Өнімдер санаттары

Heavy Duty Nylon Flat Webbing Cargo Net

Қысқаша сипаттама:

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Нейлон жалпақ тоқыма торы,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Heavy duty nylon flat webbing cargo net: soft wide-face lifting to tens of tonnes, 7:1 фактор, 25-100 мм жолақтар, басылған WLL. No wire to dent the cargo.

Өнімнің егжей-тегжейі

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Нейлон жалпақ тоқыма торы,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Cargo lifting net · nylon flat webbing · heavy duty

Heavy Duty Nylon Flat Webbing Cargo Net

An open lattice of flat high-tenacity nylon bands that lifts like a wire rope net, weighs a fraction of one, and leaves the cargo unmarked.

0.5–10 t стандартты, 7:1 дейін 50 т тапсырыс бойынша салынған 25– 100 мм жолақ ені 100 мм шаршы тор
Heavy duty nylon flat webbing cargo net laid out, апельсин 100 mm mesh lattice with four corner loops

A heavy duty nylon flat webbing cargo net is an open lattice of flat high-tenacity nylon bands, stitched into a square mesh with a folded double-stitched border and reinforced lifting loops at the corners. The load sits inside the mesh and is carried across the full width of every band beneath it. Because the bearing face is a flat band rather than a steel rope, the net presses on the cargo over a wide area and leaves paint, қаптау, bagging and machined faces as it found them.

Lift Sling Rigging компаниясы топты тоқиды, stitches the net and proof-tests every one in Taizhou, Цзянсу. Band width runs from 25 мм-ге дейін 100 мм, тордан 50 мм-ге дейін 300 мм, and the rated capacity of a single net from 0.5 т дейін 10 t стандартты ретінде, with heavy-duty nets built to order well beyond that — the tens-of-tonnes class is a build, not a catalogue item.

Қысқа нұсқасы. Standard certified range 0.5–10 t at 7:1. Above that the net is built to order: wider or duplex bands, more lifting points, a spreader beam in the assembly — and its working load limit comes off the test bed, per net, not off a table.

Неліктен нейлон, and why flat webbing

Three things separate this construction from a rope net: the shape of the bearing face, талшық, and the way the load is shared.

  • Жалпақ жолақ, кең бет. А 50 mm band lies against the cargo along its whole width. A wire rope touches on a line a few millimetres wide and concentrates everything into it — that is what dents a painted panel or bursts a paper sack.
  • Nylon takes the shock. Нейлон (PA) stretches further before it parts than polyester, so a load that lands or swings is absorbed rather than transmitted to the hook. Where the lift is a steady, repetitive crane cycle, polyester is the lower-stretch choice; where the cargo is slammed down on a quay, nylon is the more forgiving net.
  • Load shared across the lattice. Every band under the load carries a share, so the net does not depend on four hard points. That is also why the same net can hold a bag stack, a pallet of bricks or a bundle of plate without repacking it.
Nylon flat webbing cargo net spread on the ground showing the reinforced border and lifting loops
The same net laid flat: folded double-stitched border round the perimeter, lifting loops stitched through it.

What “tens of tonnes” actually means

А 30 t net is not a 3 t net made bigger. Capacity is built up from four things, and each of them has to move together:

Кесте 1 — How the build changes with the load
Load band Топ / салу Тор Көтеру нүктелері What else changes
0.5 – 2 т 25–50 mm single layer 50– 100 мм 4 corners One-person handling, light cargo, bags and small parts
2 – 5 т 50 mm single layer, қос тігісті жиек 100 мм 4 corners The standard port and warehouse net
5 – 10 т 50–75 мм, duplex bands on the load-bearing run 100 мм 4 corners, 8 сұраныс бойынша Heavier border, reinforced loops, thicker stitch pattern
10 – 30 т 75–100 mm duplex, band count set by the load face 100– 150 мм 8 points Spreader beam or master link in the assembly; net built to drawing
30 t және одан жоғары 100 mm duplex or multi-layer, band spacing engineered to the load 150– 200 мм 8 points or more Built and proof-tested to the lift, certificate per net

Load bands and build steps are our standard practice; the rating of any net above 10 t is fixed by its own proof test, and we quote it from that certificate.

The arithmetic behind it is plain: a band has a certified strength, the load face has a known number of bands beneath it, and the assembly is rated at the lowest of the band run, the corner loops, the master link and the sling above it. Add bands, widen them, double them, and the net grows; but the corner loops and the hardware have to grow with it, which is why the big nets are designed as a whole rather than bought by the metre.

Flat webbing against wire rope

This is the comparison buyers usually arrive with, and it is worth stating plainly — including where the wire net still wins.

Кесте 2 — What changes when the net is webbing instead of wire
Нейлоннан жасалған жалпақ тор Wire rope cargo net
Contact with the cargo Жалпақ жолақ, кең бет, таңбаланбау Line contact, marks and dents
Effect on packaging Paper sacks, cartons and shrink wrap survive Sacks burst, cartons crush at the rope line
Салмағы One person carries and folds a 2.5 × 2.5 m net Needs two people and lifting gear
Коррозия Тотсыз, suited to quays and offshore decks Needs galvanised or stainless rope
Edge and cut resistance Жақсы, but sharp plate and flame need a sleeve or pad Very high — the reason wire nets survive scrap yards
Жөндеу Re-stitch or replace a band; no swaging Cut and re-splice by a rigger
Handling noise and injury risk Quiet, no wire spikes Loud, and wire spikes cut gloves
Webbing cargo net rigged across a container opening to retain the load
Rigged in a container: the same lattice restrains as well as it lifts.

Техникалық сипаттама

The table is the standard nylon flat webbing net. Жолақ ені, қабат саны, тор, таза өлшем, lifting points and printing are all made to order, so read it as the starting point for a quotation rather than a fixed catalogue.

Кесте 3 — Heavy duty nylon flat webbing cargo net
Параметр Техникалық сипаттама
Түр Open flat webbing lattice, no closed bottom; four or eight lifting points
Топтық материал 100 % жоғары берік нейлон (PA); полиэфир (ПЕТ) немесе полипропилен (PP) сұраныс бойынша
Жолақ ені 25 / 30 / 50 / 75 / 100 мм
Жолақ қалыңдығы 1.5 – 3.2 мм еніне байланысты
Жолақ қабаты Бойдақ, немесе дуплексті (қос қабат) for abrasion resistance and higher capacity
Торды ашу 50 – 300 мм; 100 × 100 мм стандартты
Mesh form Square (стандартты) or diamond on request
Таза өлшем 1.0 × 1.0 м дейін 4.0 × 4.0 м стандартты; 2.5 × 6 m and any size to drawing
Номиналды сыйымдылық 0.5 – 10 t стандартты; heavier nets built to order and rated from their own proof test
Қауіпсіздік факторы 7:1
Жиектер мен бұрыштар Folded double-stitched border; reinforced lifting loops, four or eight
Түс Қызғылт сары жоғары көріну стандарты; көк, қара, жасыл немесе әдеттегі
Емдеу UV-resistant and anti-aging; abrasion-resistant finish
Жұмыс температурасы −40 °C дейін +100 °C (полиэфир); nylon lower at the top end — tell us the duty
Белгілеу WLL, таза өлшем, mesh and date stitched on a label; WLL and brand printable on the band
Сертификаттау CE / Г.С / ОЛ / ISO 9001 жұмыс істейді; breaking-load test on our own 1000 т машина
HS коды 630790

Стандартты өлшемдер

Кесте 4 — Nets we build most often
Таза өлшем Типтік сыйымдылық Typical load
1.0 × 1.0 м 0.5 – 2 т Машина бөлшектері, барабандар, small pallets
2.5 × 2.5 м 2 – 5 т Палеттелген және қапталған жүк, container work
2.5 × 6 м 4 – 10 т Ұзын жүк, pipe and plate bundles, truck beds
4.0 × 4.0 м 5 – 10 т Жаппай сөмкелер, stacked sacks, палубалық жүк
Сурет салу үшін салынған 10 t and well above Hold, flat rack, spreader and plant dimensions
Flat nylon webbing cargo net with square mesh ready for a palletised load
A pallet-sized net: laid out, load set down, four loops on the hook — no strapping of individual pieces.

Where the soft face pays for itself

  • Painted and coated steel — plate packs, coated tube, galvanised sections: no rope line to score the finish.
  • Bagged and boxed cargo — fertiliser, цемент, астық, resin: the flat band does not cut into the bag.
  • Machined and plated parts — no dent, no wire mark, no rework before dispatch.
  • Marine and offshore transfer — rust-free, UV-treated, quiet on a moving deck.
  • Container stuffing and de-stuffing — light enough to pull around the cargo and fold away afterwards.
Flat webbing cargo net lifting a stack of bagged goods from its four corner loops
Lifting bagged goods: the weight is carried across every band under the load, not on four contact points.

It is not the right tool everywhere, and it is worth saying so: a webbing net is not a scrap-yard net. Sharp plate edges, torn steel and hot slag will cut or burn a band. Where the cargo is sharp, the net is supplied with edge sleeves or a heavier wear band, and the sleeves are inspected with the net.

Rigging it so the load stays inside the mesh

  • Lay the net out flat, set the load down inside the mesh and keep it clear of the border — the border is stitch, not bearing face.
  • Gather all the lifting loops onto the hook, master ring or spreader; never lift on fewer loops than the net was built with.
  • With eight points, use a spreader or two matched slings so the load is shared evenly; a net pulled from four points only will lift less than its rating allows.
  • Square the mesh under the load before taking up slack, so the bands line up with the load face instead of pulling diagonally.
  • Never drag a load sideways with the net, and never use it as a tow or lashing substitute for a load it was not rated for.

Белгілеу, басып шығару және сәйкестендіру

Every net leaves with a sewn label carrying the working load limit, таза өлшем, the mesh and the date. On top of that the band itself can be printed — WLL, net number, fleet code and your own brand — which matters where a yard runs a hundred nets and needs to know at a glance which one is which, and where an inspector needs the rating without hunting for a tag.

Тексеру және зейнетке шығу

  • Read the label before the lift and confirm the load is inside the rating for the way the net is rigged.
  • Check every load-bearing band for cuts, абразия, химиялық бояу, heat glazing and broken stitching; check the border and the loops most carefully — that is where wear starts.
  • Check the printing is still legible: an unreadable WLL is a net out of service.
  • Retire the net if a band, the border or a loop is damaged, or if the mesh has been distorted by an overload. Never knot, weld or heat-repair a webbing net.
  • Таза және құрғақ сақтаңыз, жерден және тікелей күн сәулесінен, and have the net examined by a competent person at the interval your site sets.
Corner detail of a flat webbing cargo net showing the double-layer border and reinforced corner loop
Бұрыштық деталь: two-layer stitched border and the reinforced loop the hook or master ring lifts from — the first place a net wears.

Жиі сұралатын

Can a webbing net really lift tens of tonnes?

Иә, as a build rather than a stock item. Bands get wider and duplex, the band count under the load face goes up, lifting points go from four to eight, and a spreader or master link joins the assembly. Each net of that class is proof-tested and its WLL is taken from the test, so ask for the certificate rather than a catalogue figure.

Will it mark painted or galvanised cargo?

No — that is the main reason buyers move from wire rope to webbing. The band presents a flat, soft face over its full width; a wire net concentrates the same load on a line a few millimetres wide. What a webbing net will not tolerate is a sharp edge, which is what the sleeves are for.

Nylon or polyester?

Nylon for shock and impact — slamming a load down, rough quay handling, cargo that swings. Polyester where the lift is steady and repetitive and you want the least stretch under load. Polypropylene for wet or chemical duty and where weight matters most.

What mesh should I take?

100 × 100 mm covers bags, кірпіш, жәшіктер, drums and small components. Go smaller (50–75 мм) for loose small parts, and larger (150– 200 мм) on big heavy nets where band strength matters more than containment.

How is the capacity proven?

Every net is breaking-load tested on our own 1000 t machine and supplied with a capacity label and a material test report; our works hold CE, Г.С, JIS and ISO 9001 сертификаттау, and the test facilities are CNAS and DNV recognised.

Can you print our brand and the WLL on the band?

Иә. WLL, таза өлшем, fleet number and your own brand can be printed along the band, with a sewn label as well. That is the usual request from distributors and from yards that run a fleet of nets.

Баға ұсынысын сұрау

Жүкті жіберіңіз, not just a size

The cargo — what it is, ол қалай оралған, and its weight as presented for the lift;

The load face — length × width, and whether the net must contain it or only hold it together;

The lifting arrangement — four or eight points, ілмек, master ring or spreader, and the sling above;

The environment — quay, контейнер, offshore deck, or a coated and painted product;

The paperwork — CE marking, test report and own-brand printing if you need them.

Send the load and the net size for a quotation →

Әрі қарай қайда бару керек

Lift Sling такелаждық компаниясы · Лифут индустриалды паркі, Тайчжоу қаласы, Цзянсу провинциясы, Қытай · HS коды 630790
Тел +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Хабарламаңызды қалдырыңыз

Жоғарыға жылжытыңыз