Lift sling rigging company produce WLL 30T Polyester Round Slings,30 Tonne round sling,30Tonne Endless Polyester Round Sling,30t Round Sling,30 Ton Round Lifting Sling,30 Tonne Polyester Round Sling.
WLL 30T Polyester Round Slings
30,000 kg per leg · 210,000 kg breaking · 7:1 · single or double sleeve · 1–30 m made to length
- 30,000 کیلوگرمWLL, عمودی
- 210,000 کیلوگرمBreaking load
- 7:1فاکتور ایمنی
- 1–30 mEffective length
Thirty tonnes is the point where a round sling stops being rigging and becomes part of the lift plan: it is ordered with a length convention, a proof-load record and a crane study behind it, and almost never as a single leg. These endless slings are rated 30,000 kg vertical — a 30 tonne round sling for precast segments, coils, machine beds and moulds that have to come out of the lift unmarked.
Core in high-tenacity polyester, orange woven sleeve, single or double. Every sling carries its own serial number and is proof loaded before dispatch.
A pair of 30 t slings is not a 60 t set
The figure on the sleeve is one leg, hanging vertically. Almost nobody lifts thirty tonnes on one leg, so the number that decides the lift is the set figure — and at this capacity the arithmetic is where lifts are lost. Two 30 t slings at 45° apart carry 42 تی. Four carry 63 تی, because a four-leg set is calculated on three loaded legs.
| Configuration | در 1492-2 factor | What the set carries |
|---|---|---|
| One sling, عمودی | × 1.0 | 30 تی |
| One sling, choked | × 0.8 | 24 تی |
| One sling, basket at 0–7° | × 2.0 | 60 تی |
| One sling, basket at 7–45° | × 1.4 | 42 تی |
| One sling, basket at 45–60° | × 1.0 | 30 تی |
| Two slings, 0–45° from vertical | × 1.4 | 42 تی |
| Two slings, 45–60° from vertical | × 1.0 | 30 تی |
| Four slings, 0–45° from vertical | × 2.1 | 63 تی |
| Four slings, 45–60° from vertical | × 1.5 | 45 تی |
Mode factors applied to a 30 t single-leg rating. The difference between 42 t and 63 t at the same tonnage is a rigging decision, not a manufacturing one — which is why we ask for the arrangement before the length is fixed.
If the load is heavy enough to need 30 t slings in the first place, it is usually heavy enough to need the next size up once the legs open. الف 55 t load on two legs is a 50 t sling job at 0–45°, and a 60 t sling job beyond it. The table is the cheapest part of the order.
Where a 30 tonne round sling earns its place
- Precast beams and bridge segments. الف 30 t segment picked at each end in a basket: the sleeve protects the formed face and the chamfer, and the round body wraps the lifting loop instead of cutting into it.
- Steel coils at 25–30 t. Coils sit in a basket, where the doubled body gives 60 t of basket capacity and the sling follows the curve of the coil rather than bearing on a single line.
- Transformers, generators and machine beds. Trunnions and lifting holes are small and the surfaces are painted or machined — nothing metal touches the load, and nothing has to be matched to a hook.
- Moulds and dies. Lifting holes are drilled, not designed for a fitting, so a soft loop threaded through the hole is the entire method.
- Skids, frames and offshore baskets. Six to twelve metre bodies, choked at each corner; the sleeve takes the corner abrasion so the core does not.
- Contractor and rental fleets. 30 t covers the gap between a 20 t set and a 50 t lift, which is why it is the size most often held in stock.
یک 8 m body with the working load limit printed on the sleeve. بالا 10 t the colour no longer identifies the sling, so the print and the label are what the person making the lift reads.
Construction at this capacity
The core carries it
The load path is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist. Capacity comes from filament count, not from sleeve width — which is why a 30 t round sling stays slim enough to thread through a lifting eye that a 30 t shackle would never pass.
The sleeve decides its life
A woven polyester sleeve keeps grit, daylight and abrasion off the bundle and carries the marking. الف double sleeve round sling adds one more wear layer between the load and the core at the same 30 t rating — worth it in precast yards, rebar and rental fleets, pointless on a clean indoor lift.
الف 30 t sling is heavy. Coil it on a stillage, move it with the forklift, and never drag it across the yard: most of the wear these slings see happens before they are ever rigged.
پارامترهای فنی
| Product | WLL 30T polyester round slings — endless round sling, 30 tonne round sling, 30,000 kg round lifting sling |
| ساخت و ساز | Continuous parallel filament core enclosed in a woven tubular sleeve, closed into an endless loop; no metal anywhere in the load path |
| Core | High-tenacity polyester (PES) multifilament, parallel lay, waxed |
| Sleeve | Woven high-tenacity polyester, single layer as standard; double sleeve to order |
| محدودیت بار کاری | 30,000 کیلوگرم (30 تی) عمودی, single leg |
| Breaking load | 210,000 kg at a 7:1 factor |
| فاکتور ایمنی | 7:1 as standard; other factors produced to order where the market requires |
| Elongation at WLL | تقریبا. 2–3% |
| Service temperature | -40 درجه سانتیگراد تا +100 درجه سانتی گراد |
| Effective length | 1–30 m, به سفارش ساخته شده است; longer bodies quoted individually |
| رنگ | Orange as standard; other sleeve colours to order |
| علامت گذاری | WLL and length printed on the sleeve; sewn label with WLL, طول, serial, standard and date |
| استاندارد | در 1492-2 and ASME B30.9 construction practice |
| Testing | Proof loaded before dispatch; test record matched to the serial number |
| بسته بندی | Coil in a poly bag, کارتن برچسب دار; pallet or crate on request |
| MOQ & OEM | Low MOQ for a trial order; OEM on length, sleeve colour, core fibre, label layout and packing |
Sling body diameter and unit mass follow the length and sleeve option, and are shown on the drawing issued with the quotation.
Choosing the length — the part that goes wrong
An endless sling has no ends, so its length can be quoted two ways, and the two are a factor of two apart:
| Quoted as | You receive | Used for |
|---|---|---|
| طول کار موثر | Half the circumference — hook down to load and back | Vertical and choked lifts, where the hanging height is known |
| Circumference | The full loop length | Basket lifts, where the girth of the load drives the length |
الف 4 m working length is an 8 m loop. On the slings shown here the printed figure is the effective length. For a basket, take the girth of the load, add the headroom to the hook, and let us do the rest — the body takes the long way round, not the short one, and a sling that only just reaches forces the legs wide, which is the same as buying a smaller sling.
30 t round sling against wire rope and chain
| Polyester round sling | Wire rope grommet | Four-leg chain set | |
|---|---|---|---|
| Weight for the rating | Lightest of the three; carried to the machine by hand | Heavier, and stiff to handle | Heaviest, and awkward in a confined lift |
| Contact with the load | Soft and conforming; will not mark paint or machined faces | Steel on steel; marks finished surfaces | Hard contact; dents and edge marks |
| Sharp edges | A limit — needs a protector | Tolerates edges better | Tolerates edges |
| Heat | To +100 درجه سانتی گراد; hotter loads need an aramid or high temperature round sling | Higher | بالاترین |
| Inspection | Sleeve, then label; wear is visible from outside | Internal wire breaks are hard to see in a grommet | Link by link |
| Where it wins | Precast, coils, machine beds, moulds, tight access | Rough, abrasive and hot work | Foundry and repeated heavy abuse |
For a 30 t lift the soft sling is usually chosen for what it does not do to the load, not for what it can carry — all three carry the figure.
Frequently asked
How much can a WLL 30T polyester round sling lift in a basket or a choke?
The sleeve gives the vertical figure of 30 تی. Choked it is 24 تی. In a basket it is 60 t at 0–7°, 42 t at 7–45° and 30 t at 45–60°. The arrangement is part of the rating, not a detail of how it is rigged.
Can I lift 60 tonnes with two 30 tonne round slings?
Not safely. Two legs at 0–45° from vertical carry 42 تی, و 30 t at 45–60°. For a 60 t load on two legs, step to 50 t slings at 0–45° and 60 t slings beyond 45°, or go to the next size in the 40 tonne round sling and above.
What length do I order — 4 متر یا 8 متر?
Say which convention you mean. الف 4 m effective length is an 8 m loop. For a vertical or choked lift, the effective length is the distance from hook to load. For a basket, add the girth of the load to the headroom and quote that.
Is it available in UHMWPE or aramid?
بله. The same 30 t body is built with a UHMWPE round sling core where the sling’s own weight matters, and with an aramid round sling core or a heat-resistant sleeve for hot loads.
What documentation comes with the sling?
A sewn label carrying the working load limit, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking on the label.
بار را به ما بگویید, the pick-up points and the angle
Send the load per leg, ترتیب, the distance between pick-up points and the headroom to the hook. We will confirm capacity, length and sleeve, and quote factory-direct with a sample for trial before volume production.
Request a 30 t round sling quotation
Factory-direct price, drawing, proof-load certificate and a sample sling. Trial orders from low MOQ; OEM on length, رنگ, marking and packing.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, جیانگ سو, China · HS code 630790
Related products