Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 টন গোলাকার স্লিং.
50T Heavy Duty Polyester Lifting Sling Endless Round Sling
50,000 পা প্রতি কেজি এবং 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

আমরা এটি থেকে তৈরি করি 1 মি থেকে 30 মি কার্যকরী দৈর্ঘ্য, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, সুতরাং ফোল্ডারের শংসাপত্রটি ক্রেটের স্লিং-এর অন্তর্গত. The build follows EN 1492-2 and ASME B30.9 practice.
Part of the বৃত্তাকার গুলতি পরিসীমা. The tier below is the 40 টন গোলাকার গুলতি; the tier above is the 60 টন গোলাকার গুলতি. For the whole heavy series see heavy duty round slings.

কি 50 t figure actually buys you
The number on the sleeve is the working load limit of একটি পা, উল্লম্বভাবে ঝুলন্ত. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. Two adjustments turn the single-leg figure into a set figure, and both of them move it.
- The mode. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
- The leg angle. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, because a real load never sits perfectly symmetrically.
| কনফিগারেশন | ফ্যাক্টর | ক্ষমতা |
|---|---|---|
| একটি গুলতি, উল্লম্ব | × 1.0 | 50 t |
| একটি গুলতি, দম বন্ধ করা | × 0.8 | 40 t |
| একটি গুলতি, basket at 0–7° | × 2.0 | 100 t on the sling |
| একটি গুলতি, basket at 7–45° | × 1.4 | 70 t on the sling |
| একটি গুলতি, basket at 45–60° | × 1.0 | 50 t |
| দুটি slings, 0-45° উল্লম্ব থেকে | × 1.4 | 70 t সেট |
| চার গুলতি, 0-45° উল্লম্ব থেকে | × 2.1 | 105 t সেট |
লোড থেকে পিছনের দিকে টেবিল পড়ুন. ক 50 দুই পায়ে লোড প্রয়োজন 50 0-45° এ টি স্লিংস (70 t সেট) এবং 60 t slings once the legs pass 45°. দুই 30 t slings না 60 t, and two 40 t slings বহন 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.
যেখানে 50 t sits against the tiers either side
At this size the sling is rarely the weak link: হুক, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.
| স্লিং | উল্লম্ব, একটি পা | Two legs at 0–45° | যখন বেছে নেওয়া হয়েছে |
|---|---|---|---|
| 30 t | 30 t | 42 t | Up to about 40 দুই পায়ে t, মার্জিন সহ |
| 40 t | 40 t | 56 t | 45–55 t on two legs at a moderate angle |
| 50 t | 50 t | 70 t | 55–65 t on two legs, or unknown weights |
| 60 t | 60 t | 84 t | Legs opening past 45° on a 50–60 t load |
একক 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.
মূল ভার বহন করে, the sleeve decides the life
একটি বৃত্তাকার স্লিং হল একটিতে দুটি প্রবন্ধ, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, মোম এবং মোচড় ছাড়া পাড়া; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.
The sleeve is the inspection window
Because the core cannot be seen, the sleeve is judged instead: কাট, snags, গ্লেজিং, রাসায়নিক দাগ, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.
ভারী দায়িত্ব একটি নির্মাণ, একটি রেটিং না
The phrase describes the sleeve and the standard of make. ক 50 t sling হয় 50 হাতা যাই হোক না কেন; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the ডবল হাতা বৃত্তাকার sling — on a clean indoor lift it is money spent on nothing.

একটি শক্ত শরীরের রুম প্রয়োজন
ক 50 t বডি একটি টাইট ব্যাসার্ধের বৃত্তাকার ভাবে বাঁকানো হয় না a 10 t একজন করে. একটি কাজের নিয়ম হিসাবে, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. আঁটসাঁট জ্যামিতি সাধারণত লম্বা বডি দিয়ে উত্তর দেওয়া হয়, ক উত্তোলন মরীচি পা উল্লম্ব কাছাকাছি আনতে, বা ক চোখ দিয়ে গোলাকার গুলতি একটি পরিমাপ দৈর্ঘ্য তৈরি.
প্রযুক্তিগত পরামিতি
| প্যারামিটার | স্পেসিফিকেশন |
|---|---|
| পণ্য | 50 t heavy duty polyester lifting sling, অন্তহীন বৃত্তাকার স্লিং, 50,000 কেজি রাউন্ড লিফটিং স্লিং |
| নির্মাণ | একটি বোনা টিউবুলার হাতা মধ্যে ক্রমাগত সমান্তরাল ফিলামেন্ট কোর, একটি অন্তহীন লুপে বন্ধ; লোড পাথে কোন ধাতু |
| কোর | উচ্চ দৃঢ়তা পলিয়েস্টার (পিইএস) মাল্টিফিলামেন্ট, সমান্তরাল রাখা, মোমযুক্ত |
| হাতা | ভারি দায়িত্ব বোনা উচ্চ দৃঢ়তা পলিয়েস্টার, স্ট্যান্ডার্ড হিসাবে একক স্তর; অর্ডার করার জন্য ডবল হাতা |
| কাজের লোড সীমা | 50,000 কেজি (50 t), একক পা, উল্লম্ব |
| ব্রেকিং লোড | 350,000 কেজি এ a 7:1 ফ্যাক্টর |
| নিরাপত্তা ফ্যাক্টর | 7:1 মান হিসাবে; বাজারে প্রয়োজন যেখানে অর্ডার উত্পাদিত অন্যান্য কারণ |
| WLL এ দীর্ঘতা | Approximately 2–3 % |
| পরিষেবার তাপমাত্রা | −40 °C থেকে +100 °সে |
| কার্যকরী দৈর্ঘ্য | 1–30 m made to order; ন্যূনতম দৈর্ঘ্য এই ক্ষমতা এ প্রযোজ্য |
| রঙ | মান হিসাবে কমলা; অন্য হাতা রং অর্ডার করতে |
| চিহ্নিত করা | হাতা উপর মুদ্রিত WLL এবং দৈর্ঘ্য; WLL দিয়ে সেলাই করা লেবেল, দৈর্ঘ্য, সিরিয়াল, মান এবং তারিখ |
| স্ট্যান্ডার্ড | IN 1492-2 এবং ASME B30.9 নির্মাণ অনুশীলন |
| টেস্টিং | প্রেরণের আগে প্রমাণ লোড করা হয়; পরীক্ষার রেকর্ড ক্রমিক নম্বরের সাথে মিলেছে |
| প্যাকিং | পলি ব্যাগে কয়েল, লেবেলযুক্ত শক্ত কাগজ; অনুরোধে প্যালেট বা ক্রেট |
| MOQ & ই এম | ট্রায়াল অর্ডারের জন্য কম MOQ; দৈর্ঘ্যের উপর OEM, হাতা রঙ, মূল ফাইবার, লেবেল বিন্যাস এবং প্যাকিং |
দৈর্ঘ্য: কার্যকর দৈর্ঘ্য বা পরিধি
অন্তহীন স্লিং এর কোন শেষ নেই, so its length can be quoted two ways and the two are a factor of two apart. এটি একটি বৃত্তাকার স্লিং-এ সবচেয়ে সাধারণ অর্ডারিং ত্রুটি, এবং এ 50 ইভেন্টের পরে সংশোধন করা ব্যয়বহুল.
| হিসাবে উদ্ধৃত | আপনি গ্রহণ | জন্য ব্যবহৃত |
|---|---|---|
| কার্যকরী কাজের দৈর্ঘ্য | অর্ধ পরিধি — লোড নিচে হুক এবং ব্যাক আপ | উল্লম্ব এবং দম বন্ধ লিফট, যেখানে ঝুলন্ত উচ্চতা জানা যায় |
| পরিধি | সম্পূর্ণ লুপ দৈর্ঘ্য | ঝুড়ি লিফট, যেখানে লোডের ঘের দৈর্ঘ্যকে চালিত করে |
ক 4 m কার্যকরী দৈর্ঘ্য একটি 8 m লুপ. On our slings the figure printed on the sleeve is the effective length, তাই মুদ্রণ এবং উদ্ধৃতি সর্বদা একমত. একটি ঝুড়ি লিফট জন্য, ভার ঘের নিতে, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, যা একটি ছোট স্লিং কেনার সমান.
চিহ্নিত করা, serial and proof-load traceability
উপরে 10 t the colour code stops identifying the sling, তাই এ 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.
- The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
- একটি সেলাই করা লেবেল WLL বহন করে, দৈর্ঘ্য, সিরিয়াল, মান এবং উত্পাদন তারিখ; সিরিয়াল হল যা শারীরিক স্লিংকে এর কাগজপত্রের সাথে সংযুক্ত করে.
- Every sling is proof loaded before dispatch and the test record is matched to that serial.
- একটি ফাইবার শংসাপত্র এবং ব্যাচ পরিসংখ্যান অনুরোধে উপলব্ধ; if your market needs a specific standard marking, say so before the order rather than after.

যেখানে ক 50 t sling earns its place
At this capacity the sling is chosen for what it does না do to the load — a wire rope grommet carries the same figure. The difference is contact.
- প্রিকাস্ট গার্ডার এবং সেতু অংশ. প্রতিটি প্রান্তে একটি গুলতি, গার্ডার উত্তোলিত স্তর; the sleeve protects the formed face and the chamfer.
- Steel coils and plate packs. প্যাকের নিচে ঝুড়ি, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
- ট্রান্সফরমার, generators and machine beds. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
- Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, so a soft loop threaded through the hole is the whole method.
- জাহাজ এবং মডিউল ব্লক. উপরে একটি মরীচি সহ চার-বিন্দু, যেখানে স্লিং কোণ হল পরিবর্তনশীল যা সেটের সিদ্ধান্ত নেয়.


পরিদর্শন, care and retirement
প্রতিটি ব্যবহারের আগে পরিদর্শন করুন, and formally at the interval your regime requires. The check is nearly all on the outside, because that is all there is to see.
- Sleeve along its full length: কাট, snags, গ্লেজিং, melts, রাসায়নিক দাগ.
- Loop ends, where the core turns inside the sleeve, and the stitching at the join.
- লেবেল এবং মুদ্রণ: if the WLL or the length can no longer be read, স্লিং যাচাই করা যাবে না.
- Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
- Retire on any cut through to the core, তাপ গ্লেজিং, একটি কোর যা শক্ত বা গলদ হয়ে গেছে, chemical attack or a missing label.
- কুণ্ডলীকৃত এবং মেঝে বন্ধ সংরক্ষণ করুন, দিনের আলো থেকে দূরে এবং তাপ থেকে দূরে, দ্রাবক এবং জোড় স্প্যাটার; একটি বন্ধ ব্যাগ মধ্যে একটি গুলতি ভেজা সংরক্ষণ করুন, and never drag one under load.
প্রায়ই জিজ্ঞাসিত
Can one 50 টি স্লিং লিফট 100 একটি ঝুড়ি মধ্যে t?
গুলতি পাশে, হ্যাঁ — 100 0-7° এ t. অনুশীলনে হুক, মাস্টার লিঙ্ক বা এর উপরে বিম এর জন্যও রেট দিতে হবে 100 t, এবং এই আকারে ক্রেন সাধারণত হয় না. এ কারণেই ঝুড়ি 50 t একটি গ্রিপ সিদ্ধান্ত প্রথম এবং একটি ক্ষমতা সিদ্ধান্ত দ্বিতীয়.
দুটি করুন 50 t slings উত্তোলন 100 t?
Not at an angle. Two legs at 0–45° from vertical carry 70 t, এবং 50 t once the legs open past 45°. A genuine 100 দুই পায়ে লোড প্রয়োজন 75 t slings, which is why we ask for the arrangement before the price.
Polyester or UHMWPE at this capacity?
Polyester is the general-purpose core: কম প্রসারিত, ভাল ঘর্ষণ জীবন, −40 থেকে +100 °সে, lowest cost at this rating. ক UHMWPE core is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.
What about hot loads?
A standard polyester core is rated to +100 °সে. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.
What length do I order — 4 m বা 8 মি?
আপনি কোন কনভেনশন বলতে চান বলুন. ক 4 m কার্যকরী দৈর্ঘ্য একটি 8 m লুপ. For a vertical or choked lift the effective length is the distance from hook to load; একটি ঝুড়ি জন্য, হেডরুমে লোডের ঘের যোগ করুন এবং উদ্ধৃত করুন.
কি ডকুমেন্টেশন স্লিং সঙ্গে আসে?
A sewn label carrying the WLL, দৈর্ঘ্য এবং সিরিয়াল; একটি প্রুফ-লোড রেকর্ড সেই সিরিয়ালের সাথে মিলেছে; অনুরোধে একটি ফাইবার শংসাপত্র এবং ব্যাচ পরিসংখ্যান. আপনার বাজারে একটি নির্দিষ্ট মান চিহ্নিতকরণ প্রয়োজন হলে অর্ডার করার আগে আমাদের বলুন.
Can the sleeve be replaced or repaired?
না. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.
অনুরোধ ক 50 টি বৃত্তাকার স্লিং উদ্ধৃতি
Send the lift, get a drawing and a price
পা প্রতি লোড, the arrangement and the angle from vertical;
Distance between pick-up points and the headroom to the hook;
কার্যকর দৈর্ঘ্য বা পরিধি, পরিবেশ, and any sleeve or marking requirement.
লিফট স্লিং রিগিং কো., লিমিটেড · লিফ্যুট ইন্ডাস্ট্রিয়াল পার্ক, তাইজৌ, জিয়াংসু, চীন · এইচএস কোড 630790 · Tel +86 523 8693 5818 হোয়াটসঅ্যাপ +86 180 6600 2268
সম্পর্কিত পণ্য
- সব বৃত্তাকার slings, 1-1000 টি — the full range this sling belongs to;
- WLL 40T polyester round slings — the tier below, same build;
- WLL 30T পলিয়েস্টার রাউন্ড স্লিংস — for 40 t loads on two legs;
- 60 টন গোলাকার গুলতি — the tier above;
- Heavy duty round sling range - 50 t এবং উপরে, heavier sleeves;
- চোখ দিয়ে গোলাকার গুলতি — a measured length and two pick-up points;
- ফ্ল্যাট ওয়েবিং স্লিং — the same rating in a thinner profile;
- উত্তোলন beams — to keep multi-leg sets closer to vertical.
