Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg lábonként és 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

Ebből építjük 1 m to 30 m effektív hossz, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, tehát a mappában lévő tanúsítvány a ládában lévő hevederhez tartozik. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the kerek heveder hatótávolság. The tier below is the 40 tonna kerek heveder; the tier above is the 60 tonna kerek heveder. For the whole heavy series see heavy duty round slings.

Mi a 50 t figure actually buys you
The number on the sleeve is the working load limit of egyik lábát, függőlegesen függő. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Két beállítással az egylábú figurát beállított figurává alakítja, and both of them move it.
- A mód. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- A láb szöge. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, mert a valódi teher sosem ül tökéletesen szimmetrikusan.
| Konfiguráció | Tényező | Kapacitás |
|---|---|---|
| Egy heveder, függőleges | × 1.0 | 50 t |
| Egy heveder, megfulladva | × 0.8 | 40 t |
| Egy heveder, basket at 0–7° | × 2.0 | 100 t on the sling |
| Egy heveder, basket at 7–45° | × 1.4 | 70 t on the sling |
| Egy heveder, basket at 45–60° | × 1.0 | 50 t |
| Két heveder, 0–45° függőlegestől | × 1.4 | 70 t meg |
| Four slings, 0–45° függőlegestől | × 2.1 | 105 t meg |
Read the table from the load backwards. A 50 t terhelés két lábon igény 50 t slings at 0–45° (70 t meg) és 60 t slings once the legs pass 45°. Két 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Ahol 50 t sits against the tiers either side
At this size the sling is rarely the weak link: a horgot, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Parittya | Függőleges, egyik lábát | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t on two legs, margóval |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
Egy szingli 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
The core carries the load, the sleeve decides the life
A kerek heveder két cikk egyben, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, viaszolva és csavarás nélkül lefektetve; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: vágások, gubancok, üvegezés, kémiai festés, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Heavy duty is a build, nem minősítés
The phrase describes the sleeve and the standard of make. A 50 t parittya az 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the dupla ujjú kerek heveder — on a clean indoor lift it is money spent on nothing.

A stiff body needs room
A 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a emelő gerenda to bring the legs closer to vertical, vagy a kerek heveder szemekkel made to a measured length.
Műszaki paraméterek
| Paraméter | Specifikáció |
|---|---|
| Termék | 50 t heavy duty polyester lifting sling, végtelen kerek heveder, 50,000 kg kerek emelőheveder |
| Építés | Folyamatos párhuzamos szálas mag szőtt csőhüvelyben, végtelen hurokba zárva; nincs fém a terhelési úton |
| Mag | Nagy szakítószilárdságú poliészter (PES) többszálú, párhuzamos fektetés, viaszos |
| Ujj | Heavy duty woven high-tenacity polyester, single layer as standard; dupla ujjú rendelésre |
| Üzemi terhelési korlát | 50,000 kg (50 t), egyetlen láb, függőleges |
| Törő terhelés | 350,000 kg at a 7:1 tényező |
| Biztonsági tényező | 7:1 szabvány szerint; other factors produced to order where the market requires |
| Megnyúlás WLL-nél | Approximately 2–3 % |
| Üzemi hőmérséklet | -40 °C-ig +100 °C |
| Hatékony hossz | 1–30 m made to order; minimum length applies at this capacity |
| Szín | Narancssárga alapkivitelben; egyéb karmantyú színek rendelésre |
| Jelzés | WLL és hosszúság az ujjra nyomtatva; varrott címke WLL-lel, hossz, sorozatszám, szabvány és dátum |
| Standard | IN 1492-2 és ASME B30.9 építési gyakorlat |
| Tesztelés | Feladás előtt betöltött bizonylat; a sorozatszámnak megfelelő vizsgálati jegyzőkönyv |
| Csomagolás | Tekercs egy polizsákban, feliratos karton; raklap vagy láda kérésre |
| MOQ & OEM | Alacsony MOQ próbarendeléshez; OEM a hosszon, ujjú szín, mag rost, címke elrendezése és csomagolása |
Hossz: effektív hossza vagy kerülete
Egy végtelen hevedernek nincs vége, so its length can be quoted two ways and the two are a factor of two apart. Ez a leggyakoribb rendelési hiba egy kerek hevedernél, és at 50 t az esemény utáni javítás költséges.
| mint | Ön kap | Használt |
|---|---|---|
| Hatékony munkahossz | A kerület fele – akassza le a terhelést, majd ismét fel | Függőleges és fojtott emelők, ahol ismert a függesztési magasság |
| Kerület | A teljes hurok hossza | Kosáremelők, ahol a teher kerülete hajtja a hosszt |
A 4 m effektív hossza egy 8 m hurok. On our slings the figure printed on the sleeve is the effective length, így a nyomtatás és az idézet mindig megegyezik. Kosáremelőhöz, vegye a teher kerületét, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, ami megegyezik egy kisebb heveder vásárlásával.
Jelzés, serial and proof-load traceability
Felett 10 t the colour code stops identifying the sling, tehát at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- Egy varrott címke hordozza a WLL-t, hossz, sorozatszám, szabvány és a gyártás dátuma; a sorozat az, ami összeköti a fizikai hevedert a papírmunkával.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- Igény esetén száltanúsítvány és tételszámok állnak rendelkezésre; if your market needs a specific standard marking, say so before the order rather than after.

Ahol a 50 t sling earns its place
At this capacity the sling is chosen for what it does nem do to the load — a wire rope grommet carries the same figure. A különbség az érintkezés.
- Precast girders and bridge segments. One sling at each end, girder lifted level; a hüvely védi a kialakult arcot és a letörést.
- Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Transzformátorok, generátorok és gépágyak. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.


Ellenőrzés, care and retirement
Minden használat előtt ellenőrizze, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: vágások, gubancok, üvegezés, melts, kémiai festés.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Label and print: if the WLL or the length can no longer be read, a heveder nem ellenőrizhető.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, hőüvegezés, merevvé vagy csomóssá vált mag, chemical attack or a missing label.
- Feltekerve és a padlótól távol tárolandó, napfénytől és hőtől távol, oldószerek és hegesztési fröccsenések; soha ne tároljon nedves hevedert zárt zacskóban, and never drag one under load.
Gyakran kérdezik
Can one 50 t hevederemelő 100 t egy kosárban?
On the sling side, igen – 100 t 0-7°-on. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.
Csinálj kettőt 50 t hevederek emel 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, és 50 t once the legs open past 45°. A genuine 100 t terhelés két lábon igény 75 t hevederek, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: alacsony nyúlás, jó kopásállóság, −40 to +100 °C, lowest cost at this rating. A UHMWPE mag is worth it where the sling’s own weight is the problem — long bodies, magas csákányok, vagy egy heveder, amit fel kell vinni egy létrán.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m vagy 8 m?
Mondja el, melyik egyezményre gondol. A 4 m effektív hossza egy 8 m hurok. For a vertical or choked lift the effective length is the distance from hook to load; egy kosárért, add hozzá a teher kerületét a belmagassághoz, és idézd azt.
Milyen dokumentáció jár a hevederhez?
A sewn label carrying the WLL, hossza és sorozata; az adott sorozathoz illesztett próbabetöltési rekord; szál tanúsítványt és tételszámokat kérésre. Mondja el nekünk a megrendelés előtt, ha piacának szüksége van egy speciális szabványos jelölésre.
Can the sleeve be replaced or repaired?
Nem. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Kérés a 50 t round sling quotation
Send the lift, get a drawing and a price
Lábonkénti terhelés, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Effective length or circumference, a környezet, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Kína · HS kód 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Kapcsolódó termékek
- Minden körben hevederek, 1– 1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T poliészter kerek hevederek — for 40 t loads on two legs;
- 60 tonna kerek heveder — the tier above;
- Heavy duty round sling range — 50 t és felette, heavier sleeves;
- Kerek heveder szemekkel — a measured length and two pick-up points;
- Lapos hevederes heveder — the same rating in a thinner profile;
- Emelőgerendák — to keep multi-leg sets closer to vertical.
