Kategorije proizvoda

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Kratki opis:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne okrugli remen.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kg at 7:1, nema metala na putu tereta. Izrađen po dužini, proof loaded to EN 1492-2.

Detalji o proizvodu

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Tonne okrugli remen.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 kg po nozi i 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t lomno opterećenje 1–30 m efektivna dužina 7:1 faktor sigurnosti
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Nema kraja, bez očiju, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

Mi ga gradimo od 1 m to 30 m efektivne dužine, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, tako da sertifikat u fascikli pripada slingu u sanduku. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the okrugli remen domet. The tier below is the 40 okrugli remen od tone; the tier above is the 60 okrugli remen od tone. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Šta je 50 t figure actually buys you

The number on the sleeve is the working load limit of jednu nogu, visi okomito. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Dva podešavanja pretvaraju figuru s jednom nogom u postavljenu figuru, and both of them move it.

  • Način rada. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Ugao noge. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, jer pravi teret nikada ne leži savršeno simetrično.
Table 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 faktori moda)
Konfiguracija Faktor Kapacitet
Jedna remena, vertikalno × 1.0 50 t
Jedna remena, ugušen × 0.8 40 t
Jedna remena, basket at 0–7° × 2.0 100 t on the sling
Jedna remena, basket at 7–45° × 1.4 70 t on the sling
Jedna remena, basket at 45–60° × 1.0 50 t
Dva remena, 0–45° od vertikale × 1.4 70 t set
Četiri remena, 0–45° od vertikale × 2.1 105 t set

Očitajte tabelu od opterećenja unazad. A 50 t opterećenje na dvije noge potrebe 50 t slings at 0–45° (70 t set) i 60 t slings once the legs pass 45°. Dva 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Gdje 50 t sits against the tiers either side

At this size the sling is rarely the weak link: kuka, okov, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Table 2 — Single-leg rating against what a pair actually carries
Sling Vertical, jednu nogu Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, sa marginom
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Samac 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Okrugla remena su dva artikla u jednom, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, depiliran i položen bez uvijanja; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: posekotine, snags, zastakljivanje, hemijsko bojenje, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, nije ocjena

The phrase describes the sleeve and the standard of make. A 50 t sling je 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the okrugli remen sa duplim rukavima — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Bez metala, nema kraja, no stitching in the load path — the loop is the sling.

A stiff body needs room

A 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a greda za podizanje to bring the legs closer to vertical, ili a okrugli remen sa očima made to a measured length.

Tehnički parametri

Table 3 — 50 t heavy duty polyester round sling, standard specification
Parametar Specifikacija
Proizvod 50 t heavy duty polyester lifting sling, beskrajna okrugla remena, 50,000 kg okrugli remen za podizanje
Izgradnja Kontinuirana paralelna filamentna jezgra u tkanom tubularnom rukavu, zatvoreno u beskrajnu petlju; nema metala na putu tereta
Core Poliester visoke čvrstoće (PES) multifilament, paralelno polaganje, depiliran
Rukav Heavy duty woven high-tenacity polyester, single layer as standard; dupli rukav po narudžbi
Ograničenje radnog opterećenja 50,000 kg (50 t), single leg, vertikalno
Prekidno opterećenje 350,000 kg na a 7:1 faktor
Faktor sigurnosti 7:1 kao standard; other factors produced to order where the market requires
Izduženje na WLL Otprilike 2–3 %
Servisna temperatura −40 °C do +100 °C
Efektivna dužina 1–30 m made to order; minimum length applies at this capacity
Boja Narandžasta kao standard; ostale boje rukava po narudžbi
Označavanje WLL i dužina otisnuti na rukavu; ušivena etiketa sa WLL, dužina, serial, standard i datum
Standard IN 1492-2 i ASME B30.9 građevinska praksa
Testiranje Dokaz učitan prije slanja; test zapis usklađen sa serijskim brojem
Pakovanje Namotaj u poli vrećici, etiketirani karton; paleta ili sanduk na upit
MOQ & OEM Nizak MOQ za probnu narudžbu; OEM po dužini, boja rukava, jezgro vlakna, izgled etikete i pakovanje
Prečnik tela i jedinična masa prate dužinu i opciju rukava, i prikazani su na crtežu izdatom uz ponudu. Iznad 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Dužina: efektivna dužina ili obim

Beskrajna praćka nema krajeva, so its length can be quoted two ways and the two are a factor of two apart. Ovo je najčešća greška u naručivanju na okruglim remenima, i na 50 t to je skupo ispraviti nakon događaja.

Table 4 — The two length conventions
Citirano kao Vi primate Koristi se za
Efektivna radna dužina Pola obima — zakačite za teret i vratite se nazad Vertikalni i prigušeni liftovi, gdje je poznata visina vješanja
Obim Puna dužina petlje Basket lifts, gdje obim tereta pokreće dužinu

A 4 m efektivna dužina je an 8 m petlja. On our slings the figure printed on the sleeve is the effective length, tako da se štampa i citat uvek slažu. Za podizanje korpe, preuzeti obim tereta, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, što je isto kao i kupovina manjeg remena.

Označavanje, serial and proof-load traceability

Iznad 10 t the colour code stops identifying the sling, so at 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Ušivena etiketa nosi WLL, dužina, serial, standard i datum proizvodnje; serija je ono što povezuje fizički remen sa njegovom papirologijom.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • Certifikat vlakana i brojevi serije dostupni su na zahtjev; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m tijela, quoted by effective length.

Gdje a 50 t sling earns its place

At this capacity the sling is chosen for what it does ne do to the load — a wire rope grommet carries the same figure. Razlika je u kontaktu.

  • Precast girders and bridge segments. One sling at each end, girder lifted level; rukav štiti formirano lice i ikonicu.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformatori, generatori i mašine. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, tako da je meka petlja provučena kroz rupu cijela metoda.
  • Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Inspekcija, njegu i penzionisanje

Pregledajte prije svake upotrebe, i formalno u intervalu koji zahtijeva vaš režim. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: posekotine, snags, zastakljivanje, melts, hemijsko bojenje.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: ako se WLL ili dužina više ne mogu čitati, the sling cannot be verified.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, toplotno zastakljivanje, jezgro koje je postalo kruto ili kvrgavo, chemical attack or a missing label.
  • Čuvajte namotano i odvojeno od poda, van dnevne svetlosti i dalje od toplote, rastvarači i prskanje zavara; nikada ne čuvajte remen mokar u zatvorenoj vrećici, and never drag one under load.

Često pitana

Can one 50 t sling lift 100 t u korpi?

On the sling side, da — 100 t na 0–7°. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

Uradi dva 50 t priveznice lift 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, i 50 t once the legs open past 45°. A genuine 100 t opterećenje na dvije noge potrebe 75 t slings, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: low stretch, dobar vek trajanja abrazije, −40 do +100 °C, lowest cost at this rating. A UHMWPE jezgro is worth it where the sling’s own weight is the problem — long bodies, high picks, ili remen koji se mora nositi uz merdevine.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m ili 8 m?

Recite na koju konvenciju mislite. A 4 m efektivna dužina je an 8 m petlja. For a vertical or choked lift the effective length is the distance from hook to load; za korpu, dodajte opseg tereta u prostor za glavu i navedite to.

What documentation comes with the sling?

A sewn label carrying the WLL, length and serial; a proof-load record matched to that serial; a fibre certificate and batch figures on request. Tell us before the order if your market needs a specific standard marking.

Can the sleeve be replaced or repaired?

br. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Zahtjev a 50 t round sling citat

Send the lift, get a drawing and a price

Opterećenje po nozi, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Efektivna dužina ili obim, okolina, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Kina · HS kod 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Povezani proizvodi

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Rigging Company · Lifute Industrial Park, Taizhou City, Jiangsu Province, Kina · HS kod 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Ostavite svoju poruku

Skrolujte do Vrh