Lift Sling rigging company 052386933296 Development of lifting heavy vehicles with spreader, car hanging network, lifting large tonnage vehicles without scratches. Trailer heavy truck special spreader, car nylon hanging network.
There is a frame-like support hanging beam, supporting the four corners above the hanging beam are connected with the upper sling, supporting the four corners below the hanging beam are connected under the sling, the lower end of each sling down the two The bottom of the branch sling, the lower end of the branch sling to connect the end of the brackets; the two under the slings in the four slings of the suspended sling as a group, each group being connected under the same slings A branch sling is divided into a branch sling of the other sling of the same group as a group, and the lower end of each branch sling is connected to both ends of the same bar, A connecting chain is connected between the ends of the same side of the two brackets connected to the lower ends of the two branches of the cable.
Support the four beams above the hanging angle hanging ear plate, hanging ear plate connected to the sling; support the following four corners of the hanging beam hanging ear plate, hanging ear plate connected under the sling;
The lower end of each lower sling has a connecting ring, connecting the ring down to connect the two branches sling.
Both ends of the bar have a hanging ear plate, hanging ear plate and branch sling connection.
Between the ends of the same side of the two brackets, the end of a bar is connected with a limit plate, and the chain connected to the same side of the other bar is connected to the stop plate. When used in accordance with the different models of tire diameter, at any time to adjust the chain connection position.