Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Rûne Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg per skonk en 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

Wy bouwe it út 1 m oan 30 m effective length, inkele of dûbele mouwe, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, sa heart it sertifikaat yn de map by de slinger yn de krat. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the rûne slinger berik. The tier below is the 40 tonne rûne slinger; the tier above is the 60 tonne rûne slinger. For the whole heavy series see heavy duty round slings.

Wat de 50 t figure actually buys you
The number on the sleeve is the working load limit of ien skonk, hingje fertikaal. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, want in echte lading sit nea perfekt symmetrysk.
| Konfiguraasje | Faktor | Kapasiteit |
|---|---|---|
| Ien slinger, fertikaal | × 1.0 | 50 t |
| Ien slinger, fersmoarge | × 0.8 | 40 t |
| Ien slinger, basket op 0-7° | × 2.0 | 100 t on the sling |
| Ien slinger, basket op 7-45° | × 1.4 | 70 t on the sling |
| Ien slinger, basket op 45-60° | × 1.0 | 50 t |
| Twa slingers, 0-45° fan fertikaal | × 1.4 | 70 t set |
| Fjouwer slingers, 0-45° fan fertikaal | × 2.1 | 105 t set |
Lês de tabel fan 'e lading efterút. IN 50 t load op twa skonken behoeften 50 t slingers op 0–45° (70 t set) en 60 t slings once the legs pass 45°. Twa 30 t slingers net meitsje 60 t, and two 40 t slingers drage 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Wêr 50 t sits against the tiers either side
At this size the sling is rarely the weak link: de heak, de boel, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Slinger | Fertikaal, ien skonk | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t op twa skonken, mei marzje |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
In single 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
De kearn draacht de lading, the sleeve decides the life
In rûne slinger is twa artikels yn ien, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed en lein sûnder twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: besunigings, snags, glazing, gemyske kleuring, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Swiere plicht is in build, gjin wurdearring
The phrase describes the sleeve and the standard of make. IN 50 t slinger is 50 t wat de mouwe; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the dûbele mouwe rûne slinger — on a clean indoor lift it is money spent on nothing.

In stive lichem hat romte nedich
IN 50 t lichem bûgt net om in strakke straal sa as a 10 t ien docht. As wurkregel, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Strakke mjitkunde wurdt meastal beäntwurde mei in langer lichem, in lifting beam om de skonken tichter by fertikaal te bringen, of a rûne slinger mei eagen makke op in mjitten lingte.
Technyske parameters
| Parameter | Spesifikaasje |
|---|---|
| Produkt | 50 t heavy duty polyester lifting sling, einleaze rûne slinger, 50,000 kg rûne tilsling |
| Konstruksje | Trochrinnende parallelle filament kearn yn in woven tubular sleeve, sletten yn in einleaze lus; gjin metaal yn 'e lading paad |
| Kearn | Hege sterkte polyester (PES) multifilament, parallel lizze, waxed |
| Sleeve | Heavy duty woven polyester mei hege sterkte, single laach as standert; dûbele mouwe te bestellen |
| Working load limyt | 50,000 kg (50 t), ien skonk, fertikaal |
| Breaking load | 350,000 kg oan a 7:1 faktor |
| Feiligens faktor | 7:1 as standert; oare faktoaren produsearre om te bestellen wêr't de merk fereasket |
| De wiziging yn' e WLL | Approximately 2–3 % |
| Service temperatuer | -40 °C oant +100 °C |
| Effektive lingte | 1–30 m made to order; minimale lingte jildt op dizze kapasiteit |
| Kleur | Oranje as standert; oare mouwkleuren te bestellen |
| Markearje | WLL en lingte printe op 'e mouw; genaaid label mei WLL, lingte, serial, standert en datum |
| Standert | YN 1492-2 en ASME B30.9 boupraktyk |
| Testen | Bewiis laden foar ferstjoeren; test record oerien mei it serial number |
| Packing | Coil yn in poly bag, labeled karton; pallet of krat op oanfraach |
| MOQ & OEM | Lege MOQ foar in proefbestelling; OEM op lingte, mouwe kleur, kearn fiber, label yndieling en packing |
Lingte: effektive lingte of omtrek
In einleaze slinger hat gjin einen, so its length can be quoted two ways and the two are a factor of two apart. Dit is de meast foarkommende bestelling flater op in rûne slinger, en by 50 t it is in djoere in korrizjearje nei it evenemint.
| Oanhelle as | Jo ûntfange | Wurdt brûkt foar |
|---|---|---|
| Effektive wurkjende lingte | De helte fan 'e omtrek - heakje nei de lading en werom omheech | Fertikale en fersmoarge liften, dêr't de hinghichte bekend is |
| Omtrek | De folsleine loop lingte | Basket liften, dêr't de omtrek fan 'e lading de lingte driuwt |
IN 4 m effektive lingte is in 8 m lulk. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. Foar in basket lift, nim de omtrek fan 'e lading, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, dat is itselde as it keapjen fan in lytsere slinger.
Markearje, serial and proof-load traceability
Boppe 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- In genaaid label draacht de WLL, lingte, serial, standert en datum fan produksje; de serial is wat de fysike slinger ferbynt mei syn papierwurk.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- In fiber sertifikaat en batch sifers binne beskikber op oanfraach; if your market needs a specific standard marking, say so before the order rather than after.

Wêr a 50 t sling earns its place
At this capacity the sling is chosen for what it does net do to the load — a wire rope grommet carries the same figure. It ferskil is kontakt.
- Prefabryken balken en brêgesegmenten. Ien slinger oan elk ein, girder opheft nivo; de mouwe beskermet it foarme gesicht en de ôfsnijing.
- Steel coils and plate packs. Basket ûnder it pak, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Transformers, generators en masine bêden. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Skip en module blokken. Fjouwerpunt mei in beam boppe, wêr't de slingerhoek de fariabele is dy't de set bepaalt.


Ynspeksje, soarch en pensjoen
Kontrolearje foar elk gebrûk, en formeel op it ynterval dat jo rezjym fereasket. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: besunigings, snags, glazing, melts, gemyske kleuring.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Label en printsje: as de WLL of de lingte net mear lêzen wurde kin, de slinger kin net ferifiearre wurde.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, waarmte glazing, in kearn dy't stiif of klonterich wurden is, chemical attack or a missing label.
- Bewarje spiraal en fan 'e flier, út deiljocht en fuort fan waarmte, oplosmiddels en weld spatter; nea bewarje in slinger wiet yn in sletten tas, and never drag one under load.
Faak frege
Can one 50 t slinger lift 100 t yn in koer?
Oan de slingerkant, Ja - 100 t op 0-7°. Yn 'e praktyk de heak, masterlink of beam dêrboppe moat ek beoardiele wurde 100 t, en op dizze grutte is de kraan meastentiids net. Dêrom is de koer by 50 t is in grip beslút earst en in kapasiteit beslút twadde.
Doch twa 50 t slingers lift 100 t?
Not at an angle. Twa skonken op 0–45 ° fan fertikale drager 70 t, en 50 t once the legs open past 45°. A genuine 100 t load op twa skonken behoeften 75 t slingers, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: lege stretch, goede abrasion libben, -40 oan +100 °C, lowest cost at this rating. IN UHMWPE kearn is worth it where the sling’s own weight is the problem — long bodies, hege picks, of in slinger dy't op in ljedder droegen wurde moat.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
Hokker lingte bestelle ik - 4 m of 8 m?
Sis hokker konvinsje jo bedoele. IN 4 m effektive lingte is in 8 m lulk. For a vertical or choked lift the effective length is the distance from hook to load; foar in koer, foegje de omtrek fan 'e lading ta oan 'e headroom en sitearje dat.
Hokker dokumintaasje komt mei de slinger?
A sewn label carrying the WLL, lingte en serial; in proof-load record oerienkomt mei dat serial; in fiber sertifikaat en batch sifers op oanfraach. Fertel ús foar de bestelling as jo merk in spesifike standertmarkearring nedich is.
Can the sleeve be replaced or repaired?
Nee. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Oanfraach a 50 t rûne slinger quote
Send the lift, get a drawing and a price
Lading per skonk, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Effektive lingte of omtrek, it miljeu, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Sina · HS koade 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Related produkten
- Allround slingers, 1-1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T polyester rûne slings — for 40 t loads on two legs;
- 60 tonne rûne slinger — the tier above;
- Heavy duty round sling range - 50 t en boppe, heavier sleeves;
- Rûne slinger mei eagen — a measured length and two pick-up points;
- Flat singels sling — the same rating in a thinner profile;
- Liftende balken — to keep multi-leg sets closer to vertical.
