Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Тонна дөңгелек итарқа.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 аяғына кг және 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

Біз оны құрастырамыз 1 м дейін 30 м тиімді ұзындық, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, сондықтан қалтадағы сертификат жәшіктегі итарқаға тиесілі. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the дөңгелек ілмек диапазон. The tier below is the 40 тонна дөңгелек итарқа; the tier above is the 60 тонна дөңгелек итарқа. For the whole heavy series see heavy duty round slings.

Не 50 t figure actually buys you
The number on the sleeve is the working load limit of бір аяқ, тігінен ілулі. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Екі реттеу бір аяқты фигураны белгіленген фигураға айналдырады, and both of them move it.
- Режим. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- Аяқтың бұрышы. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, өйткені нақты жүк ешқашан толық симметриялы отырмайды.
| Конфигурация | Фактор | Сыйымдылығы |
|---|---|---|
| Бір ілмек, тік | × 1.0 | 50 т |
| Бір ілмек, тұншығып қалды | × 0.8 | 40 т |
| Бір ілмек, basket at 0–7° | × 2.0 | 100 t on the sling |
| Бір ілмек, basket at 7–45° | × 1.4 | 70 t on the sling |
| Бір ілмек, basket at 45–60° | × 1.0 | 50 т |
| Екі ілмек, 0тік жақтан –45° | × 1.4 | 70 t орнату |
| Төрт ілмек, 0тік жақтан –45° | × 2.1 | 105 t орнату |
Кестені жүктемеден кері қарай оқыңыз. А 50 t екі аяққа жүктеме қажет 50 t итарқалар 0–45° (70 t орнату) және 60 t slings once the legs pass 45°. Екі 30 t итарқалар жасамайды 60 т, and two 40 т итарқалар тасымалдайды 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Қайда 50 t sits against the tiers either side
At this size the sling is rarely the weak link: ілмек, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Слинг | Тік, бір аяқ | Two legs at 0–45° | Қашан таңдалады |
|---|---|---|---|
| 30 т | 30 т | 42 т | Up to about 40 t екі аяққа, маржамен |
| 40 т | 40 т | 56 т | 45–55 t on two legs at a moderate angle |
| 50 т | 50 т | 70 т | 55–65 t on two legs, or unknown weights |
| 60 т | 60 т | 84 т | Legs opening past 45° on a 50–60 t load |
Жалғыз 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
The core carries the load, the sleeve decides the life
Дөңгелек итарқа - бірде екі мақала, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, балауызданған және бұралмай төселген; every filament shares the load, which is how a body this slim rates at 50 т. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: кесу, тырнақтар, жылтырату, химиялық бояу, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Heavy duty is a build, рейтинг емес
The phrase describes the sleeve and the standard of make. А 50 t итарқа болып табылады 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the қос жеңді дөңгелек итарқа — on a clean indoor lift it is money spent on nothing.

A stiff body needs room
А 50 t body does not bend round a tight radius the way a 10 t one does. Жұмыс ережесі ретінде, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Тығыз геометрия әдетте ұзын денемен жауап береді, а көтеру арқалығы аяқтарды вертикальға жақындату үшін, немесе а көзі бар дөңгелек ілмек өлшенген ұзындыққа жасалады.
Техникалық параметрлер
| Параметр | Техникалық сипаттама |
|---|---|
| Өнім | 50 t heavy duty polyester lifting sling, шексіз дөңгелек итарқа, 50,000 кг дөңгелек көтергіш итарқа |
| Құрылыс | Тоқылған құбырлы жеңдегі үздіксіз параллель жіп өзегі, шексіз циклге жабылды; жүк жолында металл жоқ |
| Негізгі | Жоғары төзімді полиэфир (PES) көп талшықты, параллель төсеу, балауызданған |
| Жең | Ауыр тоқылған беріктігі жоғары полиэфир, стандартты ретінде бір қабат; тапсырыс бойынша қос жең |
| Жұмыс жүктемесінің шегі | 50,000 кг (50 т), жалғыз аяқ, тік |
| Бұзылатын жүктеме | 350,000 кг а 7:1 фактор |
| Қауіпсіздік факторы | 7:1 стандарт ретінде; нарық талап ететін тапсырыс бойынша өндірілген басқа факторлар |
| WLL кезінде созылу | Approximately 2–3 % |
| Қызмет көрсету температурасы | −40 °C дейін +100 °C |
| Тиімді ұзындық | 1–30 m made to order; ең аз ұзындық осы сыйымдылыққа қолданылады |
| Түс | Стандартты қызғылт сары; тапсырыс бойынша жеңдердің басқа түстері |
| Белгілеу | Жеңде басып шығарылған WLL және ұзындығы; WLL бар тігілген жапсырма, ұзындығы, сериялық, стандарты мен күні |
| Стандартты | IN 1492-2 және ASME B30.9 құрылыс тәжірибесі |
| Тестілеу | Жіберу алдында жүктелген дәлелдеме; сериялық нөмірге сәйкес келетін сынақ жазбасы |
| Қаптама | Поли қапшықтағы катушкалар, таңбаланған картон; сұраныс бойынша паллет немесе жәшік |
| MOQ & OEM | Сынақ тапсырысы үшін төмен MOQ; Ұзындығы бойынша OEM, жең түсі, негізгі талшық, жапсырманың орналасуы және орау |
Ұзындығы: тиімді ұзындық немесе шеңбер
Шексіз итарқаның ұшы жоқ, so its length can be quoted two ways and the two are a factor of two apart. Бұл дөңгелек итарқадағы ең көп тараған тапсырыс қатесі, және сағат 50 t Оқиғадан кейін түзету қымбат.
| ретінде келтірілді | Сіз аласыз | үшін пайдаланылады |
|---|---|---|
| Тиімді жұмыс ұзақтығы | Айналаның жартысы - жүкке іліңіз және сақтық көшірме жасаңыз | Тік және тұншықтырылған көтергіштер, онда ілу биіктігі белгілі |
| Айналым | Толық цикл ұзындығы | Себет көтергіштері, мұндағы жүктің шеңбері ұзындықты басқарады |
А 4 м тиімді ұзындық – a 8 m цикл. On our slings the figure printed on the sleeve is the effective length, сондықтан басып шығару мен дәйексөз әрқашан сәйкес келеді. Себет көтеру үшін, жүктің шеңберін алыңыз, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, бұл кішірек итарқа сатып алумен бірдей.
Белгілеу, serial and proof-load traceability
Жоғарыда 10 t the colour code stops identifying the sling, осылайша 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- Тігілген жапсырмада WLL бар, ұзындығы, сериялық, стандарты және шығарылған күні; сериялық - бұл физикалық итарқаны оның құжаттарымен байланыстыратын нәрсе.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- Талшық сертификаты мен партия сандары сұраныс бойынша қол жетімді; if your market needs a specific standard marking, say so before the order rather than after.

Қай жерде а 50 t sling earns its place
At this capacity the sling is chosen for what it does емес do to the load — a wire rope grommet carries the same figure. The difference is contact.
- Құрама арқалықтар мен көпір сегменттері. Әр ұшында бір итарқа, арқалық көтерілген деңгей; the sleeve protects the formed face and the chamfer.
- Steel coils and plate packs. Пакет астындағы себет, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Трансформаторлар, generators and machine beds. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Кеме және модуль блоктары. Жоғарыда сәулесі бар төрт нүкте, мұндағы итарқа бұрышы жиынды анықтайтын айнымалы.


Тексеру, күтім және зейнеткерлікке шығу
Әрбір қолданар алдында тексеріңіз, және ресми түрде сіздің режиміңіз талап ететін аралықта. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: кесу, тырнақтар, жылтырату, melts, химиялық бояу.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Белгілеу және басып шығару: WLL немесе ұзындықты енді оқу мүмкін болмаса, итарқаны тексеру мүмкін емес.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, жылумен жылтырату, қатты немесе түйіршіктелген өзек, chemical attack or a missing label.
- Шиыршық күйінде және еденнен тыс жерде сақтаңыз, күндізгі жарықтан және ыстықтан алыс, еріткіштер және дәнекерлеу шөгінділері; ілмектерді ешқашан жабық қапшықта дымқыл сақтамаңыз, and never drag one under load.
Жиі сұралатын
Can one 50 t итарқа көтергіш 100 t себетке?
Иілгіш жағында, иә - 100 t 0–7°. Іс жүзінде ілмек, Негізгі сілтеме немесе оның үстіндегі сәуле де бағалануы керек 100 т, және мұндай өлшемде кран әдетте жоқ. Сондықтан себет 50 t - біріншіден ұстанатын шешім, ал екіншіден, қабілеттілік туралы шешім.
Do two 50 t ілмектерді көтеру 100 т?
Not at an angle. Two legs at 0–45° from vertical carry 70 т, және 50 t once the legs open past 45°. A genuine 100 t екі аяққа жүктеме қажет 75 т итарқалар, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: төмен созылу, жақсы тозу мерзімі, −40 дейін +100 °C, lowest cost at this rating. А UHMWPE өзегі is worth it where the sling’s own weight is the problem — long bodies, жоғары таңдаулар, немесе баспалдақпен көтерілу керек итарқа.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 м немесе 8 м?
Қай конвенцияны айтып тұрғаныңызды айтыңыз. А 4 м тиімді ұзындық – a 8 m цикл. For a vertical or choked lift the effective length is the distance from hook to load; себет үшін, жүктің шеңберін үстіңгі орынға қосыңыз және оны келтіріңіз.
Слингпен бірге қандай құжаттама бар?
A sewn label carrying the WLL, ұзындығы және сериясы; осы серияға сәйкес келетін тексеру жазбасы; талшық сертификаты және сұраныс бойынша партия сандары. Сіздің нарыққа нақты стандартты таңбалау қажет болса, тапсырыс алдында бізге айтыңыз.
Can the sleeve be replaced or repaired?
Жоқ. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Сұраныс a 50 t дөңгелек итарқа баға белгілеу
Send the lift, get a drawing and a price
Аяққа жүктеме, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Тиімді ұзындық немесе шеңбер, қоршаған орта, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute индустриялық паркі, Тайчжоу, Цзянсу, Қытай · HS коды 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Қатысты өнімдер
- Барлық дөңгелек итарқалар, 1–1000 т — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T полиэфирден жасалған дөңгелек итарқалар — for 40 t loads on two legs;
- 60 тонна дөңгелек итарқа — the tier above;
- Heavy duty round sling range — 50 t және одан жоғары, heavier sleeves;
- Көздері бар дөңгелек ілмек — a measured length and two pick-up points;
- Тегіс ілмек — the same rating in a thinner profile;
- Көтергіш арқалықтар — to keep multi-leg sets closer to vertical.
