Categorie di prodotti

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Breve descrizione:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonnellata di imbracatura rotonda.

50 t heavy duty polyester endless round sling: 50,000 kg per gamba, 350,000 kg a 7:1, nessun metallo nel percorso di carico. Realizzato su misura, proof loaded to EN 1492-2.

Dettagli del prodotto

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonnellata di imbracatura rotonda.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 T WLL per leg 350 T carico di rottura 1–30 m lunghezza effettiva 7:1 fattore di sicurezza
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

UN 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Non ci sono fini, senza occhi, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Lo costruiamo da 1 m a 30 m effective length, manica singola o doppia, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the fionda rotonda allineare. The tier below is the 40 tonnellata di imbracatura rotonda; the tier above is the 60 tonnellata di imbracatura rotonda. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
UN 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Che cosa 50 t figure actually buys you

The number on the sleeve is the working load limit of una gamba, appeso verticalmente. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
Tavolo 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 fattori modali)
Configurazione Fattore Capacità
Una fionda, verticale × 1.0 50 T
Una fionda, soffocato × 0.8 40 T
Una fionda, cestello a 0–7° × 2.0 100 t on the sling
Una fionda, cestello a 7–45° × 1.4 70 t on the sling
Una fionda, cestello a 45–60° × 1.0 50 T
Due fionde, 0–45° dalla verticale × 1.4 70 t impostare
Quattro fionde, 0–45° dalla verticale × 2.1 105 t impostare

Read the table from the load backwards. UN 50 t caricare su due gambe 50 t slings at 0–45° (70 t impostare) E 60 t slings once the legs pass 45°. Due 30 t slings do not make 60 T, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Dove 50 t sits against the tiers either side

At this size the sling is rarely the weak link: il gancio, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tavolo 2 — Single-leg rating against what a pair actually carries
Fionda Verticale, una gamba Two legs at 0–45° Chosen when
30 T 30 T 42 T Up to about 40 t on two legs, with margin
40 T 40 T 56 T 45–55 t on two legs at a moderate angle
50 T 50 T 70 T 55–65 t on two legs, or unknown weights
60 T 60 T 84 T Legs opening past 45° on a 50–60 t load

Un singolo 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Un'imbragatura rotonda è composta da due articoli in uno, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, cerato e posato senza torsione; every filament shares the load, which is how a body this slim rates at 50 T. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: tagli, intoppi, vetri, colorazione chimica, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, non una valutazione

The phrase describes the sleeve and the standard of make. UN 50 la fionda è 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the fettuccia rotonda a doppia manica — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, manica in tessuto arancione, vista dello studio
Niente metallo, senza fine, no stitching in the load path — the loop is the sling.

A stiff body needs room

UN 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, UN trave di sollevamento to bring the legs closer to vertical, o a fionda rotonda con occhi made to a measured length.

Parametri tecnici

Tavolo 3 — 50 t heavy duty polyester round sling, specificazione standard
Parametro Specifica
Prodotto 50 t heavy duty polyester lifting sling, fionda rotonda infinita, 50,000 Imbracatura di sollevamento rotonda da kg
Costruzione Continuous parallel filament core in a woven tubular sleeve, chiuso in un ciclo infinito; nessun metallo nel percorso di carico
Nucleo Poliestere ad alta tenacità (PES) multifilamento, disposizione parallela, cerato
Manica Heavy duty woven high-tenacity polyester, singolo strato come standard; doppia manica su ordinazione
Limite del carico di lavoro 50,000 kg (50 T), gamba sola, verticale
Carico di rottura 350,000 kg a 7:1 fattore
Fattore di sicurezza 7:1 di serie; altri fattori prodotti su ordinazione laddove il mercato lo richiede
Allungamento al WLL Approximately 2–3 %
Temperatura di servizio Da −40 °C a +100 °C
Lunghezza effettiva 1–30 m made to order; minimum length applies at this capacity
Colore Arancione di serie; altri colori delle maniche su ordinazione
Marcatura WLL and length printed on the sleeve; etichetta cucita con WLL, lunghezza, seriale, norma e data
Standard IN 1492-2 e pratica di costruzione ASME B30.9
Test Prova caricata prima della spedizione; test record matched to the serial number
Imballaggio Avvolgere in un sacchetto di polietilene, cartone etichettato; pallet o cassa su richiesta
MOQ & OEM MOQ basso per un ordine di prova; OEM sulla lunghezza, colore della manica, fibra centrale, layout e imballaggio dell'etichetta
Body diameter and unit mass follow the length and the sleeve option, e sono riportati sul disegno allegato al preventivo. Sopra 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Lunghezza: effective length or circumference

Una fionda infinita non ha fine, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, e a 50 t it is an expensive one to correct after the event.

Tavolo 4 — The two length conventions
Citato come Ricevi Usato per
Lunghezza di lavoro effettiva Metà della circonferenza: agganciare il carico e risalire Sollevamenti verticali e soffocati, dove è nota l'altezza di sospensione
Circonferenza L'intera lunghezza del ciclo Sollevatori per cestelli, dove la circonferenza del carico determina la lunghezza

UN 4 m la lunghezza effettiva è an 8 ciclo m. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. For a basket lift, prendere la circonferenza del carico, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, che è come acquistare una fionda più piccola.

Marcatura, serial and proof-load traceability

Sopra 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, lunghezza, seriale, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: UN 12 il mio corpo, quoted by effective length.

Dove a 50 t sling earns its place

At this capacity the sling is chosen for what it does non do to the load — a wire rope grommet carries the same figure. The difference is contact.

  • Precast girders and bridge segments. One sling at each end, girder lifted level; il manicotto protegge la faccia sagomata e lo smusso.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Trasformatori, generatori e letti macchina. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Ispezione, care and retirement

Ispezionare prima di ogni utilizzo, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: tagli, intoppi, vetri, melts, colorazione chimica.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: if the WLL or the length can no longer be read, l'imbracatura non può essere verificata.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, smaltatura termica, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

Chiesto frequentemente

Can one 50 t sollevamento dell'imbracatura 100 t in un cestino?

On the sling side, SÌ - 100 t a 0–7°. In practice the hook, master link or beam above it also has to be rated for 100 T, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

Fatene due 50 t imbracature di sollevamento 100 T?

Not at an angle. Due gambe a 0–45° dalla verticale 70 T, E 50 t once the legs open past 45°. A genuine 100 t caricare su due gambe 75 t imbracature, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: basso allungamento, good abrasion life, −40 a +100 °C, lowest cost at this rating. UN Nucleo UHMWPE is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

Per quanto tempo ordino? 4 m o 8 M?

Di' quale convenzione intendi. UN 4 m la lunghezza effettiva è an 8 ciclo m. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, aggiungi la circonferenza del carico all'altezza libera e citalo.

Quale documentazione viene fornita con l'imbracatura?

A sewn label carrying the WLL, lunghezza e seriale; un record di prova abbinato a quel seriale; un certificato della fibra e dati sui lotti su richiesta. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

NO. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Richiedi un 50 t citazione dell'imbracatura rotonda

Send the lift, get a drawing and a price

Carico per gamba, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, l'ambiente, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Parco industriale di Lifute, Taizhou, Jiangsu, Cina · Codice HS 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Prodotti correlati

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Azienda di sollevamento con imbracatura · Lifute Industrial Park, Città di Taizhou, Provincia di Jiangsu, Cina · Codice HS 630790
tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Lascia il tuo messaggio

Scorri fino all'inizio