  • 프리캐스트 대들보 및 교량 세그먼트. 각 끝에 하나의 슬링, 대들보 들어 올려진 수준; 슬리브는 성형된 면과 모따기를 보호합니다..
  • Steel coils and plate packs. 팩 아래 바구니, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • 트랜스포머, 발전기 및 기계 침대. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, 그래서 구멍을 통과하는 부드러운 고리가 전체 방법입니다.
  • 선박 및 모듈 블록. 위에 빔이 있는 4포인트, 여기서 슬링 각도는 세트를 결정하는 변수입니다..
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

점검, 돌봄과 은퇴

매번 사용하기 전에 검사하세요., 공식적으로 귀하의 정권이 요구하는 간격으로. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: 상처, 걸림돌, 유약, melts, 화학적 염색.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • 라벨링 및 인쇄: WLL 또는 길이를 더 이상 읽을 수 없는 경우, 슬링은 확인할 수 없습니다.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, 열 유약, 뻣뻣하거나 울퉁불퉁해진 코어, chemical attack or a missing label.
  • 감아서 바닥에서 떨어진 곳에 보관하세요., 햇빛이 없고 열이 없는 곳, 용제 및 용접 스패터; 젖은 상태로 슬링을 밀봉된 가방에 보관하지 마십시오., and never drag one under load.

자주 묻는 질문

Can one 50 t 슬링 리프트 100 바구니에?

슬링쪽에, 예 - 100 0~7°에서. 실제로는 후크, 그 위의 마스터 링크나 빔도 등급이 매겨져야 합니다. 100 티, 이 크기에서는 일반적으로 크레인이 작동하지 않습니다.. 그렇기 때문에 바구니는 50 t는 그립 결정이 먼저이고 용량 결정이 두 번째입니다..

두 가지를 하세요 50 t 슬링 리프트 100 티?

Not at an angle. Two legs at 0–45° from vertical carry 70 티, 그리고 50 t once the legs open past 45°. A genuine 100 두 다리에 짐을 싣지 마세요. 75 t 슬링, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: 낮은 신축성, 좋은 마모 수명, -40 ~ +100 ℃, lowest cost at this rating. 에이 UHMWPE 코어 is worth it where the sling’s own weight is the problem — long bodies, 높은 추천, 또는 사다리 위로 운반해야 하는 슬링.

What about hot loads?

A standard polyester core is rated to +100 ℃. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m 또는 8 중?

어떤 규칙을 의미하는지 말해보세요. 에이 4 m 유효 길이는 8 m 루프. For a vertical or choked lift the effective length is the distance from hook to load; 바구니를 위해, 헤드룸에 하중 둘레를 추가하고 이를 인용합니다..

슬링과 함께 제공되는 문서?

A sewn label carrying the WLL, 길이와 일련번호; 해당 일련번호와 일치하는 검증 기록; 요청 시 섬유 인증서 및 배치 수치 제공. 귀하의 시장에 특정 표준 표시가 필요한 경우 주문 전에 알려주십시오..

Can the sleeve be replaced or repaired?

아니요. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

요청 50 t 라운드 슬링 견적

Send the lift, get a drawing and a price

다리당 하중, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

유효 길이 또는 둘레, 환경, and any sleeve or marking requirement.

Send your lifting details for a quotation →

리프트 슬링 리깅 주식회사, Ltd · Lifute 산업 단지, 타이저우, 장쑤성, 중국 · HS 코드 630790 · Tel +86 523 8693 5818 · 왓츠앱 +86 180 6600 2268

관련상품

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

리프트 슬링 장비 회사 · Lifute Industrial Park, 타이저우시, 장쑤성, 중국 · HS 코드 630790
전화 +86 523 8693 5818 · 왓츠앱 +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

메시지를 남겨주세요

맨 위로 스크롤