Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne Round Sling.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 kg per leg and 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

Gitukod namo kini gikan sa 1 m sa 30 m effective length, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, so the certificate in the folder belongs to the sling in the crate. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the lingin nga lambuyog range. The tier below is the 40 toneladang lingin nga lambuyog; the tier above is the 60 toneladang lingin nga lambuyog. For the whole heavy series see heavy duty round slings.

Unsa ang 50 t figure actually buys you
The number on the sleeve is the working load limit of one leg, hanging vertically. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
| Pag-configure | hinungdan | Kapasidad |
|---|---|---|
| Usa ka lambuyog, patindog | × 1.0 | 50 t |
| Usa ka lambuyog, natuok | × 0.8 | 40 t |
| Usa ka lambuyog, basket at 0–7° | × 2.0 | 100 t on the sling |
| Usa ka lambuyog, basket at 7–45° | × 1.4 | 70 t on the sling |
| Usa ka lambuyog, basket at 45–60° | × 1.0 | 50 t |
| Two slings, 0–45° gikan sa bertikal | × 1.4 | 70 t gibutang |
| Four slings, 0–45° gikan sa bertikal | × 2.1 | 105 t gibutang |
Read the table from the load backwards. A 50 t load sa duha ka mga paa kinahanglan 50 t slings sa 0–45° (70 t gibutang) ug 60 t slings once the legs pass 45°. Duha 30 t slings dili makahimo 60 t, and two 40 t slings dad-on 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
asa 50 t sits against the tiers either side
At this size the sling is rarely the weak link: ang kaw-it, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| Lambuyog | Bertikal, one leg | Two legs at 0–45° | Gipili kung kanus-a |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 t sa duha ka paa, with margin |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
Usa ka single 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
Ang kinauyokan nagdala sa luwan, the sleeve decides the life
Ang lingin nga lambuyog maoy duha ka artikulo sa usa, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, waxed and laid without twist; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: mga pagputol, mga snags, glazing, kemikal nga pagmantsa, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
Ang bug-at nga katungdanan usa ka pagtukod, dili rating
The phrase describes the sleeve and the standard of make. A 50 t sling mao ang 50 t bisan unsa ang manggas; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the double sleeve nga round sling — on a clean indoor lift it is money spent on nothing.

Ang usa ka gahi nga lawas nagkinahanglan og lawak
A 50 t lawas dili moliko sa usa ka hugot nga radius sa dalan a 10 t usa ka. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Ang hugot nga geometry kasagarang tubagon sa mas taas nga lawas, a pag-alsa sa sagbayan to bring the legs closer to vertical, o a lingin nga lambuyog nga adunay mga mata gihimo sa gisukod nga gitas-on.
Teknikal nga mga parameter
| Parameter | Espesipikasyon |
|---|---|
| produkto | 50 t heavy duty polyester lifting sling, walay katapusan nga round sling, 50,000 kg round lifting sling |
| Pagtukod | Padayon nga parallel filament core sa usa ka hinabol nga tubular sleeve, sirado sa usa ka walay katapusan nga loop; walay metal sa load path |
| Core | High-tenacity polyester (PES) multifilament, parallel lay, gi-wax |
| manggas | Bug-at nga katungdanan hinabol high-tenacity polyester, single layer isip standard; doble nga manggas sa pag-order |
| Limit sa karga sa pagtrabaho | 50,000 kg (50 t), usa ka tiil, patindog |
| Pagputol sa load | 350,000 kg sa a 7:1 hinungdan |
| Kaluwasan nga hinungdan | 7:1 isip sumbanan; uban pang mga hinungdan nga gihimo aron mag-order kung diin gikinahanglan sa merkado |
| Elongation sa WLL | Approximately 2–3 % |
| Temperatura sa serbisyo | −40 °C ngadto sa +100 °C |
| Epektibo nga gitas-on | 1–30 m made to order; minimum nga gitas-on magamit niini nga kapasidad |
| Kolor | Orange nga standard; ubang mga kolor sa manggas aron ma-order |
| Pagmarka | WLL ug gitas-on nga giimprinta sa manggas; gitahi nga label nga adunay WLL, gitas-on, serye, standard ug petsa |
| Estandard | SA 1492-2 ug ASME B30.9 nga praktis sa pagtukod |
| Pagsulay | Ang pamatuod gikarga sa wala pa ipadala; test record nga gipares sa serial number |
| Pagputos | Pag-coil sa usa ka polybag, gimarkahan nga karton; pallet o crate sa hangyo |
| MOQ & OEM | Ubos nga MOQ alang sa usa ka order sa pagsulay; OEM sa gitas-on, kolor sa manggas, kinauyokan nga lanot, layout sa label ug pagputos |
Gitas-on: effective length or circumference
Ang walay kataposang lambuyog walay kataposan, so its length can be quoted two ways and the two are a factor of two apart. This is the most common ordering error on a round sling, ug sa 50 t it is an expensive one to correct after the event.
| Quoted as | You receive | Gigamit alang sa |
|---|---|---|
| Epektibo nga gitas-on sa pagtrabaho | Half the circumference — hook down to the load and back up | Vertical and choked lifts, where the hanging height is known |
| sirkumperensiya | The full loop length | Basket lifts, where the girth of the load drives the length |
A 4 m effective length is an 8 m lipod. On our slings the figure printed on the sleeve is the effective length, so the print and the quotation always agree. For a basket lift, take the girth of the load, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, which is the same as buying a smaller sling.
Pagmarka, serial and proof-load traceability
Ibabaw 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- A sewn label carries the WLL, gitas-on, serye, standard and date of manufacture; the serial is what links the physical sling to its paperwork.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- A fibre certificate and batch figures are available on request; if your market needs a specific standard marking, say so before the order rather than after.

Diin a 50 t sling earns its place
At this capacity the sling is chosen for what it does dili do to the load — a wire rope grommet carries the same figure. The difference is contact.
- Precast girders and bridge segments. One sling at each end, girder lifted level; the sleeve protects the formed face and the chamfer.
- Steel coils and plate packs. Basket sa ilawom sa pakete, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- Mga transformer, generators and machine beds. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.


Inspeksyon, care and retirement
Susiha sa dili pa ang matag paggamit, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: mga pagputol, mga snags, glazing, melts, kemikal nga pagmantsa.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- Label ug i-print: if the WLL or the length can no longer be read, ang lambuyog dili mapamatud-an.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, init nga glazing, a core that has gone stiff or lumpy, chemical attack or a missing label.
- Store coiled and off the floor, out of daylight and away from heat, solvents and weld spatter; never store a sling wet in a closed bag, and never drag one under load.
Kanunay nga gipangutana
Can one 50 t sling lift 100 t sa basket?
Sa kilid sa lambuyog, oo— 100 t sa 0–7°. Sa praktis ang kaw-it, master link o beam sa ibabaw niini kinahanglan usab nga ma-rate 100 t, ug sa niini nga gidak-on ang crane kasagaran dili. Mao nga ang basket sa 50 t usa ka desisyon sa pagkupot una ug ikaduha nga desisyon sa kapasidad.
Buhata ang duha 50 t slings mobayaw 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, ug 50 t once the legs open past 45°. A genuine 100 t load sa duha ka mga paa kinahanglan 75 t mga lambuyog, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: ubos nga pag-inat, maayong kinabuhi sa abrasion, −40 ngadto sa +100 °C, lowest cost at this rating. A UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.
What about hot loads?
A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m o 8 m?
Isulti kung unsang kombensiyon ang imong gipasabot. A 4 m effective length is an 8 m lipod. For a vertical or choked lift the effective length is the distance from hook to load; for a basket, add the girth of the load to the headroom and quote that.
What documentation comes with the sling?
A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.
Can the sleeve be replaced or repaired?
Dili. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
Paghangyo a 50 t round sling nga kinutlo
Send the lift, get a drawing and a price
Load kada paa, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
Effective length or circumference, ang palibot, and any sleeve or marking requirement.
Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, China · HS code 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268
May kalabotan nga mga produkto
- Tanan nga lingin nga mga lambuyog, 1–1000 t — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T polyester round slings — for 40 t loads on two legs;
- 60 toneladang lingin nga lambuyog — the tier above;
- Heavy duty round sling range — 50 t ug pataas, heavier sleeves;
- Bilog nga lambuyog nga adunay mga mata — a measured length and two pick-up points;
- Flat webbing sling — the same rating in a thinner profile;
- Pag-alsa sa mga sagbayan — to keep multi-leg sets closer to vertical.
