उत्पाद श्रेणियाँ

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

संक्षिप्त वर्णन:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 टन गोल स्लिंग.

50 t heavy duty polyester endless round sling: 50,000 प्रति पैर किलो, 350,000 किलो पर 7:1, लोड पथ में कोई धातु नहीं. लम्बाई में बनाया गया, proof loaded to EN 1492-2.

उत्पाद विवरण

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 टन गोल स्लिंग.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 टी WLL per leg 350 टी ब्रेकिंग लोड 1-30 मी प्रभावी लंबाई 7:1 सुरक्षा कारक
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

ए 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. There are no ends, कोई आँखें नहीं, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

हम इसे से बनाते हैं 1 मी से 30 m effective length, सिंगल या डबल आस्तीन, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the गोल स्लिंग श्रेणी. The tier below is the 40 टन गोल स्लिंग; the tier above is the 60 टन गोल स्लिंग. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
ए 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

क्या 50 t figure actually buys you

The number on the sleeve is the working load limit of एक पैर, लंबवत लटका हुआ. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
मेज़ 1 — What one 50 t round sling carries, by arrangement (में 1492-2 मोड कारक)
विन्यास कारक क्षमता
एक गोफन, खड़ा × 1.0 50 टी
एक गोफन, चोक हो चुके × 0.8 40 टी
एक गोफन, टोकरी 0-7° पर × 2.0 100 t on the sling
एक गोफन, टोकरी 7-45° पर × 1.4 70 t on the sling
एक गोफन, टोकरी 45-60° पर × 1.0 50 टी
दो गोफन, 0-45° ऊर्ध्वाधर से × 1.4 70 टी सेट
चार गोफन, 0-45° ऊर्ध्वाधर से × 2.1 105 टी सेट

Read the table from the load backwards. ए 50 दो पैरों पर भार उठाने की जरूरत है 50 टी 0-45° पर स्लिंग करता है (70 टी सेट) और 60 t slings once the legs pass 45°. दो 30 टी स्लिंग्स नहीं बनाते हैं 60 टी, and two 40 टी स्लिंग्स ले जाना 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

कहाँ 50 t sits against the tiers either side

At this size the sling is rarely the weak link: हुक, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

मेज़ 2 — Single-leg rating against what a pair actually carries
गोफन खड़ा, एक पैर Two legs at 0–45° Chosen when
30 टी 30 टी 42 टी Up to about 40 दो पैरों पर टी, मार्जिन के साथ
40 टी 40 टी 56 टी 45–55 t on two legs at a moderate angle
50 टी 50 टी 70 टी 55–65 t on two legs, or unknown weights
60 टी 60 टी 84 टी Legs opening past 45° on a 50–60 t load

एक भी 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

कोर भार वहन करता है, the sleeve decides the life

A round sling is two articles in one, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, बिना मोड़े वैक्स करके बिछाया गया; every filament shares the load, which is how a body this slim rates at 50 टी. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: कटौती, गड़बड़ी, ग्लेज़िंग, रासायनिक धुंधलापन, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

हेवी ड्यूटी एक निर्माण है, कोई रेटिंग नहीं

The phrase describes the sleeve and the standard of make. ए 50 टी स्लिंग है 50 चाहे आस्तीन कुछ भी हो; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the डबल आस्तीन गोल स्लिंग — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, नारंगी बुनी आस्तीन, स्टूडियो दृश्य
No metal, कोई अंत नहीं, no stitching in the load path — the loop is the sling.

कठोर शरीर को जगह की आवश्यकता होती है

ए 50 t शरीर किसी तंग त्रिज्या के चारों ओर a की तरह नहीं झुकता है 10 ऐसा कोई नहीं करता. एक कार्यशील नियम के रूप में, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. चुस्त ज्यामिति का उत्तर आमतौर पर लंबे शरीर से दिया जाता है, ए उठाने वाली किरण पैरों को ऊर्ध्वाधर के करीब लाने के लिए, या ए आंखों वाला गोल स्लिंग मापी गई लंबाई में बनाया गया.

तकनीकी मापदंड

मेज़ 3 — 50 t heavy duty polyester round sling, मानत विशिष्टताएँ
पैरामीटर विनिर्देश
उत्पाद 50 t heavy duty polyester lifting sling, अंतहीन गोल स्लिंग, 50,000 किलो गोल उठाने वाली स्लिंग
निर्माण एक बुने हुए ट्यूबलर आस्तीन में निरंतर समानांतर फिलामेंट कोर, एक अंतहीन पाश में बंद; लोड पथ में कोई धातु नहीं
मुख्य उच्च-दृढ़ता पॉलिएस्टर (पीईएस) multifilament, समानांतर रखना, वैक्सिंग
आस्तीन अत्यधिक टिकाऊ बुना हुआ हाई-टेनेसिटी पॉलिएस्टर, मानक के रूप में एकल परत; ऑर्डर करने के लिए डबल आस्तीन
कार्य भार सीमा 50,000 किग्रा (50 टी), एकल पैर, खड़ा
ब्रेकिंग लोड 350,000 ए पर किग्रा 7:1 कारक
सुरक्षा कारक 7:1 मानक रूप में; अन्य कारकों का उत्पादन ऑर्डर के अनुसार किया जाता है जहां बाजार की आवश्यकता होती है
डब्ल्यूएलएल पर बढ़ाव Approximately 2–3 %
सेवा तापमान -40°C से +100 डिग्री सेल्सियस
प्रभावी लंबाई 1–30 m made to order; इस क्षमता पर न्यूनतम लंबाई लागू होती है
रंग नारंगी मानक के रूप में; ऑर्डर करने के लिए आस्तीन के अन्य रंग
अंकन आस्तीन पर डब्लूएलएल और लंबाई मुद्रित; WLL के साथ सिला हुआ लेबल, लंबाई, धारावाहिक, मानक और तारीख
मानक में 1492-2 और एएसएमई बी30.9 निर्माण अभ्यास
परीक्षण प्रेषण से पहले सबूत लोड किया गया; परीक्षण रिकॉर्ड का सीरियल नंबर से मिलान किया गया
पैकिंग एक पॉली बैग में कुंडल, लेबल वाला कार्टन; अनुरोध पर फूस या टोकरा
MOQ & OEM परीक्षण आदेश के लिए कम MOQ; लंबाई पर OEM, आस्तीन का रंग, कोर फाइबर, लेबल लेआउट और पैकिंग
Body diameter and unit mass follow the length and the sleeve option, और कोटेशन के साथ जारी ड्राइंग पर दिखाए गए हैं. ऊपर 10 t the sleeve colour no longer encodes capacity — the print and the label do.

लंबाई: effective length or circumference

एक अंतहीन गोफन का कोई अंत नहीं है, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, और कम से 50 t it is an expensive one to correct after the event.

मेज़ 4 — The two length conventions
के रूप में उद्धृत किया गया है आपको प्राप्त हुया के लिए इस्तेमाल होता है
प्रभावी कार्य अवधि आधी परिधि - भार से नीचे की ओर हुक करें और पीछे से ऊपर की ओर झुकें खड़ी और बंद लिफ्टें, जहां पर फांसी की ऊंचाई का पता चल जाता है
परिधि पूर्ण लूप लंबाई टोकरी लिफ्ट, जहां भार का घेरा लंबाई को संचालित करता है

ए 4 m effective length is an 8 एम लूप. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. टोकरी लिफ्ट के लिए, भार का घेरा ले लो, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, जो एक छोटी स्लिंग खरीदने के समान है.

अंकन, serial and proof-load traceability

ऊपर 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, लंबाई, धारावाहिक, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: ए 12 एम शरीर, quoted by effective length.

जहाँ एक 50 t sling earns its place

At this capacity the sling is chosen for what it does नहीं do to the load — a wire rope grommet carries the same figure. The difference is contact.

  • प्रीकास्ट गर्डर और पुल खंड. प्रत्येक सिरे पर एक स्लिंग, गर्डर का स्तर उठाया गया; आस्तीन गठित चेहरे और कक्ष की रक्षा करता है.
  • Steel coils and plate packs. पैक के नीचे टोकरी, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • ट्रान्सफ़ॉर्मर, जनरेटर और मशीन बेड. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • जहाज और मॉड्यूल ब्लॉक. ऊपर एक बीम के साथ चार-बिंदु, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

निरीक्षण, care and retirement

प्रत्येक उपयोग से पहले निरीक्षण करें, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: कटौती, गड़बड़ी, ग्लेज़िंग, melts, रासायनिक धुंधलापन.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • लेबल करें और प्रिंट करें: if the WLL or the length can no longer be read, स्लिंग को सत्यापित नहीं किया जा सकता.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, ताप ग्लेज़िंग, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

अक्सर पूछे जाने वाले

Can one 50 टी स्लिंग लिफ्ट 100 एक टोकरी में टी?

स्लिंग की तरफ, हाँ - 100 0-7° पर. अभ्यास में हुक, इसके ऊपर मास्टर लिंक या बीम को भी रेट करना होगा 100 टी, और इस आकार में क्रेन आमतौर पर नहीं होती है. यही कारण है कि टोकरी पर 50 यह पहला पकड़ निर्णय है और दूसरा क्षमता निर्णय है.

Do two 50 टी स्लिंग्स लिफ्ट 100 टी?

Not at an angle. Two legs at 0–45° from vertical carry 70 टी, और 50 t once the legs open past 45°. A genuine 100 दो पैरों पर भार उठाने की जरूरत है 75 टी स्लिंग्स, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: कम खिंचाव, अच्छा घर्षण जीवन, −40 से +100 डिग्री सेल्सियस, lowest cost at this rating. ए UHMWPE कोर is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 डिग्री सेल्सियस. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 मी या 8 एम?

कहो आपका अभिप्राय किस सम्मलेन से है. ए 4 m effective length is an 8 एम लूप. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, add the girth of the load to the headroom and quote that.

स्लिंग के साथ कौन सा दस्तावेज़ आता है?

A sewn label carrying the WLL, लंबाई और क्रम; एक प्रूफ-लोड रिकॉर्ड उस सीरियल से मेल खाता है; अनुरोध पर एक फाइबर प्रमाणपत्र और बैच आंकड़े. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

नहीं. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

अनुरोध ए 50 टी राउंड स्लिंग उद्धरण

Send the lift, get a drawing and a price

प्रति पैर भार, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, पर्यावरण, and any sleeve or marking requirement.

Send your lifting details for a quotation →

लिफ्ट स्लिंग रिगिंग कंपनी, लिमिटेड · लाइफ़्यूट इंडस्ट्रियल पार्क, Taizhou, Jiangsu, चीन · एचएस कोड 630790 · Tel +86 523 8693 5818 · व्हाट्सएप +86 180 6600 2268

संबंधित उत्पाद

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

लिफ्ट स्लिंग रिगिंग कंपनी · Lifute Industrial Park, ताइझोउ शहर, ज्यांग्सू प्रांत, चीन · एचएस कोड 630790
टेलीफोन +86 523 8693 5818 · व्हाट्सएप +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

अपना संदेश छोड़ दें

शीर्ष तक स्क्रॉल करें