Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonn Round Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

Me ehitame sellest 1 m kuni 30 m efektiivne pikkus, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, nii et kaustas olev sertifikaat kuulub kastis olevale tropile. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the ümmargune tropp ulatus. The tier below is the 40 tonni ümmargune tropp; the tier above is the 60 tonni ümmargune tropp. For the whole heavy series see heavy duty round slings.

Mida 50 t figure actually buys you
The number on the sleeve is the working load limit of üks jalg, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Kaks reguleerimist muudavad ühe jalaga figuuri seatud figuuriks, and both of them move it.
- Režiim. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- Jalade nurk. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, sest tõeline koorem ei istu kunagi ideaalselt sümmeetriliselt.
| Seadistamine | tegur | Mahutavus |
|---|---|---|
| Üks tropp, vertikaalne | × 1.0 | 50 t |
| Üks tropp, lämbunud | × 0.8 | 40 t |
| Üks tropp, basket at 0–7° | × 2.0 | 100 t on the sling |
| Üks tropp, basket at 7–45° | × 1.4 | 70 t on the sling |
| Üks tropp, basket at 45–60° | × 1.0 | 50 t |
| Kaks troppi, 0–45° vertikaalselt | × 1.4 | 70 t seatud |
| Four slings, 0–45° vertikaalselt | × 2.1 | 105 t seatud |
Read the table from the load backwards. A 50 t koormus kahele jalale vajab 50 t slings at 0–45° (70 t seatud) ja 60 t slings once the legs pass 45°. Kaks 30 t slings do not make 60 t, and two 40 t tropid kannavad 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
Kus 50 t sits against the tiers either side
At this size the sling is rarely the weak link: konks, köidikuga, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Sling | Vertikaalne, üks jalg | Two legs at 0–45° | Chosen when |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t on two legs, with margin |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
Üksik 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
Tuum kannab koormust, the sleeve decides the life
Ümmargune tropp on kaks artiklit ühes, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, vahatatud ja keerutamata laotud; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: kärped, tõrked, klaasimine, keemiline värvimine, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Heavy duty is a build, mitte hinnang
The phrase describes the sleeve and the standard of make. A 50 t tropp on 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the kahe varrukaga ümmargune tropp — on a clean indoor lift it is money spent on nothing.

A stiff body needs room
A 50 t body does not bend round a tight radius the way a 10 t one does. Töötava reeglina, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tihedale geomeetriale vastatakse tavaliselt pikema kehaga, a tõstetala et tuua jalad vertikaalile lähemale, või a silmadega ümmargune tropp valmistatud mõõdetud pikkusele.
Tehnilised parameetrid
| Parameeter | Spetsifikatsioon |
|---|---|
| Toode | 50 t heavy duty polyester lifting sling, lõputu ümmargune tropp, 50,000 kg ümmargune tõstetropp |
| Ehitus | Pidev paralleelne filament südamik kootud torukujulises hülsis, suletakse lõputusse ahelasse; koormateel pole metalli |
| Tuum | Kõrge tugevusega polüester (PES) multifilament, paralleelne asetamine, vahatatud |
| Varrukas | Tugev kootud ülitugev polüester, standardvarustuses ühekihiline; kahekordne varrukas tellimisel |
| Töökoormuse piirang | 50,000 kg (50 t), üks jalg, vertikaalne |
| Murdev koormus | 350,000 kg juures a 7:1 tegur |
| Ohutusfaktor | 7:1 standardina; muud eritellimusel toodetud tegurid, kus turg seda nõuab |
| WLL-i pikenemine | Approximately 2–3 % |
| Kasutustemperatuur | −40 °C kuni +100 °C |
| Efektiivne pikkus | 1–30 m made to order; sellel võimsusel kehtib minimaalne pikkus |
| Värv | Oranž standardvarustuses; muud varrukavärvid tellimisel |
| Märgistus | Varrukale trükitud WLL ja pikkus; õmmeldud silt WLL-iga, pikkus, sari, standard ja kuupäev |
| Standardne | IN 1492-2 ja ASME B30.9 ehituspraktika |
| Testimine | Tõend laaditi enne saatmist; seerianumbrile vastav katseprotokoll |
| Pakkimine | Mähis polü-kotis, märgistatud karp; kaubaalus või kast nõudmisel |
| MOQ & OEM | Madal MOQ proovitellimuse jaoks; OEM pikkuse järgi, varruka värv, tuum kiud, sildi paigutus ja pakkimine |
Pikkus: efektiivne pikkus või ümbermõõt
Lõputul tropul pole otsad, so its length can be quoted two ways and the two are a factor of two apart. See on ümmarguse tropi kõige levinum tellimisviga, ja kell 50 t selle pärast sündmust parandamine on kallis.
| Tsiteeritud kui | Sa saad | Kasutatud |
|---|---|---|
| Efektiivne tööpikkus | Pool ümbermõõtu — haake koorma külge ja tagasi üles | Vertikaalsed ja lämbunud tõstukid, kus on teada riputuskõrgus |
| Ümbermõõt | Kogu silmuse pikkus | Korvtõstukid, kus koormuse ümbermõõt juhib pikkust |
A 4 m efektiivne pikkus on an 8 m silmus. On our slings the figure printed on the sleeve is the effective length, nii et trükk ja tsitaat langevad alati kokku. Korvtõstuki jaoks, võta koorma ümbermõõt, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, mis on sama, mis väiksema tropi ostmine.
Märgistus, serial and proof-load traceability
Eespool 10 t the colour code stops identifying the sling, nii kl 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- Õmmeldud etikett kannab WLL-i, pikkus, sari, standard ja valmistamise kuupäev; seriaal on see, mis seob füüsilise tropi selle paberimajandusega.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- Soovi korral on saadaval kiudsertifikaat ja partiid; if your market needs a specific standard marking, say so before the order rather than after.

Kus a 50 t sling earns its place
At this capacity the sling is chosen for what it does mitte do to the load — a wire rope grommet carries the same figure. Erinevus on kontaktis.
- Monteeritavad talad ja silla segmendid. Üks tropp mõlemas otsas, tala tõstetud tase; varrukas kaitseb moodustunud nägu ja faasi.
- Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Trafod, generaatorid ja masinavoodid. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Laeva- ja moodulplokid. Neljapunktiline tala kohal, kus tropi nurk on muutuja, mis määrab hulga.


Ülevaatus, hooldus ja pension
Kontrollige enne iga kasutamist, ja formaalselt teie režiim nõuab. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: kärped, tõrked, klaasimine, melts, keemiline värvimine.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Sildistada ja printida: kui WLL-i või pikkust ei saa enam lugeda, troppi ei saa kontrollida.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, heat glazing, südamik, mis on muutunud jäigaks või tükkideks, chemical attack or a missing label.
- Hoida keritult ja põrandast eemal, päevavalgusest ja kuumusest eemal, lahustid ja keevisõmbluse pritsmed; Ärge kunagi hoidke troppi märjana suletud kotis, and never drag one under load.
Sageli küsitakse
Can one 50 t tropitõstuk 100 t korvis?
Lintside poolel, jah — 100 t 0–7° juures. Praktikas konks, Pealink või selle kohal olev tala tuleb samuti hinnata 100 t, ja sellise suurusega kraanat tavaliselt ei ole. Sellepärast korv kl 50 t on kõigepealt haardeotsus ja teiseks võimsusotsus.
Tehke kaks 50 t tropid lift 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, ja 50 t once the legs open past 45°. A genuine 100 t koormus kahele jalale vajab 75 t tropid, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: madal venitus, hea kulumisiga, −40 kuni +100 °C, lowest cost at this rating. A UHMWPE südamik is worth it where the sling’s own weight is the problem — long bodies, kõrged kirkad, või tropp, mida tuleb redelist üles kanda.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m või 8 m?
Ütle, millist konventsiooni sa silmas pead. A 4 m efektiivne pikkus on an 8 m silmus. For a vertical or choked lift the effective length is the distance from hook to load; korvi eest, lisage koormuse ümbermõõt kõrgusele ja mainige seda.
Mis dokumentatsioon tropiga kaasas on?
A sewn label carrying the WLL, pikkus ja seeria; sellele seeriale sobitatud proovilaadimiskirje; nõudmisel kiusertifikaat ja partiid. Öelge meile enne tellimuse esitamist, kui teie turg vajab konkreetset standardset märgistust.
Can the sleeve be replaced or repaired?
Ei. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Taotlege a 50 t ümmargune tropi tsitaat
Send the lift, get a drawing and a price
Koormus jala kohta, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Efektiivne pikkus või ümbermõõt, keskkond, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute tööstuspark, Taizhou, Jiangsu, Hiina · HS-kood 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
Seotud tooted
- Kõik ümmargused tropid, 1-1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T polüester ümmargused tropid — for 40 t loads on two legs;
- 60 tonni ümmargune tropp — the tier above;
- Heavy duty round sling range — 50 t ja üle selle, heavier sleeves;
- Ümmargune silmadega tropp — a measured length and two pick-up points;
- Lame linttropp — the same rating in a thinner profile;
- Tõstetalad — to keep multi-leg sets closer to vertical.
