Catégories de produits

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Brève description:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Élingue ronde d'une tonne.

50 t heavy duty polyester endless round sling: 50,000 kg par jambe, 350,000 kg à 7:1, pas de métal dans le chemin de charge. Fabriqué à la longueur, proof loaded to EN 1492-2.

Détail du produit

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Élingue ronde d'une tonne.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t charge de rupture 1–30 m longueur efficace 7:1 facteur de sécurité
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

UN 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Il n'y a pas de fin, pas d'yeux, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Nous le construisons à partir de 1 m à 30 m effective length, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the élingue ronde gamme. The tier below is the 40 élingue ronde d'une tonne; the tier above is the 60 élingue ronde d'une tonne. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
UN 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Qu'est-ce que 50 t figure actually buys you

The number on the sleeve is the working load limit of une jambe, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.

  • The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
Tableau 1 — What one 50 t round sling carries, by arrangement (DANS 1492-2 facteurs de mode)
Configuration Facteur Capacité
Une écharpe, verticale × 1.0 50 t
Une écharpe, étouffé × 0.8 40 t
Une écharpe, basket at 0–7° × 2.0 100 t on the sling
Une écharpe, basket at 7–45° × 1.4 70 t on the sling
Une écharpe, basket at 45–60° × 1.0 50 t
Deux élingues, 0–45° de la verticale × 1.4 70 pas réglé
Four slings, 0–45° de la verticale × 2.1 105 pas réglé

Read the table from the load backwards. UN 50 t charger sur deux jambes a besoin 50 t slings at 0–45° (70 pas réglé) et 60 t slings once the legs pass 45°. Deux 30 t slings do not make 60 t, and two 40 t les élingues portent 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Où 50 t sits against the tiers either side

At this size the sling is rarely the weak link: le crochet, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tableau 2 — Single-leg rating against what a pair actually carries
Fronde Verticale, une jambe Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, avec marge
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Un seul 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Une écharpe ronde, c'est deux articles en un, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: coupes, chicots, vitrage, coloration chimique, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Le robuste est une construction, pas une note

The phrase describes the sleeve and the standard of make. UN 50 La fronde est 50 quelle que soit la manche; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the écharpe ronde à double manche — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Pas de métal, pas de fin, no stitching in the load path — the loop is the sling.

Un corps raide a besoin d’espace

UN 50 Le corps ne se plie pas autour d'un rayon serré comme un 10 on le fait. Comme règle de travail, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, un poutre de levage pour rapprocher les jambes de la verticale, ou un écharpe ronde avec yeux made to a measured length.

Paramètres techniques

Tableau 3 — 50 t heavy duty polyester round sling, spécification standard
Paramètre Spécification
Produit 50 t heavy duty polyester lifting sling, élingue ronde sans fin, 50,000 kg round lifting sling
Construction Continuous parallel filament core in a woven tubular sleeve, fermé dans une boucle sans fin; pas de métal dans le chemin de charge
Cœur Polyester haute ténacité (PSE) multifilament, pose parallèle, ciré
Manche Heavy duty woven high-tenacity polyester, single layer as standard; double sleeve to order
Limite de charge de travail 50,000 kilos (50 t), une seule jambe, verticale
Charge de rupture 350,000 kg à un 7:1 facteur
Facteur de sécurité 7:1 en standard; other factors produced to order where the market requires
Allongement à WLL Approximately 2–3 %
Température de service −40 °C à +100 °C
Longueur efficace 1–30 m made to order; minimum length applies at this capacity
Couleur Orange en standard; autres couleurs de manches sur commande
Marquage WLL and length printed on the sleeve; étiquette cousue avec WLL, longueur, en série, norme et date
Standard DANS 1492-2 et ASME B30.9 pratiques de construction
Essai Preuve chargée avant expédition; enregistrement de test correspondant au numéro de série
Emballage Bobine dans un sac en polyéthylène, carton étiqueté; palette ou caisse sur demande
Quantité minimale de commande & OEM Faible MOQ pour une commande à l'essai; OEM sur la longueur, couleur des manches, fibre centrale, mise en page et emballage des étiquettes
Body diameter and unit mass follow the length and the sleeve option, et figurent sur le dessin délivré avec le devis. Au-dessus de 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Longueur: effective length or circumference

Une fronde sans fin n'a pas de fin, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, et à 50 t it is an expensive one to correct after the event.

Tableau 4 — The two length conventions
Cité comme You receive Utilisé pour
Longueur de travail efficace La moitié de la circonférence – accrochez-vous à la charge et reculez Ascenseurs verticaux et étranglés, where the hanging height is known
Circonférence La longueur totale de la boucle Ascenseurs à paniers, where the girth of the load drives the length

UN 4 m effective length is an 8 m boucle. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. Pour un monte-charge, take the girth of the load, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, which is the same as buying a smaller sling.

Marquage, serial and proof-load traceability

Au-dessus de 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • A sewn label carries the WLL, longueur, en série, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: un 12 mon corps, quoted by effective length.

Où un 50 t sling earns its place

At this capacity the sling is chosen for what it does pas do to the load — a wire rope grommet carries the same figure. The difference is contact.

  • Poutres et segments de pont préfabriqués. Une écharpe à chaque extrémité, niveau de la poutre relevée; the sleeve protects the formed face and the chamfer.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformateurs, generators and machine beds. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Blocs de vaisseaux et de modules. Quatre points avec une poutre au-dessus, où l'angle de l'élingue est la variable qui décide de l'ensemble.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspection, care and retirement

Inspecter avant chaque utilisation, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: coupes, chicots, vitrage, melts, coloration chimique.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Étiqueter et imprimer: if the WLL or the length can no longer be read, l'élingue ne peut pas être vérifiée.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, vitrage thermique, a core that has gone stiff or lumpy, chemical attack or a missing label.
  • Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.

Foire aux questions

Can one 50 t élévateur à élingue 100 t dans un panier?

Du côté de la fronde, Oui - 100 t à 0–7°. En pratique le crochet, le lien principal ou la poutre au-dessus doit également être évalué pour 100 t, et à cette taille, la grue n'est généralement pas. C'est pourquoi le panier de 50 t est d'abord une décision d'adhérence et ensuite une décision de capacité.

Do two 50 t élingues ascenseur 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, et 50 t once the legs open past 45°. A genuine 100 t charger sur deux jambes a besoin 75 t élingues, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: faible étirement, good abrasion life, −40 à +100 °C, lowest cost at this rating. UN Noyau UHMWPE is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m ou 8 m?

Dites de quelle convention vous parlez. UN 4 m effective length is an 8 m boucle. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, add the girth of the load to the headroom and quote that.

What documentation comes with the sling?

A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

Non. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Demander un 50 t devis d'élingue ronde

Send the lift, get a drawing and a price

Charge par jambe, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effective length or circumference, l'environnement, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Ascenseur Sling Rigging Co., Ltd · Parc industriel de Lifute, Taizhou, Jiangsu, Chine · Code SH 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Produits associés

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Entreprise de gréage d'élingues de levage · Lifute Industrial Park, Ville de Taizhou, Province du Jiangsu, Chine · Code SH 630790
Tél +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Laissez votre message

Faire défiler vers le haut