Məhsul Kateqoriyaları

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

Qısa təsvir:

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Dəyirmi Sling.

50 t heavy duty polyester endless round sling: 50,000 kg per leg, 350,000 kq 7:1, yük yolunda metal yoxdur. Uzunluğa uyğun hazırlanır, proof loaded to EN 1492-2.

Məhsul təfərrüatı

Lift sling rigging company produce 50T Heavy Duty Polyester Lifting Sling Endless Round Sling,50t Polyester Lifting Round Sling,50 Ton Dəyirmi Sling.

Endless round sling · EN 1492-2 · 7:1

50T Heavy Duty Polyester Lifting Sling Endless Round Sling

50,000 ayaq başına kq və 350,000 kg before it breaks, in a body with no metal, no ends and no stitching in the load path.

50 t WLL per leg 350 t qıran yük 1–30 m effektiv uzunluq 7:1 təhlükəsizlik faktoru
50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse

A 50T heavy duty polyester lifting sling is an endless round sling: a continuous bundle of high-tenacity polyester filament, enclosed in a woven sleeve and closed into a loop. Sonu yoxdur, göz yox, no stitching in the load path and no fittings. The loop goes round the load rather than onto it, which is why this is the sling chosen for machined plant, painted fabrications, coils and precast — anything where a hard sling would leave a mark that cannot be taken out.

We build it from 1 m-ə qədər 30 m təsirli uzunluq, single or double sleeve, in polyester as standard, with the working load limit and the length printed on the sleeve and a sewn label carrying the serial. Every sling is proof loaded before dispatch and the test record is matched to that serial, ona görə də qovluqdakı sertifikat sandıqdakı sapana məxsusdur. The build follows EN 1492-2 and ASME B30.9 practice.

Part of the dəyirmi sapand diapazon. The tier below is the 40 ton dairəvi sapand; the tier above is the 60 ton dairəvi sapand. For the whole heavy series see heavy duty round slings.

50 t heavy duty polyester endless round sling in an orange sleeve, coiled in a warehouse
A 50 t body in its orange sleeve: the core carries the load, the sleeve carries the marking and takes the wear.

Nə 50 t figure actually buys you

The number on the sleeve is the working load limit of bir ayaq, şaquli asılır. It is what the sling is proof loaded and certified against, and it is where a lifting plan starts — but it is not what the sling will pick up in the arrangement you are actually using. İki düzəliş tək ayaqlı rəqəmi müəyyən edilmiş rəqəmə çevirir, and both of them move it.

  • Rejim. A choke costs 20 %; a basket at a shallow angle nearly doubles the figure; the same sling in a basket at 45–60° is back to its vertical rating.
  • Ayağın bucağı. The wider the legs spread from the hook, the more tension each one sees for the same load. A multi-leg set is also calculated on fewer legs than it has — four legs are taken as three, çünki əsl yük heç vaxt mükəmməl simmetrik oturmaz.
Cədvəl 1 — What one 50 t round sling carries, by arrangement (IN 1492-2 rejim amilləri)
Konfiqurasiya Amil Tutum
Bir sapand, şaquli × 1.0 50 t
Bir sapand, boğulmuş × 0.8 40 t
Bir sapand, basket at 0–7° × 2.0 100 t on the sling
Bir sapand, basket at 7–45° × 1.4 70 t on the sling
Bir sapand, basket at 45–60° × 1.0 50 t
İki sapand, 0-45° şaquli × 1.4 70 t təyin edin
Dörd sapand, 0-45° şaquli × 2.1 105 t təyin edin

Cədvəli yükdən geriyə doğru oxuyun. A 50 t iki ayaq üzərində yük lazımdır 50 t slings at 0–45° (70 t təyin edin) və 60 t slings once the legs pass 45°. iki 30 t slings do not make 60 t, and two 40 t slings carry 56 t — which is why the tier is chosen from the arrangement rather than from the tonnage on the drawing.

Harada 50 t sits against the tiers either side

At this size the sling is rarely the weak link: qarmaq, the shackle, the beam and the lifting point each carry their own rating, and the lift is limited by the lowest one. What the tier table settles is whether you buy 50 t slings or a pair of smaller ones.

Cədvəl 2 — Single-leg rating against what a pair actually carries
Sling Şaquli, bir ayaq Two legs at 0–45° Chosen when
30 t 30 t 42 t Up to about 40 t on two legs, marja ilə
40 t 40 t 56 t 45–55 t on two legs at a moderate angle
50 t 50 t 70 t 55–65 t on two legs, or unknown weights
60 t 60 t 84 t Legs opening past 45° on a 50–60 t load

Bir tək 50 t sling also makes sense where the hook is unknown or a fleet sling has to cover several jobs: the extra tonne of rating costs less than a second body, a second label and a second inspection.

The core carries the load, the sleeve decides the life

Dəyirmi sapand birdə iki məqalədir, and the outer one is what retires it. The core is a parallel bundle of high-tenacity polyester filament, mumlanmış və bükülmədən döşənmişdir; every filament shares the load, which is how a body this slim rates at 50 t. The sleeve is a woven tubular jacket that protects the core from abrasion, from the load and from daylight, and it is what the person making the lift reads.

The sleeve is the inspection window

Because the core cannot be seen, the sleeve is judged instead: kəsiklər, tıxaclar, şüşələmə, kimyəvi boyama, and the loop ends where the core turns. A sleeve cut through so that the core is visible retires the sling even if the core itself looks sound — a sling that cannot be judged cannot be used.

Heavy duty is a build, reytinq deyil

The phrase describes the sleeve and the standard of make. A 50 t sapand edir 50 t whatever the sleeve; a second layer buys wear life rather than capacity. Where the load is abrasive, the yard is rough or the sling is a rental item, specify the ikiqat qollu dəyirmi sapand — on a clean indoor lift it is money spent on nothing.

Endless polyester round sling, orange woven sleeve, studio view
Metal yoxdur, sonu yoxdur, no stitching in the load path — the loop is the sling.

A stiff body needs room

A 50 t body does not bend round a tight radius the way a 10 t one does. As a working rule, a very short body has no slack to seat in the hook and starts to fight the rigging; the minimum length at this rating is confirmed on the drawing issued with the quotation. Tight geometry is usually answered with a longer body, a qaldırıcı şüa to bring the legs closer to vertical, və ya a gözləri olan dəyirmi sapand made to a measured length.

Texniki parametrlər

Cədvəl 3 — 50 t heavy duty polyester round sling, standart spesifikasiya
Parametr Spesifikasiya
Məhsul 50 t heavy duty polyester lifting sling, sonsuz dairəvi sapand, 50,000 kq dəyirmi qaldırıcı sapand
Tikinti Toxunmuş boru qolunda davamlı paralel filament nüvəsi, sonsuz bir döngəyə bağlandı; yük yolunda metal yoxdur
Əsas Yüksək davamlı polyester (PES) multifilament, paralel yatmaq, mumlanmış
qol Heavy duty woven high-tenacity polyester, single layer as standard; Sifarişlə ikiqat qol
İş yükü həddi 50,000 kq (50 t), tək ayaq, şaquli
Qırıcı yük 350,000 kq a 7:1 amil
Təhlükəsizlik faktoru 7:1 standart olaraq; other factors produced to order where the market requires
WLL-də uzanma Təxminən 2-3 %
Xidmət temperaturu -40 °C-ə qədər +100 °C
Effektiv uzunluq 1–30 m made to order; minimum length applies at this capacity
Rəng Standart olaraq portağal; digər qol rəngləri sifarişlə
İşarələmə WLL və qolun üzərində çap olunmuş uzunluq; WLL ilə tikilmiş etiket, uzunluq, serial, standart və tarix
Standart IN 1492-2 və ASME B30.9 tikinti təcrübəsi
Test Sübut göndərilmədən əvvəl yüklənir; test qeydi seriya nömrəsinə uyğundur
Qablaşdırma Poli çantada rulon, etiketli karton; istəyə görə palet və ya sandıq
MOQ & OEM Sınaq sifarişi üçün aşağı MOQ; Uzunluğu üzrə OEM, qol rəngi, əsas lif, etiket tərtibatı və qablaşdırma
Bədənin diametri və vahid kütləsi uzunluq və qol seçiminə uyğundur, və kotirovka ilə verilmiş çertyojda göstərilir. Yuxarıda 10 t the sleeve colour no longer encodes capacity — the print and the label do.

Uzunluq: effektiv uzunluq və ya çevrə

Sonsuz sapandın ucu yoxdur, so its length can be quoted two ways and the two are a factor of two apart. Bu, dəyirmi sapanda ən çox rast gəlinən sifariş xətasıdır, və at 50 t hadisədən sonra düzəltmək bahalıdır.

Cədvəl 4 — The two length conventions
kimi sitat gətirilmişdir alırsınız üçün istifadə olunur
Effektiv iş uzunluğu Çevrənin yarısı - yükə bağlayın və geri çəkin Şaquli və boğulmuş liftlər, asma hündürlüyünün məlum olduğu yerdə
Çevrə Tam döngə uzunluğu Səbət qaldırıcıları, yükün ətrafının uzunluğu hərəkət etdirdiyi yerdə

A 4 m effektiv uzunluq birdir 8 m döngə. On our slings the figure printed on the sleeve is the effective length, buna görə də çap və sitat həmişə uyğun gəlir. Səbət lifti üçün, yükün dairəsini götürün, add the headroom to the hook and quote that: a sling that only just reaches forces the legs wide, bu daha kiçik sapand almaqla eynidir.

İşarələmə, serial and proof-load traceability

Yuxarıda 10 t the colour code stops identifying the sling, belə ki 50 t the print and the label are the only things a rigger can read. Both are part of the specification, not decoration.

  • The working load limit and the effective length are printed on the sleeve in characters sized to be read at arm’s length in a yard.
  • Dikilmiş etiket WLL-ni daşıyır, uzunluq, serial, standart və istehsal tarixi; serial fiziki sapandını sənədləşmə işləri ilə əlaqələndirən şeydir.
  • Every sling is proof loaded before dispatch and the test record is matched to that serial.
  • İstək əsasında lif sertifikatı və partiya rəqəmləri mövcuddur; if your market needs a specific standard marking, say so before the order rather than after.
Large polyester round sling at 12 m effective length on a studio floor
The tier below in the same build: a 12 m bədən, quoted by effective length.

Harada a 50 t sling earns its place

At this capacity the sling is chosen for what it does yox do to the load — a wire rope grommet carries the same figure. Fərq əlaqədir.

  • Precast girders and bridge segments. One sling at each end, girder lifted level; qol formalaşmış üzü və paxarı qoruyur.
  • Steel coils and plate packs. Basket under the pack, sleeve against the plate edge — the round body follows the coil rather than bearing on a line.
  • Transformatorlar, generatorlar və maşın yataqları. Trunnions and lifting holes are small and the surfaces are machined or painted; nothing metal touches the load.
  • Moulds, dies and skids. Lifting holes are drilled rather than designed for a fitting, ona görə də çuxurdan keçən yumşaq ilgək bütün üsuldur.
  • Ship and module blocks. Four-point with a beam above, where the sling angle is the variable that decides the set.
Round sling in a basket around a precast concrete unit
Basket around precast: the sleeve protects the formed face, the doubled body shares the load.
Polyester round sling wrapped around a steel coil
Coil duty: a round body follows the curve instead of bearing on a single line.

Yoxlama, qayğı və pensiya

Hər istifadədən əvvəl yoxlayın, və formal olaraq rejiminizin tələb etdiyi intervalda. The check is nearly all on the outside, because that is all there is to see.

  • Sleeve along its full length: kəsiklər, tıxaclar, şüşələmə, melts, kimyəvi boyama.
  • Loop ends, where the core turns inside the sleeve, and the stitching at the join.
  • Label and print: WLL və ya uzunluq artıq oxuna bilmirsə, sapand yoxlanıla bilməz.
  • Grit inside the sleeve — it abrades the core from within long after the yard has been swept.
  • Retire on any cut through to the core, istilik şüşələri, bərk və ya topaqlaşmış nüvə, chemical attack or a missing label.
  • Kəsilmiş və döşəmədən kənarda saxlayın, gün işığından və istidən uzaqda, həlledicilər və qaynaq sıçrayışı; sapanı heç vaxt nəm halda bağlı çantada saxlamayın, and never drag one under load.

Tez-tez soruşulur

Can one 50 t sapand qaldırıcı 100 t səbətdə?

On the sling side, bəli - 100 t 0-7°-də. In practice the hook, master link or beam above it also has to be rated for 100 t, and at this size the crane usually is not. That is why the basket at 50 t is a grip decision first and a capacity decision second.

İki et 50 t sapan qaldırıcı 100 t?

Not at an angle. Two legs at 0–45° from vertical carry 70 t, və 50 t once the legs open past 45°. A genuine 100 t iki ayaq üzərində yük lazımdır 75 t sapanlar, which is why we ask for the arrangement before the price.

Polyester or UHMWPE at this capacity?

Polyester is the general-purpose core: aşağı uzanma, good abrasion life, -40-a qədər +100 °C, lowest cost at this rating. A UHMWPE nüvəsi is worth it where the sling’s own weight is the problem — long bodies, high picks, or a sling that has to be carried up a ladder.

What about hot loads?

A standard polyester core is rated to +100 °C. Above that the fibre degrades, and the answer is an aramid core or a high temperature round sling rather than a thicker standard sleeve.

What length do I order — 4 m və ya 8 m?

Hansı konvensiyanı nəzərdə tutduğunuzu deyin. A 4 m effektiv uzunluq birdir 8 m döngə. For a vertical or choked lift the effective length is the distance from hook to load; səbət üçün, yükün ətrafını baş boşluğuna əlavə edin və sitat gətirin.

Sling ilə hansı sənədlər gəlir?

A sewn label carrying the WLL, uzunluğu və seriyası; həmin seriyaya uyğun bir sınaq yükü qeydi; tələb üzrə lif sertifikatı və partiya rəqəmləri. Bazarınızın xüsusi standart markalanmaya ehtiyacı olub olmadığını sifarişdən əvvəl bizə bildirin.

Can the sleeve be replaced or repaired?

yox. A sling is proof loaded as a complete article, and re-sleeving or re-stitching voids that record. A damaged sleeve retires the sling; the answer is a new body, or a double sleeve next time.

Sorğu a 50 t dəyirmi sapand kotirovkası

Send the lift, get a drawing and a price

Ayağa düşən yük, the arrangement and the angle from vertical;

Distance between pick-up points and the headroom to the hook;

Effektiv uzunluq və ya çevrə, ətraf mühit, and any sleeve or marking requirement.

Send your lifting details for a quotation →

Lift Sling Rigging Co., Ltd · Lifute Industrial Park, Taizhou, Jiangsu, Çin · HS kodu 630790 · Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268

Əlaqədar məhsullar

Very large round sling body for heavy lift work
The same construction carries the range up to the heaviest lifts.

Lift Sling Arma Şirkəti · Lifute Industrial Park, Taizhou şəhəri, Jiangsu əyaləti, Çin · HS kodu 630790
Tel +86 523 8693 5818 · WhatsApp +86 180 6600 2268 · lift98@jslift.com· xulft.com

 

Mesajınızı buraxın

Yuxarıya sürüşdürün