Tuotteiden luokat

Double Ply Endless Lifting Sling

Lyhyt kuvaus:

Lift sling rigging company produce Double Ply Endless Lifting Sling,3 Ply Endless Nylon Flat Sling,2 Ply Polyester Endless Lifting Sling,Double Ply Endless Nylon Lifting Sling,2-Ply Endless Type Web Sling,2 ply Endless Polyester sling,2-Ply Endless Type Web Sling,2-Ply Endless Lifting Web Sling,2 Ply Endless Polyester Web Sling,3-Ply Endless Polyester Lifting Sling,Three Ply Endless Nylon Sling,,4 Ply Endless sling,4 Ply Endless Polyester Lifting Sling,4 ply Endless Nylon Lifting Sling,Double Ply Endless Webbing Sling,Three Ply Endless Webbing Sling,Four Ply Endless Webbing Sling.

Double ply endless sling: two layers in one band, more capacity at the same width, more cushioning. 1-30 t at 7:1 kaksi YKSI 1492-1; 3-ply and 4-ply to order.

Tuotetiedot

Lift sling rigging company produce Double Ply Endless Lifting Sling,3 Ply Endless Nylon Flat Sling,2 Ply Polyester Endless Lifting Sling,Double Ply Endless Nylon Lifting Sling,2-Ply Endless Type Web Sling,2 ply Endless Polyester sling,2-Ply Endless Type Web Sling,2-Ply Endless Lifting Web Sling,2 Ply Endless Polyester Web Sling,3-Ply Endless Polyester Lifting Sling,Three Ply Endless Nylon Sling,,4 Ply Endless sling,4 Ply Endless Polyester Lifting Sling,4 ply Endless Nylon Lifting Sling,Double Ply Endless Webbing Sling,Three Ply Endless Webbing Sling,Four Ply Endless Webbing Sling.

Endless lifting sling · duplex and multi-ply · 2, 3 ja 4 kerros

Double Ply Endless Lifting Sling

Two layers in the one band: more capacity at the same width, a thicker and more forgiving bearing face, and abrasion reserve behind the first layer. 1 t 30 t at 7:1 kaksi YKSI 1492-1, with 3-ply and 4-ply built to order.

2/3/4 layers in the band 1-30t alue 7:1 kaksi YKSI 1492-1 25-300 mm nauhan leveys
Two yellow double ply endless lifting slings showing the thicker doubled band

 

A double ply endless lifting sling is the duplex build of the closed loop. The band is woven as two layers rather than one, lapped over itself and closed with dense parallel stitching, ilman silmiä, no shackles and no metal anywhere on the article. In the trade it also appears as the 2-ply endless sling, and the same construction carries on upward: the 3-ply and 4-ply endless webbing slings in this range are the same idea with three and four layers in the band.The reason to specify it is not complicated. Capacity on a flat sling comes from width and fibre, and at some point the band is already as wide as the job allows — the load is narrow, the hook is small, the gap is tight. The second layer buys capacity without buying width. The same second layer is also more material between the load and the core of the band, which is what changes the way the sling behaves on an edge, on a coated surface and on anything that bruises.

The trade-off in one line. Duplex gives more capacity at the same width, a stiffer band that sits flatter over an edge, and more abrasion reserve — at the cost of weight and suppleness. Below roughly 6 t, and wherever the loop has to fold into a pocket, the single ply build is the better default.

Kaksi, three and four ply: what the number changes

Ply is the number of layers woven into the one band the loop is made from — not two slings, and not two bands side by side. Each layer added does three things at once, and the third is the one buyers ask about least and notice most:

  • It thickens the section. The band becomes a deeper, stiffer beam in cross-section, which is why it lies down on the load instead of draping over it.
  • It adds capacity at the same width. That is the whole reason duplex exists above the single-ply ladder — the published range runs to 30 t, ja yläpuolella 10 t the ladder itself specifies duplex.
  • It adds cushioning. The extra layers sit between the load and the load-bearing core of the band: contact pressure spreads over a thicker, more compliant stack, and an edge has more material to work through before it reaches anything structural. That is why 3-ply and 4-ply are asked for on precast, machined and coated surfaces rather than on plain steel.
Two yellow double ply endless lifting slings showing the thicker doubled band
Two layers in one band: the same outline as a single ply loop, twice the section, and a stiffer bearing face that sits down on the load.

The four builds, rinnakkain

The comparison below is qualitative on purpose: this site publishes capacities and widths for the single-ply and duplex ladders, and builds 3-ply and 4-ply to order. Paksuus, weight and working load limit for those two are therefore confirmed against the order, not taken from a table on a web page.

Taulukko 1 — Single ply, kaksikerroksinen, 3-ply and 4-ply
Yksikerroksinen Kaksikerroksinen (kaksipuolinen) 3-kerros 4-kerros
Layers in the band Yksi Kaksi Kolme Neljä
osio Thinnest in the range Roughly twice the single-ply section Thicker again Thickest build we make
Capacity at the same width Published ladder Higher — the reason duplex exists above the single-ply range Built to order Built to order
Cushioning on the load Perustaso Noticeably more compliant stack More again The most forgiving face
Käsittely Folds small, tight radius Jäykempi, sits flat on the hook and the load Stiffer again Least supple; carried and stored flat
Where it is asked for General yard work, tight gaps, pienet halkaisijat High capacity in a narrow width, rough edges, heavy abrasion Elementti, machined and coated surfaces Heaviest duty, maximum cushioning
Published data Ladder on the single ply page Ladder and ply column on this page Confirmed on the acknowledgement Confirmed on the acknowledgement

Kapasiteetti: where the ply column turns over

Working load limits are straight lift at 7:1 kaksi YKSI 1492-1, with the ply column exactly as this site publishes it. Read it as an instruction, not a menu: alkaen 2 t upward either build will do, ja yläpuolella 10 t the ladder itself says duplex.

Taulukko 2 — Published capacity ladder with the ply column
WLL, suora nosto Väri Viiteleveys Ply Pituusalue tukehtui (× 0.8)
1 t Violetti Vahvista tilauksesta Single 0.5 – 100 m 0.8 t
2 t Vihreä 50 mm Single / kaksipuolinen 1 – 100 m 1.6 t
3 t Keltainen 75 mm Single / kaksipuolinen 1 – 100 m 2.4 t
4 t Harmaa 100 mm Single / kaksipuolinen 1.5 – 100 m 3.2 t
5 t Punainen 125 mm Single / kaksipuolinen 1.5 – 100 m 4.0 t
6 t Ruskea 150 mm Single / kaksipuolinen 1.5 – 100 m 4.8 t
8 t Sininen 200 mm Single / kaksipuolinen 2 – 100 m 6.4 t
10 t Oranssi 250 mm Single / kaksipuolinen 2 – 100 m 8.0 t
Edellä 10 t Ei värikoodia Vahvista tilauksesta Duplex tilata Etiketti hallitsee

The range as a whole runs 1 t 30 t, 25 mm asti 300 mm ja leveämpi, finished loops 0.5 m to 100 m, klo 7:1 standard with 5:1, 6:1 ja 8:1 tilata. Final width, ply and finished weight are confirmed on the order acknowledgement.

Four endless slings in white, violetti, green and black showing the EN 1492-1 värikoodi
Colour marks the capacity band, not the ply: violetti 1 t, vihreä 2 t, ja yläpuolella 10 t no colour code at all — the label is then the only rating.

Where the second layer earns its keep

Duplex and the heavier plies are bought for four situations, and in each one a wider single band is either impossible or second best:

  • The capacity does not fit the width. A narrow load or a small hook caps the band width; the ply is what is left to raise the figure.
  • The edge is rough rather than sharp. Not a burr that will cut — the kind of edge that abrades. A doubled band has a second layer behind the first, so wear has further to go before the load path is compromised.
  • The surface must not be bruised. Päällystetty, maalattu, machined or precast faces are where the extra thickness reads as extra cushioning: a thicker, more compliant stack over the same footprint.
  • The band must sit flat. A duplex band is stiffer and lies down across a plate or a machined face instead of curling up at the edges, which keeps the contact full width.

Three and four ply, honestly

The 3-ply and 4-ply endless slings in this range are the same construction taken further: a third and a fourth layer in the band, a thicker section again, more capacity at a given width and a more forgiving face. They are built to order. We do not publish a web table for them because the figure depends on the weave, the fibre and the finished width, and a number on a page that has not been proof tested is worse than no number at all.

What we will do is quote them properly: tell us the load, koukku, the width you can live with and the surface you are protecting, and the ply, paksuus, weight and working load limit come back on the acknowledgement with the test certificate behind them.

Heavy white endless lifting sling coiled on a dark background
The doubled band keeps its shape when coiled: less creasing into the weave, and a section that lies flat on the hook.

Yksi liitos, and it is thicker here

Päätön hihna on loputtomasti käytössä, ei saumaton. Nauha kierretään itsensä päälle ja suljetaan tiheillä yhdensuuntaisilla tikkiriveillä, and that lap is the only made connection in the load path. On a multi-ply build the lap is thicker and the stitching passes through more layers, so inspect both faces: katkenneita tai vedettyjä ompeleita, a lap starting to open, and abrasion where the lap crosses an edge.

Past the joint the loop is one continuous band, and on a duplex or 3-ply sling there is no sleeve hiding the core — every part of what is carrying the load is visible on the face. That is the practical difference from a round sling, where only the sleeve can be inspected.

Three hitches, same loop

The label figure is the straight-lift rating and every other arrangement is derived from it. Size to the hitch the crew will rig.

Taulukko 3 — Tilatekijä vetokoukun mukaan
Hitch Tilatekijä Mitä se tarkoittaa paikan päällä
Pystysuora × 1.0 Etikettikuva pätee suoraan
tukehtui × 0.8 A 4 t rikastin tarvitsee a 5 t sling — the wrap grips as the load comes on
Kori, jalat lähellä pystysuoraa × 2.0 Both sides of the loop carry the load and the bearing face is doubled
Kori, 7°–45° × 1.4 As the legs open the rating falls; plan the angle, ei vain paino
Kori, 45°–60° × 1.0 At wide angles the basket advantage is gone

Pituus: circumference or effective working length

Suljetulla silmukalla ei ole mittaavia päitä, so the trade quotes the same sling two ways and they differ by about a factor of two. Circumference is the perimeter of the loop; effective working length is the usable height you get, roughly half the circumference because the loop is doubled when it hangs.

Taulukko 4 — The same sling under both conventions
Lainattu nimellä Mitä se mittaa Sama hihna on yhtä suuri
Ympärysmitta The perimeter of the loop — total band in the article 2 m
Tehokas työpituus Käytettävä korkeus; the loop doubles when it hangs 1 m
Orange heavy duty endless sling folded into a loop on blue cloth
Orange is the 10 t band in the published ladder; from there upward the build moves to duplex rather than to a wider single band.

Kuitu, colour and marking

The standard build is high-tenacity polyester (PES): no more than 3% elongation at the working load limit and 10% murtumassa, so the hook height stays predictable, with a working range of −40 °C to +100 °C. Nylon takes the shock and abrasion duties, polypropylene the wet and the cheap, and UHMWPE and aramid the strength-to-weight and heat cases.

Colour follows EN 1492-1 and marks the capacity band, never the ply — violet 1 t, vihreä 2 t, keltainen 3 t, harmaa 4 t, punainen 5 t, ruskea 6 t, sininen 8 t, oranssi 10 t — with one black transverse stripe per tonne as an optical second check. Edellä 10 t there is no colour code and the sewn label is the only rating: työkuormitusraja, materiaalia, standardi, pituus ja jäljitettävyyskoodi.

White endless webbing sling laid out on gravel showing one lapped joint
One lap, stitched through the doubled band. On a multi-ply sling the joint is thicker, so it is read on both faces rather than one.

Testing and paperwork

Every sling is proof tested on our own 1000 t machine before it leaves Taizhou, and the facilities hold CNAS, CE- ja DNV-sertifiointi, producing to EN 1492-1, ISO 4878 ja JB/T 8521. Each order ships with a test certificate, the blue working load limit label and a packing list; HS koodi 630790. Omien merkkien etiketit, special weave colours and customer packing are available on OEM orders.

Yellow endless sling draped over a rough surface
The extra layer is abrasion reserve: where a single band would wear through the weave in a season, the doubled section has a second layer behind the first.

Usein kysytty

What is the difference between double ply and duplex?

Nothing — they are the same build: two layers of webbing woven into the one band the loop is made from. This site uses duplex in its specification table and double ply in the product name, and both mean two layers.

Does double ply mean double the capacity?

Not literally. Two layers add substantial capacity at the same width, but the figure is set by the finished band and confirmed by proof test — it is not a doubling of the single-ply number. On the published ladder the practical reading is that duplex is what carries the range above 10 t, and what goes on a narrow band where a wide one will not fit.

Why do 3-ply and 4-ply have no table on this page?

Because the figure depends on the weave, the fibre and the finished width, and we would rather quote a combination that has been proof tested than publish a number that has not. Lähetä kuorma, the hitch and the width, and the ply, paksuus, weight and working load limit come back on the acknowledgement with the certificate.

Is more ply really more cushioning?

Kyllä, in the sense that matters on site: more layers mean a thicker, more compliant stack between the load and the load-bearing core of the band, so contact pressure spreads and an edge has more material to work through. That is why 3-ply and 4-ply are specified on precast, machined and coated surfaces rather than on plain structural steel.

Can a double ply sling be choked?

Kyllä - pystysuora, choked and basket all come from the same loop. A stiffer band chokes less tightly than a supple one, so check that the wrap actually beds onto the load; the choked factor of 0.8 applies as it does to any sling.

Will it mark aluminium or painted steel?

Vanne on synteettistä kuitua, eikä mikään liitos kosketa kuormaa, so it will not scratch or burr the way a chain or a wire rope can. Width and ply are the two protection measures: a wider, thicker band spreads the same load over a larger, softer footprint.

Pyydä tarjous

Lähetä kuorma, the hitch and the width you can live with

The load — what it is, its girth at the pick positions, and its surface;

The hitch — vertical, tukahdutettu tai kori, and the leg angle if it is a basket;

The width limit — the narrowest band the hook and the load will accept;

The ply you are considering — duplex, 3-kerros tai 4-kerroksinen, and why;

The length — by circumference or effective working length;

Standardi, destination market and marking, including own-brand labels.

Send the duty and the figure for a quotation →

Minne seuraavaksi

 

Lift Sling Rigging Company · Lifuten teollisuuspuisto, Taizhoun kaupunki, Jiangsun maakunta, Kiina · HS-koodi 630790
Puh +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Jätä viestisi

Vieritä ylös