Products Kategoryen

Heavy Duty Nylon Flat Webbing Cargo Net

Koarte Beskriuwing:

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Nylon Flat Webbing Net,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Heavy duty nylon flat webbing cargo net: soft wide-face lifting to tens of tonnes, 7:1 faktor, 25-100 mm bands, printe WLL. No wire to dent the cargo.

Produkt Detail

Lift sling rigging company produce Heavy Duty Nylon Flat Webbing Cargo Net,Nylon Flat Webbing Net,Nylon webbing cargo net,Flat Nylon Sling Lifting Net,Nylon Flat Webbing Netting,Heavy-Duty Cargo Bungee Net,Heavy-Duty Cargo Net with Ratchet,Polyester Webbing Cargo Lifting Net.

Cargo lifting net · nylon flat webbing · heavy duty

Heavy Duty Nylon Flat Webbing Cargo Net

An open lattice of flat high-tenacity nylon bands that lifts like a wire rope net, weighs a fraction of one, and leaves the cargo unmarked.

0.5–10 t standert, 7:1 nei 50 t boud op bestelling 25-100 mm band breedte 100 mm fjouwerkante mesh
Heavy duty nylon flat webbing cargo net laid out, oranje 100 mm mesh lattice with four corner loops

A heavy duty nylon flat webbing cargo net is an open lattice of flat high-tenacity nylon bands, stitched into a square mesh with a folded double-stitched border and reinforced lifting loops at the corners. The load sits inside the mesh and is carried across the full width of every band beneath it. Because the bearing face is a flat band rather than a steel rope, the net presses on the cargo over a wide area and leaves paint, plating, bagging and machined faces as it found them.

Lift Sling Rigging Company weeft de band, stitches the net and proof-tests every one in Taizhou, Jiangsu. Band width runs from 25 mm oan 100 mm, mesh fan 50 mm oan 300 mm, and the rated capacity of a single net from 0.5 t oan 10 t as standert, with heavy-duty nets built to order well beyond that — the tens-of-tonnes class is a build, not a catalogue item.

De koarte ferzje. Standard certified range 0.5–10 t at 7:1. Above that the net is built to order: wider or duplex bands, more lifting points, a spreader beam in the assembly — and its working load limit comes off the test bed, per net, not off a table.

Wêrom nylon, and why flat webbing

Three things separate this construction from a rope net: the shape of the bearing face, de fiber, and the way the load is shared.

  • Flat band, breed gesicht. IN 50 mm band lies against the cargo along its whole width. A wire rope touches on a line a few millimetres wide and concentrates everything into it — that is what dents a painted panel or bursts a paper sack.
  • Nylon takes the shock. Nylon (PA) stretches further before it parts than polyester, so a load that lands or swings is absorbed rather than transmitted to the hook. Where the lift is a steady, repetitive crane cycle, polyester is the lower-stretch choice; where the cargo is slammed down on a quay, nylon is the more forgiving net.
  • Load shared across the lattice. Every band under the load carries a share, so the net does not depend on four hard points. That is also why the same net can hold a bag stack, a pallet of bricks or a bundle of plate without repacking it.
Nylon flat webbing cargo net spread on the ground showing the reinforced border and lifting loops
The same net laid flat: folded double-stitched border round the perimeter, lifting loops stitched through it.

What “tens of tonnes” actually means

IN 30 t net is not a 3 t net made bigger. Capacity is built up from four things, and each of them has to move together:

Tafel 1 — How the build changes with the load
Load band Band / bouwe Mesh Opheffen punten What else changes
0.5 - 2 t 25–50 mm single layer 50-100 mm 4 hoeken One-person handling, light cargo, bags and small parts
2 - 5 t 50 mm single layer, double-stitched border 100 mm 4 hoeken The standard port and warehouse net
5 - 10 t 50-75 mm, duplex bands on the load-bearing run 100 mm 4 hoeken, 8 op oanfraach Heavier border, reinforced loops, thicker stitch pattern
10 - 30 t 75–100 mm duplex, band count set by the load face 100-150 mm 8 points Spreader beam or master link in the assembly; net built to drawing
30 t en boppe 100 mm duplex or multi-layer, band spacing engineered to the load 150-200 mm 8 points or more Built and proof-tested to the lift, certificate per net

Load bands and build steps are our standard practice; the rating of any net above 10 t is fixed by its own proof test, and we quote it from that certificate.

The arithmetic behind it is plain: a band has a certified strength, the load face has a known number of bands beneath it, and the assembly is rated at the lowest of the band run, the corner loops, the master link and the sling above it. Add bands, widen them, double them, and the net grows; but the corner loops and the hardware have to grow with it, which is why the big nets are designed as a whole rather than bought by the metre.

Flat webbing against wire rope

This is the comparison buyers usually arrive with, and it is worth stating plainly — including where the wire net still wins.

Tafel 2 — What changes when the net is webbing instead of wire
Nylon plat webbing net Wire tou lading net
Contact with the cargo Flat band, breed gesicht, non-marking Line kontakt, merken en dents
Effect on packaging Paper sacks, cartons and shrink wrap survive Sacks burst, cartons crush at the rope line
Gewicht One person carries and folds a 2.5 × 2.5 m net Needs two people and lifting gear
Corrosie Rustfrij, suited to quays and offshore decks Needs galvanised or stainless rope
Edge and cut resistance Goed, but sharp plate and flame need a sleeve or pad Very high — the reason wire nets survive scrap yards
Reparaasje Re-stitch or replace a band; no swaging Cut and re-splice by a rigger
Handling noise and injury risk Quiet, no wire spikes Loud, and wire spikes cut gloves
Webbing cargo net rigged across a container opening to retain the load
Rigged in a container: the same lattice restrains as well as it lifts.

Spesifikaasje

The table is the standard nylon flat webbing net. Band breedte, laach telle, mesh, net grutte, lifting points and printing are all made to order, so read it as the starting point for a quotation rather than a fixed catalogue.

Tafel 3 — Heavy duty nylon flat webbing cargo net
Parameter Spesifikaasje
Type Open flat webbing lattice, no closed bottom; four or eight lifting points
Band materiaal 100 % hege-sterkte nylon (PA); polyester (HÚSDIER) of polypropylene (PP) op oanfraach
Band breedte 25 / 30 / 50 / 75 / 100 mm
Band dikte 1.5 - 3.2 mm ôfhinklik fan breedte
Band laach Inkel, of duplex (dûbele laach) for abrasion resistance and higher capacity
Mesh iepening 50 - 300 mm; 100 × 100 mm standert
Mesh form Square (standert) or diamond on request
Netto grutte 1.0 × 1.0 m oan 4.0 × 4.0 m standert; 2.5 × 6 m and any size to drawing
Rated kapasiteit 0.5 - 10 t standert; heavier nets built to order and rated from their own proof test
Feiligens faktor 7:1
Border en hoeken Folded double-stitched border; reinforced lifting loops, four or eight
Kleur Oranje hege sichtberens standert; blau, swart, grien of oanpast
Behanneling UV-resistant and anti-aging; abrasion-resistant finish
Wurktemperatuer -40 °C oant +100 °C (polyester); nylon lower at the top end — tell us the duty
Markearje WLL, net grutte, mesh and date stitched on a label; WLL and brand printable on the band
Sertifisearring CE / GS / HY / ISO 9001 wurket; breaking-load test on our own 1000 t masine
HS koade 630790

Standert maten

Tafel 4 — Nets we build most often
Netto grutte Typyske kapasiteit Typical load
1.0 × 1.0 m 0.5 - 2 t Machine dielen, drums, lytse pallets
2.5 × 2.5 m 2 - 5 t Palletisearre en ynpakte lading, container work
2.5 × 6 m 4 - 10 t Lange lading, pipe and plate bundles, truck beds
4.0 × 4.0 m 5 - 10 t Bulk bags, stacked sacks, dek lading
Boud foar tekenjen 10 t and well above Hold, flat rack, spreader and plant dimensions
Flat nylon webbing cargo net with square mesh ready for a palletised load
A pallet-sized net: útlein, load set down, four loops on the hook — no strapping of individual pieces.

Where the soft face pays for itself

  • Painted and coated steel — plate packs, coated tube, galvanised sections: no rope line to score the finish.
  • Bagged and boxed cargo — fertiliser, semint, nôt, resin: the flat band does not cut into the bag.
  • Machined and plated parts — no dent, no wire mark, no rework before dispatch.
  • Marine and offshore transfer — rust-free, UV-behannele, quiet on a moving deck.
  • Container stuffing en de-stuffing — light enough to pull around the cargo and fold away afterwards.
Flat webbing cargo net lifting a stack of bagged goods from its four corner loops
Lifting bagged goods: the weight is carried across every band under the load, not on four contact points.

It is not the right tool everywhere, en it is it wurdich te sizzen: a webbing net is not a scrap-yard net. Sharp plate edges, torn steel and hot slag will cut or burn a band. Where the cargo is sharp, the net is supplied with edge sleeves or a heavier wear band, and the sleeves are inspected with the net.

Rigging it so the load stays inside the mesh

  • Lay the net out flat, set the load down inside the mesh and keep it clear of the border — the border is stitch, not bearing face.
  • Gather all the lifting loops onto the hook, master ring or spreader; never lift on fewer loops than the net was built with.
  • With eight points, use a spreader or two matched slings so the load is shared evenly; a net pulled from four points only will lift less than its rating allows.
  • Square the mesh under the load before taking up slack, so the bands line up with the load face instead of pulling diagonally.
  • Never drag a load sideways with the net, and never use it as a tow or lashing substitute for a load it was not rated for.

Markearje, printsjen en identifikaasje

Every net leaves with a sewn label carrying the working load limit, de netto grutte, the mesh and the date. On top of that the band itself can be printed — WLL, net number, fleet code and your own brand — which matters where a yard runs a hundred nets and needs to know at a glance which one is which, and where an inspector needs the rating without hunting for a tag.

Ynspeksje en pensjoen

  • Read the label before the lift and confirm the load is inside the rating for the way the net is rigged.
  • Check every load-bearing band for cuts, abrasion, gemyske kleuring, heat glazing and broken stitching; check the border and the loops most carefully — that is where wear starts.
  • Check the printing is still legible: an unreadable WLL is a net out of service.
  • Retire the net if a band, the border or a loop is damaged, or if the mesh has been distorted by an overload. Never knot, weld or heat-repair a webbing net.
  • Bewarje skjin en droech, út 'e grûn en út direkte sinne, and have the net examined by a competent person at the interval your site sets.
Corner detail of a flat webbing cargo net showing the double-layer border and reinforced corner loop
Hoek detail: two-layer stitched border and the reinforced loop the hook or master ring lifts from — the first place a net wears.

Faak frege

Can a webbing net really lift tens of tonnes?

Ja, as a build rather than a stock item. Bands get wider and duplex, the band count under the load face goes up, lifting points go from four to eight, and a spreader or master link joins the assembly. Each net of that class is proof-tested and its WLL is taken from the test, so ask for the certificate rather than a catalogue figure.

Will it mark painted or galvanised cargo?

No — that is the main reason buyers move from wire rope to webbing. The band presents a flat, soft face over its full width; a wire net concentrates the same load on a line a few millimetres wide. What a webbing net will not tolerate is a sharp edge, which is what the sleeves are for.

Nylon of polyester?

Nylon for shock and impact — slamming a load down, rough quay handling, cargo that swings. Polyester where the lift is steady and repetitive and you want the least stretch under load. Polypropylene for wet or chemical duty and where weight matters most.

What mesh should I take?

100 × 100 mm covers bags, bakstiennen, doazen, drums en lytse komponinten. Go smaller (50-75 mm) for loose small parts, and larger (150-200 mm) on big heavy nets where band strength matters more than containment.

How is the capacity proven?

Every net is breaking-load tested on our own 1000 t machine and supplied with a capacity label and a material test report; our works hold CE, GS, JIS and ISO 9001 sertifisearring, and the test facilities are CNAS and DNV recognised.

Can you print our brand and the WLL on the band?

Ja. WLL, net grutte, fleet number and your own brand can be printed along the band, with a sewn label as well. That is the usual request from distributors and from yards that run a fleet of nets.

In offerte oanfreegje

Stjoer de lading, not just a size

The cargo — what it is, hoe't it ynpakt is, and its weight as presented for the lift;

The load face — length × width, and whether the net must contain it or only hold it together;

The lifting arrangement — four or eight points, heak, master ring or spreader, and the sling above;

The environment — quay, container, offshore deck, or a coated and painted product;

The paperwork — CE marking, test report and own-brand printing if you need them.

Send the load and the net size for a quotation →

Wêr te gean neist

Lift Sling Rigging Company · Lifute Industrial Park, Taizhou City, Jiangsu Provinsje, Sina · HS koade 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Lit jo berjocht

Rôlje nei Top