Produktkategorier

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kort beskrivelse:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Rund Slynge.

50 t heavy duty polyester endless round sling: 50,000 kg pr ben, 350,000 kg ved 7:1, intet metal i lastvejen. Lavet i længden, proof loaded to EN 1492-2.

Produktdetaljer

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Rund Slynge.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg pr ben og 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t bryde belastning 1–30 m effektiv længde 7:1 sikkerhedsfaktor
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

EN 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. There are no ends, ingen øjne, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Vi bygger det ud fra 1 m til 30 m effektiv længde, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, så certifikatet i mappen tilhører slyngen i kassen. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the rund slynge rækkevidde. The tier below is the 40 ton rund slynge; the tier above is the 60 ton rund slynge. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
EN 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Hvad den 50 t figure actually buys you

The number on the sleeve is the working load limit of et ben, hængende lodret. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. To justeringer gør den enkeltbenede figur til en fast figur, and both of them move it.

  • Tilstanden. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Benvinklen. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, fordi en rigtig belastning aldrig sidder perfekt symmetrisk.
Tabel 1 — What one 50 t round sling carries, by arrangement (I 1492-2 tilstandsfaktorer)
Konfiguration Faktor Kapacitet
En slynge, lodret × 1.0 50 t
En slynge, kvalt × 0.8 40 t
En slynge, basket at 0–7° × 2.0 100 t on the sling
En slynge, basket at 7–45° × 1.4 70 t on the sling
En slynge, basket at 45–60° × 1.0 50 t
To sejl, 0–45° fra lodret × 1.4 70 t sæt
Fire sejl, 0–45° fra lodret × 2.1 105 t sæt

Læs tabellen baglæns fra lasten. EN 50 t belastning på to ben behov 50 t slynger ved 0–45° (70 t sæt) og 60 t slings once the legs pass 45°. To 30 t slynger gør ikke 60 t, and two 40 t slynger bære 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Hvor 50 t sits against the tiers either side

At this size the sling is rarely the weak link: krogen, lænken, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Tabel 2 — Single-leg rating against what a pair actually carries
Slynge Lodret, et ben Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t på to ben, with margin
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

En enkelt 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

En rund slynge er to genstande i én, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, vokset og lagt uden vrid; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: nedskæringer, snasker, ruder, kemisk farvning, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty er en bygning, ikke en vurdering

The phrase describes the sleeve and the standard of make. EN 50 t slynge er 50 t uanset ærmet; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the dobbelt ærmet rund sejl — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Intet metal, ingen ender, no stitching in the load path — the loop is the sling.

En stiv krop har brug for plads

EN 50 Kroppen bøjer ikke rundt om en snæver radius på samme måde som a 10 det gør man. Som en arbejdsregel, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Stram geometri besvares normalt med en længere krop, -en løftebjælke for at bringe benene tættere på lodret, eller a rund slynge med øjne lavet til en afmålt længde.

Tekniske parametre

Tabel 3 — 50 t heavy duty polyester round sling, standardspecifikation
Parameter Specifikation
Produkt 50 t heavy duty polyester lifting sling, endeløs rund slynge, 50,000 kg rund løftesejl
Konstruktion Kontinuerlig parallel filamentkerne i en vævet rørformet ærme, lukket i en endeløs løkke; intet metal i lastvejen
Kerne Polyester med høj styrke (PES) multifilament, parallel lægning, vokset
Ærme Kraftig vævet polyester med høj styrke, enkelt lag som standard; dobbelt ærme på bestilling
Arbejdsbelastningsgrænse 50,000 kg (50 t), enkelt ben, lodret
Brudbelastning 350,000 kg ved a 7:1 faktor
Sikkerhedsfaktor 7:1 som standard; andre faktorer fremstillet på bestilling, hvor markedet kræver det
Forlængelse ved WLL Approximately 2–3 %
Servicetemperatur -40 °C til +100 °C
Effektiv længde 1–30 m made to order; minimumslængde gælder ved denne kapacitet
Farve Orange som standard; andre ærmefarver på bestilling
Mærkning WLL og længde trykt på ærmet; syet etiket med WLL, længde, seriel, standard og dato
Standard I 1492-2 og ASME B30.9 byggepraksis
Afprøvning Bevis indlæst før afsendelse; testrecord matchet med serienummeret
Pakning Coil i en polypose, mærket karton; palle eller kasse på forespørgsel
MOQ & OEM Lav MOQ for en prøveordre; OEM på længde, ærme farve, kernefiber, etiketlayout og pakning
Kropsdiameter og enhedsmasse følger længden og ærmemuligheden, og er vist på tegningen vedlagt tilbuddet. Over 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Længde: effektiv længde eller omkreds

En endeløs slynge har ingen ender, so its length can be quoted two ways and the two are a factor of two apart. Dette er den mest almindelige bestillingsfejl på en rund sejl, og kl 50 t det er dyrt at rette efter arrangementet.

Tabel 4 — The two length conventions
Citeret som Du modtager Bruges til
Effektiv arbejdslængde Half the circumference — hook down to the load and back up Lodrette og chokede løft, hvor ophængningshøjden kendes
Omkreds Hele løkkens længde Kurveløft, hvor lastens omkreds driver længden

EN 4 m effektiv længde er en 8 m sløjfe. On our slings the figure printed on the sleeve is the effective length, så trykket og tilbuddet stemmer altid overens. Til en kurveløft, tage byrdens omkreds, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, hvilket er det samme som at købe en mindre slynge.

Mærkning, serial and proof-load traceability

Over 10 t the colour code stops identifying the sling, så kl 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • En syet etiket bærer WLL, længde, seriel, standard og fremstillingsdato; føljetonen er det, der forbinder den fysiske slynge til dens papirarbejde.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Et fibercertifikat og batch-tal fås på forespørgsel; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: -en 12 m krop, quoted by effective length.

hvor en 50 t sling earns its place

At this capacity the sling is chosen for what it does ikke do to the load — a wire rope grommet carries the same figure. Forskellen er kontakt.

  • Præfabrikerede dragere og brosegmenter. En slynge i hver ende, drager løftet niveau; ærmet beskytter det formede ansigt og affasningen.
  • Steel coils and plate packs. Kurv under pakken, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformere, generatorer og maskinsenge. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
  • Skibs- og modulblokke. Firepunkt med en stråle over, hvor slyngevinklen er den variabel, der bestemmer sættet.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspektion, pleje og pension

Efterse før hver brug, og formelt med det interval dit regime kræver. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: nedskæringer, snasker, ruder, melts, kemisk farvning.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Mærk og print: hvis WLL eller længden ikke længere kan læses, sejlet kan ikke verificeres.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, varmeglas, en kerne, der er blevet stiv eller klumpet, chemical attack or a missing label.
  • Opbevares oprullet og væk fra gulvet, uden for dagslys og væk fra varme, opløsningsmidler og svejsesprøjt; Opbevar aldrig en slynge våd i en lukket pose, and never drag one under load.

Ofte spurgt

Can one 50 t slyngeløft 100 t i en kurv?

På slyngesiden, ja - 100 t ved 0–7°. I praksis krogen, masterlink eller bjælke over den skal også klassificeres til 100 t, og i denne størrelse er kranen normalt ikke. Derfor er kurven kl 50 t er først en grebsbeslutning og derefter en kapacitetsbeslutning.

Gør to 50 t sejlløft 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, og 50 t once the legs open past 45°. A genuine 100 t belastning på to ben behov 75 t slynger, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: lavt stræk, god slidtid, -40 til +100 °C, lowest cost at this rating. EN UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, høje valg, eller en slynge, der skal bæres op ad en stige.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m eller 8 m?

Sig hvilken konvention du mener. EN 4 m effektiv længde er en 8 m sløjfe. For a vertical or choked lift the effective length is the distance from hook to load; for en kurv, tilføj lastens omkreds til frihøjden og citer det.

Hvilken dokumentation følger med sejlet?

A sewn label carrying the WLL, længde og serie; en proof-load record matchet med den serie; et fibercertifikat og batchtal på forespørgsel. Fortæl os inden ordren, hvis dit marked har brug for en specifik standardmærkning.

Can the sleeve be replaced or repaired?

Ingen. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Anmod om en 50 t rund slynge tilbud

Send the lift, get a drawing and a price

Belastning pr. ben, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effektiv længde eller omkreds, miljøet, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industripark, Taizhou, Jiangsu, Kina · HS-kode 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Relaterede produkter

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Taizhou by, Jiangsu-provinsen, Kina · HS-kode 630790
Tlf +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Efterlad din besked

Rul til toppen