Tuotteiden luokat

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Lyhyt kuvaus:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Pyöreä Sling.

50 t heavy duty polyester endless round sling: 50,000 kg per jalka, 350,000 kg klo 7:1, ei metallia kuormitusradalla. Valmistettu pituuteen, proof loaded to EN 1492-2.

Tuotetiedot

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Pyöreä Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg per jalka ja 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t murtuva kuorma 1-30 m tehokas pituus 7:1 turvallisuustekijä
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Ei ole loppuja, ei silmiä, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Rakennamme siitä 1 m to 30 m tehollinen pituus, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, joten kansiossa oleva sertifikaatti kuuluu laatikossa olevalle hihnalle. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the pyöreä hihna alue. The tier below is the 40 tonnin pyöreä hihna; the tier above is the 60 tonnin pyöreä hihna. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Mitä 50 t figure actually buys you

The number on the sleeve is the working load limit of yksi jalka, roikkuu pystysuunnassa. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Kaksi säätöä muuttaa yksijalkaisen figuurin kiinteäksi figuuriksi, and both of them move it.

  • Tila. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Jalkojen kulma. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, koska todellinen kuorma ei koskaan istu täysin symmetrisesti.
Taulukko 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 tilatekijät)
Kokoonpano Tekijä Kapasiteetti
Yksi hihna, pystysuoraan × 1.0 50 t
Yksi hihna, tukehtui × 0.8 40 t
Yksi hihna, basket at 0–7° × 2.0 100 t on the sling
Yksi hihna, basket at 7–45° × 1.4 70 t on the sling
Yksi hihna, basket at 45–60° × 1.0 50 t
Kaksi hihnaa, 0–45° pystysuorasta × 1.4 70 t asetettu
Neljä hihnaa, 0–45° pystysuorasta × 2.1 105 t asetettu

Lue taulukko kuormasta taaksepäin. A 50 t kuormitus kahdelle jalalle tarvitsee 50 t nojaa 0–45° kulmassa (70 t asetettu) ja 60 t slings once the legs pass 45°. Kaksi 30 t silmukat eivät tee 60 t, and two 40 t kantohihnat 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Jossa 50 t sits against the tiers either side

At this size the sling is rarely the weak link: koukku, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Taulukko 2 — Single-leg rating against what a pair actually carries
Rintareppu Pystysuora, yksi jalka Two legs at 0–45° Valittu milloin
30 t 30 t 42 t Up to about 40 t kahdella jalalla, with margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Yksittäinen 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Pyöreä hihna on kaksi tuotetta yhdessä, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, vahattu ja levitetty ilman vääntöä; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: leikkauksia, hankaluuksia, lasitus, kemiallinen värjäys, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Raskas käyttö on rakenne, ei arvosana

The phrase describes the sleeve and the standard of make. A 50 t rintareppu on 50 t mikä tahansa hiha; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the kaksinkertainen pyöreä hihna — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Ei metallia, ei loppua, no stitching in the load path — the loop is the sling.

Jäykkä vartalo tarvitsee tilaa

A 50 t runko ei taivu tiukan säteen ympärillä tavalla a 10 t yksi tekee. Toimivana sääntönä, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tiukkaan geometriaan vastataan yleensä pidemmällä rungolla, a nostopalkki tuomaan jalat lähemmäksi pystysuoraa, tai a pyöreä silmukkahihna tehty mitattuun pituuteen.

Tekniset parametrit

Taulukko 3 — 50 t heavy duty polyester round sling, vakiospesifikaatio
Parametri Erittely
Tuote 50 t heavy duty polyester lifting sling, loputon pyöreä hihna, 50,000 kg pyöreä nostohihna
Rakentaminen Jatkuva yhdensuuntainen filamenttiydin kudotussa putkimaisessa holkissa, sulkeutuneena loputtomaan silmukkaan; ei metallia kuormitusradalla
Ydin Kestävää polyesteriä (PES) multifilamentti, yhdensuuntainen asettaminen, vahattu
Hiha Kestävää kudottua lujaa polyesteriä, yksi kerros vakiona; kaksinkertainen hiha tilauksesta
Työkuormitusraja 50,000 kg (50 t), yksi jalka, pystysuoraan
Murtuva kuorma 350,000 kg klo a 7:1 tekijä
Turvallisuustekijä 7:1 vakiona; muut tekijät, jotka valmistetaan tilauksesta markkinoiden sitä vaatiessa
Pidentymä WLL:ssä Approximately 2–3 %
Palvelulämpötila -40 °C:sta +100 °C
Tehokas pituus 1–30 m made to order; vähimmäispituus koskee tätä kapasiteettia
Väri Oranssi vakiona; muut hihan värit tilauksesta
Merkintä WLL ja pituus painettu hihaan; ommeltu tarra WLL:llä, pituus, sarja, standardi ja päivämäärä
Vakio IN 1492-2 ja ASME B30.9 rakennuskäytäntö
Testaus Todiste ladattu ennen lähettämistä; sarjanumeroa vastaava testitietue
Pakkaus Kela polypussissa, merkitty laatikko; lava tai laatikko pyynnöstä
MOQ & OEM Alhainen MOQ koetilaukselle; OEM pituuden suhteen, hihan väri, ydinkuitua, tarran asettelu ja pakkaus
Rungon halkaisija ja yksikköpaino noudattavat pituutta ja hihavaihtoehtoa, ja ne näkyvät tarjouksen mukana annetussa piirustuksessa. Edellä 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Pituus: tehollinen pituus tai ympärysmitta

Loputtomalla hihnalla ei ole päätä, so its length can be quoted two ways and the two are a factor of two apart. Tämä on yleisin tilausvirhe pyöreässä hihnassa, ja klo 50 t se on kallista korjata tapahtuman jälkeen.

Taulukko 4 — The two length conventions
Lainattu nimellä Saat Käytetään
Tehokas työpituus Puolet ympärysmitta - kiinnitä kuormaan ja takaisin ylös Pysty- ja tukinostimet, missä ripustuskorkeus tiedetään
Ympärysmitta Koko silmukan pituus Korinnostimet, missä kuorman ympärysmitta ohjaa pituutta

A 4 m tehollinen pituus on an 8 m silmukka. On our slings the figure printed on the sleeve is the effective length, joten tuloste ja lainaus ovat aina samaa mieltä. Korihissille, ota kuorman ympärysmitta, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, mikä on sama kuin pienemmän hihnan ostaminen.

Merkintä, serial and proof-load traceability

Edellä 10 t the colour code stops identifying the sling, niin klo 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Ommeltu tarra sisältää WLL:n, pituus, sarja, standardi ja valmistuspäivämäärä; sarja yhdistää fyysisen hihnan sen paperityöhön.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Kuitusertifikaatti ja eräluvut ovat saatavilla pyynnöstä; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m vartalo, quoted by effective length.

Missä a 50 t sling earns its place

At this capacity the sling is chosen for what it does ei do to the load — a wire rope grommet carries the same figure. Erona on kontakti.

  • Elementtipalkit ja siltasegmentit. Yksi hihna kummassakin päässä, palkki nostettu tasolle; holkki suojaa muodostunutta pintaa ja viistettä.
  • Steel coils and plate packs. Kori pakkauksen alla, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Muuntajat, generaattorit ja konepellit. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Laiva- ja moduulilohkot. Nelipiste, jonka yläpuolella on palkki, jossa nostokulma on muuttuja, joka päättää joukon.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Tarkastus, hoito ja eläke

Tarkasta ennen jokaista käyttöä, ja muodollisesti järjestelmäsi edellyttämällä aikavälillä. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: leikkauksia, hankaluuksia, lasitus, melts, kemiallinen värjäys.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: jos WLL:tä tai pituutta ei voi enää lukea, hihnaa ei voida tarkistaa.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, lämpölasitus, ydin, joka on jäykkä tai kokkautunut, chemical attack or a missing label.
  • Säilytä kierrettynä ja irti lattiasta, poissa päivänvalosta ja poissa kuumuudesta, liuottimia ja hitsausroiskeita; älä koskaan säilytä kantohihnaa märkänä suljetussa pussissa, and never drag one under load.

Usein kysytty

Can one 50 t nostohihna 100 t korissa?

On the sling side, kyllä ​​— 100 t 0-7°. Käytännössä koukku, päälinkki tai sen yläpuolella oleva palkki on myös arvioitava 100 t, ja tässä koossa nosturi ei yleensä ole. Siksi kori klo 50 t on ensin pitopäätös ja toiseksi kapasiteettipäätös.

Tee kaksi 50 t nostohihnat 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, ja 50 t once the legs open past 45°. A genuine 100 t kuormitus kahdelle jalalle tarvitsee 75 t silmukat, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: matala venytys, hyvä kulutuskestävyys, −40 to +100 °C, lowest cost at this rating. A UHMWPE ydin is worth it where the sling’s own weight is the problem — long bodies, korkeat valinnat, tai hihna, joka on nostettava tikkaille.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m tai 8 m?

Sano kumpaa sopimusta tarkoitat. A 4 m tehollinen pituus on an 8 m silmukka. For a vertical or choked lift the effective length is the distance from hook to load; korille, lisää kuorman ympärysmitta korkeustilaan ja lainaa se.

Mitä dokumentteja hihnan mukana tulee?

A sewn label carrying the WLL, pituus ja sarja; proof-load-tietue, joka täsmäsi kyseiseen sarjaan; kuitusertifikaatti ja eräluvut pyynnöstä. Kerro meille ennen tilausta, jos markkinasi tarvitsee tietyn vakiomerkinnän.

Can the sleeve be replaced or repaired?

Ei. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Pyydä a 50 t pyöreä rintareppu lainaus

Send the lift, get a drawing and a price

Kuorma per jalka, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Tehokas pituus tai ympärysmitta, the environment, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Kiina · HS-koodi 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Liittyvät tuotteet

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Taizhoun kaupunki, Jiangsun maakunta, Kiina · HS-koodi 630790
Puh +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Jätä viestisi

Vieritä ylös